Date: Fri, 16 Aug 2019 22:58:26 +0200 From: Emmanuel Vadot <manu@bidouilliste.com> To: Emmanuel Vadot <manu@bidouilliste.com> Cc: =?ISO-8859-1?Q?S=F8ren?= Schmidt <soren.schmidt@gmail.com>, freebsd-arm <freebsd-arm@freebsd.org>, Marcin Wojtas <mw@semihalf.com> Subject: Re: Espressobin anyone ? Message-ID: <20190816225826.ce31e8f968021944f64cb67c@bidouilliste.com> In-Reply-To: <20190816191230.508f07f27fac21479a6716d9@bidouilliste.com> References: <E73AFF5D-43CA-41A7-BDBA-ADEF2D342479@deepcore.dk> <45CD194B-8533-42B7-9FE8-B2C8C03F4422@gmail.com> <1021311926.304550.1565731831094.JavaMail.zimbra@perftech.com> <4AE7C7A2-0BFB-4093-AE19-6AAC8F44FF25@gmail.com> <917479365.631712.1565792953255.JavaMail.zimbra@perftech.com> <CAPv3WKeCRWy65LPeeJiisPtaz=LePpVYLDAi2cj%2B2TQR=r09YA@mail.gmail.com> <1547777156.662147.1565798461515.JavaMail.zimbra@perftech.com> <0E42E605-477E-4E65-810E-BD3A8CDE2C80@gmail.com> <973015183.1067498.1565890674099.JavaMail.zimbra@perftech.com> <BD3710D7-EB87-4BD0-9CDE-E55B9412ED87@gmail.com> <20190815210311.1035f64b003e2bc85fa47ca8@bidouilliste.com> <B3AFA483-4BE4-4BC6-BCC1-4BD58A8E554C@gmail.com> <20190815233755.893e485f40ccacd79cdb3d96@bidouilliste.com> <78F5029D-A0F5-42F2-8191-07EB3A68C87B@gmail.com> <20190816152454.4e54ab5c276a543c120d909a@bidouilliste.com> <20190816171037.f808fbaba2369f179de36397@bidouilliste.com> <20190816191230.508f07f27fac21479a6716d9@bidouilliste.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 16 Aug 2019 19:12:30 +0200
Emmanuel Vadot <manu@bidouilliste.com> wrote:
> On Fri, 16 Aug 2019 17:10:37 +0200
> Emmanuel Vadot <manu@bidouilliste.com> wrote:
>=20
> > On Fri, 16 Aug 2019 15:24:54 +0200
> > Emmanuel Vadot <manu@bidouilliste.com> wrote:
> >=20
> > > On Fri, 16 Aug 2019 07:28:59 +0200
> > > S=F8ren Schmidt <soren.schmidt@gmail.com> wrote:
> > >=20
> > > > Hi
> > > >=20
> > > > Very simple, reverting sys/gnu/dts to what was before 350595 (actua=
lly 350592).
> > > > Thats what we have svn for ?
> > >=20
> > > If I asked how it was to have the svn command that you used, I want =
to
> > > make sure that you didn't revert anything else, like do you have
> > > r350596 and r350628 ?
> > >=20
> > > > That does make my bananapi work again, no other changes just a reco=
mpiled kernel.
> > >=20
> > > That + copying the dtb to the fat32 partition ?
> > >=20
> > > Can you post the dtb somewhere.
> > >=20
> > > > However it does not bring the Espressobin back to life, thats somet=
hing in one of the ~30 other files that changed between those two revisions.
> > >=20
> > > What Linux version of DTS are you using then ? The ones that were in
> > > stable/12 when it was branched (4.18) or a later revision ?
> >=20
> > So I think that I've found the problem on the Espressobin.
> > I think that the problem comes from the simple-mfd driver that I've
> > mfc in r350600.
> > The pinctrl/gpio controller compatible is
> > "marvell,armada3710-nb-pinctrl", "syscon", "simple-mfd" and it attaches
> > at BUS_PASS_INTERRUPT while the simple_mfd driver attaches at
> > BUS_PASS_BUS (so earlier) which means that no gpio controller will be
> > available for sdhci to detect the card.
> >=20
> > If someone with a non-working espressobin could post a full verbose
> > boot log that would help me confirming that this is the case.
> > I'll try to find a solution on how to solve this problem.
>=20
> So this wasn't the problem but I've found it, see r351129 and r351130
>=20
> SD card now work again in HEAD, I'll have a look at stable later next
> week.
I've did a quick test and I've MFC r348880, r348882 and r349596, the
two other commits needed to be mfc'ed are the one I did today on head,
I'll do that next week.
With them sdcard is working again on stable/12
> > > > -S=F8ren
> > > >=20
> > > > > On 15 Aug 2019, at 23.37, Emmanuel Vadot <manu@bidouilliste.com> =
wrote:
> > > > >=20
> > > > > On Thu, 15 Aug 2019 21:56:23 +0200
> > > > > S=F8ren Schmidt <soren.schmidt@gmail.com> wrote:
> > > > >=20
> > > > >>=20
> > > > >> Well, I don?t care where you are from and what color you have :)
> > > > >>=20
> > > > >> Now, if I update my stable12 sources to r350595 the bananapi bre=
aks, if revert sys/gnu/dts it works again, go figure..
> > > > >=20
> > > > > Reverting to what ? and how ?
> > > > >=20
> > > > > Because I've just test 12-stable and I have the problem that I've=
said
> > > > > in my previous mail so setting hw.regulator.disable_unused=3D0 is=
the
> > > > > work around.
> > > > > The problem is in twsi not in the DTS so I'm curious how reverting
> > > > > only the dts fixes this problem.
> > > > >=20
> > > > >> The r351099 fix is already like that in -stable, and not part of=
the problem.
> > > > >>=20
> > > > >> -S=F8ren
> > > > >=20
> > > > >>> On 15 Aug 2019, at 21.03, Emmanuel Vadot <manu@bidouilliste.com=
> wrote:
> > > > >>>=20
> > > > >>> On Thu, 15 Aug 2019 19:48:54 +0200
> > > > >>> S=F8ren Schmidt <soren.schmidt@gmail.com> wrote:
> > > > >>>=20
> > > > >>>> Hi Mit!
