Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 28 Jan 2004 18:36:42 +0100 (CET)
From:      Lukas Ertl <l.ertl@univie.ac.at>
To:        wpaul@freebsd.org
Cc:        current@freebsd.org
Subject:   if_ndis + Centrino regression
Message-ID:  <20040128183210.E1057@korben.in.tern>

next in thread | raw e-mail | index | archive | help
Hi Bill,

there's some regression with if_ndis between a kernel from Jan 26 13:45
CET and a kernel from Jan 28 15:38 CET.

The if_ndis module from Jan 26 worked fine, but with the one from today
the card doesn't associate with my AP anymore:

ndis0: <Intel(R) PRO/Wireless LAN 2100 3B Mini PCI Adapter> mem
0xc0200000-0xc0200fff irq 6 at device 2.0 on pci2
can't re-use a leaf (ESS_ID)!
ndis0: NDIS API version: 5.1
ndis0: 802.11 address: 00:04:23:7e:d9:98
ndis0: 11b rates: 11Mbps 2Mbps 1Mbps

Everything fine so far, and I can set all params as usually with ifconfig:

ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 10.0.0.5 netmask 0xffffff00 broadcast 10.0.0.255
        ether 00:04:23:7e:d9:98
        media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
        status: no carrier
        ssid ""
        channel 1 authmode OPEN powersavemode OFF powersavesleep 100
        wepmode MIXED weptxkey 1
        wepkey 1:104-bit

But, as you can see, I get no carrier.  I can see the AP with "wicontrol
ndis0 -l", though.

I didn't change anything in my setup.

regards,
le

-- 
Lukas Ertl                             eMail: l.ertl@univie.ac.at
UNIX Systemadministrator               Tel.:  (+43 1) 4277-14073
Vienna University Computer Center      Fax.:  (+43 1) 4277-9140
University of Vienna                   http://mailbox.univie.ac.at/~le/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040128183210.E1057>