From owner-freebsd-questions Tue Apr 11 17:22:54 2000 Delivered-To: freebsd-questions@freebsd.org Received: from primary.jacobs.org (tstpa1-105.gate.net [207.36.8.105]) by hub.freebsd.org (Postfix) with ESMTP id B0C6537BB0B for ; Tue, 11 Apr 2000 17:22:45 -0700 (PDT) (envelope-from mark@gate.net) Received: from localhost (mark@localhost) by primary.jacobs.org (8.9.3/8.9.3) with ESMTP id UAA00659 for ; Tue, 11 Apr 2000 20:22:40 -0400 (EDT) (envelope-from mark@gate.net) X-Authentication-Warning: primary.jacobs.org: mark owned process doing -bs Date: Tue, 11 Apr 2000 20:22:08 -0400 (EDT) From: jacobsm X-Sender: mark@primary.jacobs.org To: freebsd-questions@FreeBSD.ORG Subject: UGEN0 Device in 4.0 stable Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG When I attempt to access the ugen0 device I get a device not configured error message. I have built and installed a custom kernel with usb options. /dev seems to have the correct devices defined also. Make kernel file extract # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet options UHCI_DEBUG options OHCI_DEBUG options USB_DEBUG options UGEN_DEBUG options UHID_DEBUG options UHUB_DEBUG options UKBD_DEBUG options ULPT_DEBUG options UMASS_DEBUG options UMS_DEBUG Boot Messages Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-STABLE #0: Tue Apr 11 19:44:27 EDT 2000 root@primary.jacobs.org:/usr/src/sys/compile/MAIN Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K7(tm) Processor (648.74-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x612 Stepping = 2 Features=0x81f9ff AMD Features=0xc0400000 real memory = 134152192 (131008K bytes) avail memory = 126529536 (123564K bytes) Preloaded elf kernel "kernel" at 0xc03d0000. Preloaded elf module "splash_bmp.ko" at 0xc03d009c. Preloaded elf module "vesa.ko" at 0xc03d0140. Preloaded splash_image_data "/boot/daemon_640.bmp" at 0xc03d01dc. VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc03821f7 (1000117) VESA: 3dfx Interactive, Inc. Pentium Pro MTRR support enabled md0: Malloc disk npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: <3Dfx Voodoo 3 graphics accelerator> at 5.0 irq 10 pcm0: port 0x1080-0x109f irq 11 at device 3.0 on pci0 pci0: (vendor=0x1102, dev=0x7002) at 3.1 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x1000-0x107f mem 0xe8014800-0xe801487f irq 5 at device 4.0 on pci0 xl0: Ethernet address: 00:50:da:68:68:66 miibus0: on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: supplying EUI64: 00:50:da:ff:fe:68:68:66 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x10e0-0x10ef at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0x10a0-0x10bf irq 11 at device 7.2 on pci0 uhci0: LegSup = 0x0000a030 usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x10c0-0x10df irq 11 at device 7.3 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered isab1: at device 7.4 on pci0 pci0: (vendor=0x14f1, dev=0x1033) at 9.0 irq 10 pci0: (vendor=0x104c, dev=0x8019) at 12.0 irq 5 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP Probing for PnP devices on ppbus0: ppbus0: PRINTER PCL 6 Emulation, PostScript Level 2 Emulation, NPAP, PJL plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ad0: 25768MB [52355/16/63] at ata0-master using UDMA66 acd0: DVD-ROM at ata1-master using PIO4 acd1: CD-RW at ata1-slave using PIO4 Mounting root from ufs:/dev/ad0s3a xl0: starting DAD for fe80:0001::0250:daff:fe68:6866 xl0: DAD complete for fe80:0001::0250:daff:fe68:6866 - no duplicates found I can access my device(HandSpring Visor) attached to this port under Windows. Mark Jacobs To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message