> > > > >>>>=20
> > > > >>>> Right, I suspected that, 12-stable broke many embedded systems=
between r350592 and r350595 where all the latest and greatest DTS files wa=
s pulled in, I guess the same holds for -current.
> > > > >>>>=20
> > > > >>>> -S=F8ren
> > > > >>>=20
> > > > >>> Mhm it's fun that you think that DTS import is the source of al=
l your
> > > > >>> problems, I get it, it's easy to blame the French guy that bulk=
import
> > > > >>> the DTS, he surely don't know what he is doing.
> > > > >>> Anyway, two problems were raised in this thread :
> > > > >>>=20
> > > > >>> 1) BananaPi (A20) doesn't boot
> > > > >>> 2) Espressobin sd support is broken
> > > > >>>=20
> > > > >>> I've just looked at the BananaPi problem today, I've fixed a fi=
rst
> > > > >>> problem in r351099.
> > > > >>> The main problem is that when we disable the unused regulators =
we hang
> > > > >>> when trying to disabling ldo3. It's weird because the board doe=
sn't use
> > > > >>> LDO3 (which is why we are disabling it, it's unused). The probl=
em is in
> > > > >>> twsi I think as only leaving the part in axp209 that read the
> > > > >>> voltage register value make FreeBSD hang.
> > > > >>> I'll have a proper look later, in the meantime you can set
> > > > >>> hw.regulator.disable_unused=3D0
> > > > >>> in /boot/loader.conf
> > > > >>> This isn't a DTS problem.
> > > > >>>=20
> > > > >>> For Espressobin I haven't found any thing related to SD in the =
DTS
> > > > >>> updates since the import, the only things slighly related are m=
mc and
> > > > >>> sdio.
> > > > >>> So if someone could find which DTS import broke this I can have=
a look.
> > > > >>>=20
> > > > >>>>=20
> > > > >>>>> On 15 Aug 2019, at 19.37, Mit Matelske <mit@pt.net> wrote:
> > > > >>>>>=20
> > > > >>>>> Yeah, that was the problem. I went back to r348882 and every=
thing worked out of the box.
> > > > >>>>>=20
> > > > >>>>> Thanks again for the hand holding!
> > > > >>>>>=20
> > > > >>>>> Mit
> > > > >>>>>=20
> > > > >>>>> From: "S=F8ren Schmidt" <soren.schmidt@gmail.com <mailto:sore=
n.schmidt@gmail.com>>
> > > > >>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>
> > > > >>>>> Cc: "Marcin Wojtas" <mw@semihalf.com <mailto:mw@semihalf.com>=
>, "freebsd-arm" <freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>>
> > > > >>>>> Sent: Wednesday, August 14, 2019 1:33:04 PM
> > > > >>>>> Subject: Re: Espressobin anyone ?
> > > > >>>>>=20
> > > > >>>>>=20
> > > > >>>>> It might simply be broken in -current (again).
> > > > >>>>>=20
> > > > >>>>> I just updated my stable12 tree and I pulled in new .dts file=
s for just about anything?
> > > > >>>>>=20
> > > > >>>>> Needless to say, it broke the Espressobin?s SD support, it no=
w fails just like yours..
> > > > >>>>>=20
> > > > >>>>> It also broke allwinner builds and what not, so I?m just goin=
g back in time again :)
> > > > >>>>>=20
> > > > >>>>> I wonder why there is this overwhelming need to import stuff =
that breaks things right, left and center in a -stable branch ?
> > > > >>>>> That would have earned you the pointy hat back when?.
> > > > >>>>>=20
> > > > >>>>> -S=F8ren
> > > > >>>>>=20
> > > > >>>>>=20
> > > > >>>>> On 14 Aug 2019, at 18.01, Mit Matelske <mit@pt.net <mailto:mi=
t@pt.net>> wrote:
> > > > >>>>>=20
> > > > >>>>> Marcin-
> > > > >>>>>=20
> > > > >>>>> Sorry I didn't reply yesterday. I didn't have any luck with =
that either. I tried a lot of permutations.
> > > > >>>>>=20
> > > > >>>>> Not saying for 100% it doesn't work, but I couldn't get it to=
work!
> > > > >>>>>=20
> > > > >>>>> Mit
> > > > >>>>>=20
> > > > >>>>> From: "Marcin Wojtas" <mw@semihalf.com <mailto:mw@semihalf.co=
m>>
> > > > >>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>
> > > > >>>>> Cc: "S=F8ren Schmidt" <soren.schmidt@gmail.com <mailto:soren.=
schmidt@gmail.com>>, "freebsd-arm" <freebsd-arm@freebsd.org <mailto:freebsd=
-arm@freebsd.org>>
> > > > >>>>> Sent: Wednesday, August 14, 2019 10:41:04 AM
> > > > >>>>> Subject: Re: Espressobin anyone ?
> > > > >>>>>=20
> > > > >>>>> Hi Mit,
> > > > >>>>> Since you are using the latest 13-current, could you please t=
ry if passing rootdev via u-boot bootargs (please see my previous email) wo=
rks for you without the loader modification?
> > > > >>>>>=20
> > > > >>>>> Best regards,
> > > > >>>>> Marcin
> > > > >>>>>=20
> > > > >>>>> ?r., 14 sie 2019 o 16:29 Mit Matelske <mit@pt.net <mailto:mit=
@pt.net>> napisa?(a):
> > > > >>>>> Soren-
> > > > >>>>>=20
> > > > >>>>> Thanks for the info. I'll grab a couple more SD cards at lun=
ch. This one is a new Samsung 32GB. I'll also try putting the changes int=
o 12 and see if that helps. I'm using the latest 13-current.
> > > > >>>>>=20
> > > > >>>>> Again, appreciate the hand holding!
> > > > >>>>>=20
> > > > >>>>> Mit
> > > > >>>>>=20
> > > > >>>>> From: "S=F8ren Schmidt" <soren.schmidt@gmail.com <mailto:sore=
n.schmidt@gmail.com>>
> > > > >>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>
> > > > >>>>> Cc: "Marcin Wojtas" <mw@semihalf.com <mailto:mw@semihalf.com>=
>, "freebsd-arm" <freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>>
> > > > >>>>> Sent: Wednesday, August 14, 2019 2:30:31 AM
> > > > >>>>> Subject: Re: Espressobin anyone ?
> > > > >>>>>=20
> > > > >>>>> Hi Mit
> > > > >>>>> Hmm, from your earlier posted dmesgs it looks like the SD car=
d is not getting detected properly..
> > > > >>>>>=20
> > > > >>>>> I get this output:
> > > > >>>>>=20
> > > > >>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd=
02ff,0x1e808-0x1e80b irq 24 on simplebus1
> > > > >>>>> mmc0: <MMC/SD bus> on sdhci_xenon0
> > > > >>>>> ?snip?
> > > > >>>>> mmcsd0: 16GB <SDHC SD16G 3.0 SN 01E28E67 MFG 07/2017 by 39 PH=
> at mmc0 50.0MHz/4bit/65535-block
> > > > >>>>>=20
> > > > >>>>> The problem you see was fixed for me by r348882, maybe it got=
broken later, I havn?t backported the later changes..
> > > > >>>>>=20
> > > > >>>>> Have you tried another SD card ? I have found 2 of mine that =
the espressobin doesn?t like, but works fine with bananapi and friends...
> > > > >>>>>=20
> > > > >>>>> -S=F8ren
> > > > >>>>>=20
> > > > >>>>> On 13 Aug 2019, at 23.30, Mit Matelske <mit@pt.net <mailto:mi=
t@pt.net>> wrote:
> > > > >>>>>=20
> > > > >>>>> Soren-
> > > > >>>>>=20
> > > > >>>>> Thanks for the code snippet! That will fix one of the proble=
ms.
> > > > >>>>>=20
> > > > >>>>> I still can't mount my filesystem, though. I think I'm doing=
something really simple, wrong. I believe I'm running the latest code and=
added some printfs to show the kernel setting the regulator:
> > > > >>>>>=20
> > > > >>>>>=20
> > > > >>>>> usbus1 on ehci0
> > > > >>>>> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
> > > > >>>>> sdhci_xenon0: regulator_get_by_ofw_property(vqmmc-supply) =3D=
19
> > > > >>>>> sdhci_xenon0: vqmmc-supply regulator found
> > > > >>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd=
02ff,0x1e808-0x1e80b irq 24 on simplebus1
> > > > >>>>> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on s=
implebus1
> > > > >>>>>=20
> > > > >>>>>=20
> > > > >>>>> Could there be a problem with how I am setting up my filesyst=
em? I've tried both freebsd-ufs and freebsd as the type, with no luck. A g=
part listing of my SD card:
> > > > >>>>>=20
> > > > >>>>> root@fbl:~ # gpart list da3
> > > > >>>>> Geom name: da3
> > > > >>>>> modified: false
> > > > >>>>> state: OK
> > > > >>>>> fwheads: 255
> > > > >>>>> fwsectors: 63
> > > > >>>>> last: 62521335
> > > > >>>>> first: 3
> > > > >>>>> entries: 4
> > > > >>>>> scheme: GPT
> > > > >>>>> Providers:
> > > > >>>>> 1. Name: da3p1
> > > > >>>>> Mediasize: 41943040 (40M)
> > > > >>>>> Sectorsize: 512
> > > > >>>>> Stripesize: 0
> > > > >>>>> Stripeoffset: 1536
> > > > >>>>> Mode: r0w0e0
> > > > >>>>> efimedia: HD(1,GPT,19894dc5-b8b2-11e9-871f-08008a0010e0,0x3,=
0x14000)
> > > > >>>>> rawuuid: 19894dc5-b8b2-11e9-871f-08008a0010e0
> > > > >>>>> rawtype: c12a7328-f81f-11d2-ba4b-00a0c93ec93b
> > > > >>>>> label: (null)
> > > > >>>>> length: 41943040
> > > > >>>>> offset: 1536
> > > > >>>>> type: efi
> > > > >>>>> index: 1
> > > > >>>>> end: 81922
> > > > >>>>> start: 3
> > > > >>>>> 2. Name: da3p2
> > > > >>>>> Mediasize: 31968979456 (30G)
> > > > >>>>> Sectorsize: 512
> > > > >>>>> Stripesize: 0
> > > > >>>>> Stripeoffset: 41944576
> > > > >>>>> Mode: r0w0e0
> > > > >>>>> efimedia: HD(2,GPT,98786462-be30-11e9-ae6e-08008a0010e0,0x14=
003,0x3b8bff5)
> > > > >>>>> rawuuid: 98786462-be30-11e9-ae6e-08008a0010e0
> > > > >>>>> rawtype: 516e7cb6-6ecf-11d6-8ff8-00022d09712b
> > > > >>>>> label: (null)
> > > > >>>>> length: 31968979456
> > > > >>>>> offset: 41944576
> > > > >>>>> type: freebsd-ufs
> > > > >>>>> index: 2
> > > > >>>>> end: 62521335
> > > > >>>>> start: 81923
> > > > >>>>> Consumers:
> > > > >>>>> 1. Name: da3
> > > > >>>>> Mediasize: 32010928128 (30G)
> > > > >>>>> Sectorsize: 512
> > > > >>>>> Mode: r0w0e0
> > > > >>>>>=20
> > > > >>>>> Thanks!!
> > > > >>>>>=20
> > > > >>>>> Mit
> > > > >>>>>=20
> > > > >>>>> From: "S=F8ren Schmidt" <soren.schmidt@gmail.com <mailto:sore=
n.schmidt@gmail.com>>
> > > > >>>>> To: "Marcin Wojtas" <mw@semihalf.com <mailto:mw@semihalf.com>>
> > > > >>>>> Cc: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>, "freebsd=
-arm" <freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>>
> > > > >>>>> Sent: Tuesday, August 13, 2019 12:55:09 PM
> > > > >>>>> Subject: Re: Espressobin anyone ?
> > > > >>>>>=20
> > > > >>>>> Hi
> > > > >>>>> That doesn?t seen to work on the espressobin, or least I can?=
t get it to pick it up.
> > > > >>>>>=20
> > > > >>>>> I use this patch as a workaround:
> > > > >>>>>=20
> > > > >>>>> Index: main.c
> > > > >>>>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> > > > >>>>> --- main.c (revision 350496)
> > > > >>>>> +++ main.c (working copy)
> > > > >>>>> @@ -463,6 +462,13 @@
> > > > >>>>> int rv;
> > > > >>>>> char *rootdev;
> > > > >>>>>=20
> > > > >>>>> +#if defined(__aarch64__)
> > > > >>>>> + /* SOS HACK in rootdev, at least Espressobin gets this w=
rong */
> > > > >>>>> + printf("Setting currdev hack\n");
> > > > >>>>> + set_currdev("disk0p2");
> > > > >>>>> + return (0);
> > > > >>>>> +#endif
> > > > >>>>> +
> > > > >>>>> /*
> > > > >>>>> * First choice: if rootdev is already set, use that, even=
if
> > > > >>>>> * it's wrong.
> > > > >>>>>=20
> > > > >>>>> Its not pretty but it does the job until I get time to look i=
nto why bootargs aren?t passed / won?t stick, probably something I havn?t b=
ackported to my -stable12 sources yet...
> > > > >>>>>=20
> > > > >>>>> -S=F8ren
> > > > >>>>>=20
> > > > >>>>> On 13 Aug 2019, at 01.38, Marcin Wojtas <mw@semihalf.com <mai=
lto:mw@semihalf.com>> wrote:
> > > > >>>>>=20
> > > > >>>>> Hi,
> > > > >>>>>=20
> > > > >>>>> Not sure if it's what you are looking for, but in order to au=
toboot, I
> > > > >>>>> simply pass 'rootdev=3DdiskXpY' in the bootargs variable. Her=
e's example from
> > > > >>>>> A3720-DB (same should work on EspressoBin):
> > > > >>>>>=20
> > > > >>>>> Marvell>> set bootargs "rootdev=3Ddisk1p1";usb reset; fatload=
usb 0:1
> > > > >>>>> ${fdt_addr} armada-3720-db.dtb; fatload usb 0:1 ${kernel_addr}
> > > > >>>>> boot/loader.efi; bootefi ${kernel_addr} ${fdt_addr}
> > > > >>>>> resetting USB...
> > > > >>>>> USB0: Register 2000104 NbrPorts 2
> > > > >>>>> Starting the controller
> > > > >>>>> USB XHCI 1.00
> > > > >>>>> USB1: USB EHCI 1.00
> > > > >>>>> - ______ ____ _____ _____
> > > > >>>>> | ____| | _ \ / ____| __ \
> > > > >>>>> | |___ _ __ ___ ___ | |_) | (___ | | | |
> > > > >>>>> | ___| '__/ _ \/ _ \| _ < \___ \| | | |
> > > > >>>>> | | | | | __/ __/| |_) |____) | |__| |
> > > > >>>>> | | | | | | || | | |
> > > > >>>>> |_| |_| \___|\___||____/|_____/|_____/
> > > > >>>>> ```
> > > > >>>>> `
> > > > >>>>> ????????????Welcome to FreeBSD????????????? s` `.....---..=
.....--.```
> > > > >>>>> -/
> > > > >>>>> ? ? +o .--` =
/y:`
> > > > >>>>> +.
> > > > >>>>> ? 1. Boot Multi user [Enter] ? yo`:. =
:o
> > > > >>>>> `+-
> > > > >>>>> ? 2. Boot Single user ? y/ =
-/` -o/
> > > > >>>>> ? 3. Escape to loader prompt ? .-
> > > > >>>>> ::/sy+:.
> > > > >>>>> ? 4. Reboot ? / =
`--
> > > > >>>>> /
> > > > >>>>> ? ? `:
> > > > >>>>> :`
> > > > >>>>> ? Options: ? `:
> > > > >>>>> :`
> > > > >>>>> ? 5. Kernel: default/kernel (1 of 1) ? /
> > > > >>>>> /
> > > > >>>>> ? 6. Boot Options ? .-
> > > > >>>>> -.
> > > > >>>>> ? ? -- =
-.
> > > > >>>>> ? ? `:` =
`:`
> > > > >>>>> ? ? .-- =
`--.
> > > > >>>>> ??????????????????????????????????????????? .---..=
...----.
> > > > >>>>> Autoboot in 9 seconds, hit [Enter] to boot or any other key t=
o stop
> > > > >>>>>=20
> > > > >>>>> Loading kernel...
> > > > >>>>> /boot/kernel/kernel text=3D0x95047c data=3D0x1919d0+0x84aa94
> > > > >>>>> syms=3D[0x8+0x13aaa8+0x8+0x12610d]
> > > > >>>>> Loading configured modules...
> > > > >>>>> can't find '/boot/entropy'
> > > > >>>>> Using DTB provided by EFI at 0x8000000.
> > > > >>>>> ---<<BOOT>>---
> > > > >>>>> KDB: debugger backends: ddb
> > > > >>>>> KDB: current backend: ddb
> > > > >>>>> Copyright (c) 1992-2019 The FreeBSD Project.
> > > > >>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,=
1993, 1994
> > > > >>>>> The Regents of the University of California. All rights reser=
ved.
> > > > >>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
> > > > >>>>> FreeBSD 13.0-CURRENT 17a1fc80d57-c261519(upstream_master) GEN=
ERIC arm64
> > > > >>>>> FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (=
based on LLVM
> > > > >>>>> 8.0.0)
> > > > >>>>> WARNING: WITNESS option enabled, expect reduced performance.
> > > > >>>>> VT: init without driver.
> > > > >>>>> Starting CPU 1 (1)
> > > > >>>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> > > > >>>>> [...]
> > > > >>>>>=20
> > > > >>>>> Best regards,
> > > > >>>>> Marcin
> > > > >>>>>=20
> > > > >>>>> pon., 12 sie 2019 o 23:14 Mit Matelske <mit@pt.net <mailto:mi=
t@pt.net>> napisa?(a):
> > > > >>>>>=20
> > > > >>>>>=20
> > > > >>>>> Soren-
> > > > >>>>>=20
> > > > >>>>> Thanks for the quick response. I built this kernel with revi=
sion 350924.
> > > > >>>>> I'll dig into whats going on in the morning.
> > > > >>>>>=20
> > > > >>>>> Mind posting your diff for your loader.efi?
> > > > >>>>>=20
> > > > >>>>> Thanks again!
> > > > >>>>>=20
> > > > >>>>> Mit
> > > > >>>>>=20
> > > > >>>>>=20
> > > > >>>>> ----- Original Message -----
> > > > >>>>> From: "S=F8ren Schmidt" <soren.schmidt@gmail.com <mailto:sore=
n.schmidt@gmail.com>>
> > > > >>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>
> > > > >>>>> Cc: "tscho" <johannes@t-beutel.com <mailto:johannes@t-beutel.=
com>>, "freebsd-arm" <
> > > > >>>>> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>>
> > > > >>>>> Sent: Monday, August 12, 2019 3:49:48 PM
> > > > >>>>> Subject: Re: Espressobin anyone ?
> > > > >>>>>=20
> > > > >>>>> Hi
> > > > >>>>>=20
> > > > >>>>> Looks like your sources may be too old, you need to be at lea=
st at r348882
> > > > >>>>> to get the fix for the SD card VCC regulator.
> > > > >>>>>=20
> > > > >>>>> That change fixed it for me backported to 12-stable...
> > > > >>>>>=20
> > > > >>>>> The currdev problem still exists, I have it hardwired in my l=
oader for
> > > > >>>>> aarch64 :)
> > > > >>>>>=20
> > > > >>>>> -S=F8ren
> > > > >>>>>=20
> > > > >>>>>=20
> > > > >>>>> On 12 Aug 2019, at 21.06, Mit Matelske <mit@pt.net <mailto:mi=
t@pt.net>> wrote:
> > > > >>>>>=20
> > > > >>>>> I'm having a couple little hiccups booting this board also. =
One has
> > > > >>>>> been commented on already, that I can't get the loader to aut=
omatically
> > > > >>>>> start loading the kernel on "disk0p2"...
> > > > >>>>>=20
> > > > >>>>> The second, is that the kernel can't find the SD card after b=
ooting so
> > > > >>>>> it can't mount the root filesystem. I'm using the dts/dtb an=
d kernel from
> > > > >>>>> the 13-current branch.
> > > > >>>>>=20
> > > > >>>>> Thanks for any and all help. I haven't used u-boot in about =
decade.
> > > > >>>>> Spoiled by the x86 platform.
> > > > >>>>>=20
> > > > >>>>> Mit Matelske
> > > > >>>>>=20
> > > > >>>>>=20
> > > > >>>>> ***U-boot environment:***
> > > > >>>>>=20
> > > > >>>>>=20
> > > > >>>>> Marvell>> printenv
> > > > >>>>> baudrate=3D115200
> > > > >>>>> bootargs=3Dconsole=3DttyMV0,115200 earlycon=3Dar3700_uart,0xd=
0012000
> > > > >>>>> root=3D/dev/mmcblk0p1 rw rootwait net.ifnames=3D0 biosdevname=
=3D0
> > > > >>>>> bootcmd=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr $image_name=
;fatload mmc
> > > > >>>>> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
> > > > >>>>> bootdelay=3D2
> > > > >>>>> bootmmc=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr $image_name=
;fatload mmc
> > > > >>>>> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
> > > > >>>>> console=3Dconsole=3DttyMV0,115200 earlycon=3Dar3700_uart,0xd0=
012000
> > > > >>>>> eth1addr=3D00:51:82:11:22:01
> > > > >>>>> eth2addr=3D00:51:82:11:22:02
> > > > >>>>> eth3addr=3D00:51:82:11:22:03
> > > > >>>>> ethact=3Dneta@30000
> > > > >>>>> ethaddr=3DF0:AD:4E:09:6B:8F
> > > > >>>>> ethprime=3Deth0
> > > > >>>>> fdt_addr=3D0x4f00000
> > > > >>>>> fdt_high=3D0xffffffffffffffff
> > > > >>>>> fdt_name=3Defi/boot/armada-3720-espressobin.dtb
> > > > >>>>> fdtcontroladdr=3D3f7161b8
> > > > >>>>> gatewayip=3D10.4.50.254
> > > > >>>>> get_images=3Dtftpboot $kernel_addr $image_name; tftpboot $fdt=
_addr
> > > > >>>>> $fdt_name; run get_ramfs
> > > > >>>>> get_ramfs=3Dif test "${ramfs_name}" !=3D "-"; then setenv ram=
fs_addr
> > > > >>>>> 0x8000000; tftpboot $ramfs_addr $ramfs_name; else setenv ramf=
s_addr -;fi
> > > > >>>>> hostname=3Dmarvell
> > > > >>>>> image_name=3Defi/freebsd/loader.efi
> > > > >>>>> initrd_addr=3D0xa00000
> > > > >>>>> initrd_size=3D0x2000000
> > > > >>>>> ipaddr=3D0.0.0.0
> > > > >>>>> kernel_addr=3D0x5000000
> > > > >>>>> loadaddr=3D0x5000000
> > > > >>>>> netdev=3Deth0
> > > > >>>>> netmask=3D255.255.255.0
> > > > >>>>> ramfs_addr=3D0x8000000
> > > > >>>>> ramfs_name=3D-
> > > > >>>>> root=3Droot=3D/dev/nfs rw
> > > > >>>>> rootpath=3D/srv/nfs/
> > > > >>>>> serverip=3D0.0.0.0
> > > > >>>>> set_bootargs=3Dsetenv bootargs $console $root
> > > > >>>>> ip=3D$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:=
none
> > > > >>>>> nfsroot=3D$serverip:$rootpath $extra_params
> > > > >>>>> stderr=3Dserial@12000
> > > > >>>>> stdin=3Dserial@12000
> > > > >>>>> stdout=3Dserial@12000
> > > > >>>>>=20
> > > > >>>>>=20
> > > > >>>>> ***Full boot logs:***
> > > > >>>>>=20
> > > > >>>>>=20
> > > > >>>>> U-Boot 2017.03-armada-17.10.2-g14aeedc (Jun 01 2018 - 15:39:1=
0 +0800)
> > > > >>>>>=20
> > > > >>>>> Model: Marvell Armada 3720 Community Board ESPRESSOBin
> > > > >>>>> CPU @ 1000 [MHz]
> > > > >>>>> L2 @ 800 [MHz]
> > > > >>>>> TClock @ 200 [MHz]
> > > > >>>>> DDR @ 800 [MHz]
> > > > >>>>> DRAM: 1 GiB
> > > > >>>>> U-Boot DT blob at : 000000003f7161b8
> > > > >>>>> Comphy-0: USB3 5 Gbps
> > > > >>>>> Comphy-1: PEX0 2.5 Gbps
> > > > >>>>> Comphy-2: SATA0 6 Gbps
> > > > >>>>> SATA link 0 timeout.
> > > > >>>>> AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
> > > > >>>>> flags: ncq led only pmp fbss pio slum part sxs
> > > > >>>>> PCIE-0: Link down
> > > > >>>>> MMC: sdhci@d0000: 0, sdhci@d8000: 1
> > > > >>>>> SF: Detected mx25u3235f with page size 256 Bytes, erase size =
64 KiB,
> > > > >>>>> total 4 MiB
> > > > >>>>> Net: eth0: neta@30000 [PRIME]
> > > > >>>>> Hit any key to stop autoboot: 0
> > > > >>>>> switch to partitions #0, OK
> > > > >>>>> mmc0 is current device
> > > > >>>>> reading efi/freebsd/loader.efi
> > > > >>>>> 603872 bytes read in 49 ms (11.8 MiB/s)
> > > > >>>>> reading efi/boot/armada-3720-espressobin.dtb
> > > > >>>>> 15946 bytes read in 17 ms (916 KiB/s)
> > > > >>>>> ## Starting EFI application at 05000000 ...
> > > > >>>>> Scanning disk sdhci@d0000.blk <mailto:sdhci@d0000.blk>...
> > > > >>>>> Card did not respond to voltage select!
> > > > >>>>> mmc_init: -95, time 50
> > > > >>>>> Found 1 disks
> > > > >>>>> Consoles: EFI console
> > > > >>>>> FreeBSD/arm64 EFI loader, Revision 1.1
> > > > >>>>>=20
> > > > >>>>> Command line arguments: loader.efi
> > > > >>>>> EFI version: 2.05
> > > > >>>>> EFI Firmware: Das U-boot (rev 0.00)
> > > > >>>>> Console: efi (0)
> > > > >>>>> Failed to find bootable partition
> > > > >>>>> Startup error in /boot/lua/loader.lua: seconds
> > > > >>>>> LUA ERROR: cannot open /boot/lua/loader.lua: invalid argument.
> > > > >>>>>=20
> > > > >>>>> can't load 'kernel'
> > > > >>>>>=20
> > > > >>>>> Type '?' for a list of commands, 'help' for more detailed hel=
p.
> > > > >>>>> OK
> > > > >>>>> OK set currdev=3Ddisk0p2
> > > > >>>>> OK boot
> > > > >>>>>=20
> > > > >>>>> /boot/kernel/kernel text=3D0x97d6a0 data=3D0x191b50+0x84ae94
> > > > >>>>> syms=3D[0x8+0x137dd8+0x8+0x126260]
> > > > >>>>> Using DTB provided by EFI at 0x8000000.
> > > > >>>>> ---<<BOOT>>---
> > > > >>>>> KDB: debugger backends: ddb
> > > > >>>>> KDB: current backend: ddb
> > > > >>>>> Copyright (c) 1992-2019 The FreeBSD Project.
> > > > >>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,=
1993, 1994
> > > > >>>>> The Regents of the University of California. All rights r=
eserved.
> > > > >>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
> > > > >>>>> FreeBSD 13.0-CURRENT GENERIC arm64
> > > > >>>>> FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (=
based on
> > > > >>>>> LLVM 6.0.1)
> > > > >>>>> WARNING: WITNESS option enabled, expect reduced performance.
> > > > >>>>> VT: init without driver.
> > > > >>>>> Starting CPU 1 (1)
> > > > >>>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> > > > >>>>> arc4random: WARNING: initial seeding bypassed the cryptograph=
ic random
> > > > >>>>> device because it was not yet seeded and the knob 'bypass_bef=
ore_seeding'
> > > > >>>>> was enabled.
> > > > >>>>> random: entropy device external interface
> > > > >>>>> MAP 3e681000 mode 2 pages 1
> > > > >>>>> MAP 3ffa6000 mode 2 pages 1
> > > > >>>>> kbd0 at kbdmux0
> > > > >>>>> ofwbus0: <Open Firmware Device Tree>
> > > > >>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0
> > > > >>>>> simplebus1: <Flattened device tree simple bus> on simplebus0
> > > > >>>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem
> > > > >>>>> 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1
> > > > >>>>> simple_mfd1: <Simple MFD (Multi-Functions Device)> mem
> > > > >>>>> 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1
> > > > >>>>> psci0: <ARM Power State Co-ordination Interface Driver> on of=
wbus0
> > > > >>>>> gic0: <ARM Generic Interrupt Controller v3.0> mem
> > > > >>>>> 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0=
x1d90000-0x1d91fff,0x1da0000-0x1dbffff
> > > > >>>>> irq 27 on simplebus1
> > > > >>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> > > > >>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,3=
6,37,38,39 on
> > > > >>>>> simple_mfd0
> > > > >>>>> gpio0: cannot allocate memory window
> > > > >>>>> device_attach: gpio0 attach returned 6
> > > > >>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> > > > >>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_=
mfd1
> > > > >>>>> gpio0: cannot allocate memory window
> > > > >>>>> device_attach: gpio0 attach returned 6
> > > > >>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> > > > >>>>> gpioregulator0: cannot get pin 0
> > > > >>>>> gpioregulator0: cannot parse parameters
> > > > >>>>> device_attach: gpioregulator0 attach returned 6
> > > > >>>>> generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
> > > > >>>>> Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz qu=
ality 1000
> > > > >>>>> Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz qua=
lity 1000
> > > > >>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> > > > >>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,3=
6,37,38,39 on
> > > > >>>>> simple_mfd0
> > > > >>>>> gpio0: cannot allocate memory window
> > > > >>>>> device_attach: gpio0 attach returned 6
> > > > >>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> > > > >>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_=
mfd1
> > > > >>>>> gpio0: cannot allocate memory window
> > > > >>>>> device_attach: gpio0 attach returned 6
> > > > >>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> > > > >>>>> gpioregulator0: cannot get pin 0
> > > > >>>>> gpioregulator0: cannot parse parameters
> > > > >>>>> device_attach: gpioregulator0 attach returned 6
> > > > >>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> > > > >>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,3=
6,37,38,39 on
> > > > >>>>> simple_mfd0
> > > > >>>>> gpio0: cannot allocate memory window
> > > > >>>>> device_attach: gpio0 attach returned 6
> > > > >>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> > > > >>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_=
mfd1
> > > > >>>>> gpio0: cannot allocate memory window
> > > > >>>>> device_attach: gpio0 attach returned 6
> > > > >>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> > > > >>>>> gpioregulator0: cannot get pin 0
> > > > >>>>> gpioregulator0: cannot parse parameters
> > > > >>>>> device_attach: gpioregulator0 attach returned 6
> > > > >>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> > > > >>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,3=
6,37,38,39 on
> > > > >>>>> simple_mfd0
> > > > >>>>> gpio0: cannot allocate memory window
> > > > >>>>> device_attach: gpio0 attach returned 6
> > > > >>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> > > > >>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_=
mfd1
> > > > >>>>> gpio0: cannot allocate memory window
> > > > >>>>> device_attach: gpio0 attach returned 6
> > > > >>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> > > > >>>>> gpioregulator0: cannot get pin 0
> > > > >>>>> gpioregulator0: cannot parse parameters
> > > > >>>>> device_attach: gpioregulator0 attach returned 6
> > > > >>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> > > > >>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,3=
6,37,38,39 on
> > > > >>>>> simple_mfd0
> > > > >>>>> gpio0: cannot allocate memory window
> > > > >>>>> device_attach: gpio0 attach returned 6
> > > > >>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> > > > >>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_=
mfd1
> > > > >>>>> gpio0: cannot allocate memory window
> > > > >>>>> device_attach: gpio0 attach returned 6
> > > > >>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> > > > >>>>> gpioregulator0: cannot get pin 0
> > > > >>>>> gpioregulator0: cannot parse parameters
> > > > >>>>> device_attach: gpioregulator0 attach returned 6
> > > > >>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0
> > > > >>>>> cpu0: <Open Firmware CPU> on cpulist0
> > > > >>>>> cpu1: <Open Firmware CPU> on cpulist0
> > > > >>>>> pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0
> > > > >>>>> syscon_generic0: <syscon> mem 0xd000-0xdfff on simplebus1
> > > > >>>>> syscon_generic1: <syscon> mem 0x11500-0x1153f on simplebus1
> > > > >>>>> uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq 9,1=
0,11 on
> > > > >>>>> simplebus1
> > > > >>>>> uart0: console (115200,n,8,1)
> > > > >>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> > > > >>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,3=
6,37,38,39 on
> > > > >>>>> simple_mfd0
> > > > >>>>> gpio0: cannot allocate memory window
> > > > >>>>> device_attach: gpio0 attach returned 6
> > > > >>>>> syscon_generic2: <syscon> mem 0x14000-0x1405f on simplebus1
> > > > >>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> > > > >>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_=
mfd1
> > > > >>>>> gpio0: cannot allocate memory window
> > > > >>>>> device_attach: gpio0 attach returned 6
> > > > >>>>> mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simp=
lebus1
> > > > >>>>> mvneta0: version is 10
> > > > >>>>> mvneta0: Ethernet address: 00:a6:39:ca:e8:00
> > > > >>>>> mdio0: <MDIO> on mvneta0
> > > > >>>>> mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
> > > > >>>>> e6000sw0: <Marvell 88E6341> on mdio0
> > > > >>>>> e6000sw0: multi-chip addressing mode (0x1)
> > > > >>>>> e6000sw0: CPU port at 0
> > > > >>>>> e6000sw0: fixed port at 0
> > > > >>>>> e6000sw0: PHY at port 1
> > > > >>>>> miibus0: <MII bus> on e6000sw0
> > > > >>>>> e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0
> > > > >>>>> e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-=
FDX,
> > > > >>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-mas=
ter, auto
> > > > >>>>> e6000sw0: PHY at port 2
> > > > >>>>> miibus1: <MII bus> on e6000sw0
> > > > >>>>> e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1
> > > > >>>>> e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-=
FDX,
> > > > >>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-mas=
ter, auto
> > > > >>>>> e6000sw0: PHY at port 3
> > > > >>>>> miibus2: <MII bus> on e6000sw0
> > > > >>>>> e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2
> > > > >>>>> e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-=
FDX,
> > > > >>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-mas=
ter, auto
> > > > >>>>> e6000sw0: switch is ready.
> > > > >>>>> etherswitch0: <Switch controller> on e6000sw0
> > > > >>>>> xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 1=
6 on
> > > > >>>>> simplebus1
> > > > >>>>> xhci0: 32 bytes context size, 32-bit DMA
> > > > >>>>> usbus0 on xhci0
> > > > >>>>> syscon_generic3: <syscon> mem 0x5d800-0x5dfff on simplebus1
> > > > >>>>> ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x=
5efff irq
> > > > >>>>> 17 on simplebus1
> > > > >>>>> usbus1: EHCI version 1.0
> > > > >>>>> usbus1 on ehci0
> > > > >>>>> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
> > > > >>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem
> > > > >>>>> 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
> > > > >>>>> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on s=
implebus1
> > > > >>>>> ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier support=
ed with FBS
> > > > >>>>> ahcich0: <AHCI channel> at channel 0 on ahci0
> > > > >>>>> device_attach: ahcich0 attach returned 6
> > > > >>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> > > > >>>>> gpioregulator0: cannot get pin 0
> > > > >>>>> gpioregulator0: cannot parse parameters
> > > > >>>>> device_attach: gpioregulator0 attach returned 6
> > > > >>>>> cryptosoft0: <software crypto>
> > > > >>>>> Timecounters tick every 1.000 msec
> > > > >>>>> mvneta0: link state changed to UP
> > > > >>>>> e6000sw0port1: link state changed to DOWN
> > > > >>>>> e6000sw0port2: link state changed to DOWN
> > > > >>>>> e6000sw0port3: link state changed to DOWN
> > > > >>>>> usbus0: 5.0Gbps Super Speed USB v3.0
> > > > >>>>> usbus1: 480Mbps High Speed USB v2.0
> > > > >>>>> Release APs...done
> > > > >>>>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0
> > > > >>>>> Instruction Set Attributes 0 =3D <CRC32,SHA2,SHA1,AES+PMULL>
> > > > >>>>> Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,no=
atime]...
> > > > >>>>> Instruction Set Attributes 1 =3D <>
> > > > >>>>> Root mount waiting for: Processor Features 0 =3D
> > > > >>>>> <GIC,AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
> > > > >>>>> usbus1 Processor Features 1 =3D <0>
> > > > >>>>> usbus0 Memory Model Features 0 =3D <4k Granule,64k Granu=
le,S/NS
> > > > >>>>> Mem,MixedEndian,16bit ASID,1TB PA>
> > > > >>>>>=20
> > > > >>>>> Memory Model Features 1 =3D <>
> > > > >>>>> Memory Model Features 2 =3D <32b CCIDX,48b VA>
> > > > >>>>> Debug Features 0 =3D <2 CTX Breakpoints,4 Watchpoint=
s,6
> > > > >>>>> Breakpoints,PMUv3,Debug v8>
> > > > >>>>> Debug Features 1 =3D <0>
> > > > >>>>> Auxiliary Features 0 =3D <0>
> > > > >>>>> Auxiliary Features 1 =3D <0>
> > > > >>>>> CPU 1: ARM Cortex-A53 r0p4 affinity: 1
> > > > >>>>> WARNING: WITNESS option enabled, expect reduced performance.
> > > > >>>>> ugen0.1: <Generic XHCI root HUB> at usbus0
> > > > >>>>> ugen1.1: <Marvell EHCI root HUB> at usbus1
> > > > >>>>> uhub0 on usbus0
> > > > >>>>> uhub1 on usbus1
> > > > >>>>> uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr=
1> on
> > > > >>>>> usbus0
> > > > >>>>> uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr=
1> on
> > > > >>>>> usbus1
> > > > >>>>> uhub0: 2 ports with 2 removable, self powered
> > > > >>>>> uhub1: 1 port with 1 removable, self powered
> > > > >>>>> mountroot: waiting for device /dev/ufs/FreeBSD_Install...
> > > > >>>>> Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error =
19.
> > > > >>>>>=20
> > > > >>>>> Loader variables:
> > > > >>>>> vfs.root.mountfrom=3Dufs:/dev/ufs/FreeBSD_Install
> > > > >>>>> vfs.root.mountfrom.options=3Dro,noatime
> > > > >>>>>=20
> > > > >>>>> Manual root filesystem specification:
> > > > >>>>> <fstype>:<device> [options]
> > > > >>>>> Mount <device> using filesystem <fstype>
> > > > >>>>> and with the specified (optional) option list.
> > > > >>>>>=20
> > > > >>>>> eg. ufs:/dev/da0s1a
> > > > >>>>> zfs:zroot/ROOT/default
> > > > >>>>> cd9660:/dev/cd0 ro
> > > > >>>>> (which is equivalent to: mount -t cd9660 -o ro /dev/cd0=
/)
> > > > >>>>>=20
> > > > >>>>> ? List valid disk boot devices
> > > > >>>>> . Yield 1 second (for background tasks)
> > > > >>>>> <empty line> Abort manual input
> > > > >>>>>=20
> > > > >>>>> mountroot> ?
> > > > >>>>>=20
> > > > >>>>> List of GEOM managed disk devices:
> > > > >>>>>=20
> > > > >>>>>=20
> > > > >>>>> mountroot>
> > > > >>>>> _______________________________________________
> > > > >>>>> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org> mail=
ing list
> > > > >>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https=
://lists.freebsd.org/mailman/listinfo/freebsd-arm>
> > > > >>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@fre=
ebsd.org <mailto:freebsd-arm-unsubscribe@freebsd.org>"
> > > > >>>>>=20
> > > > >>>>> _______________________________________________
> > > > >>>>> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org> mail=
ing list
> > > > >>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https=
://lists.freebsd.org/mailman/listinfo/freebsd-arm>
> > > > >>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@fre=
ebsd.org <mailto:freebsd-arm-unsubscribe@freebsd.org>"
> > > > >>>>=20
> > > > >>>=20
> > > > >>>=20
> > > > >>> --
> > > > >>> Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
> > > > >>=20
> > > > >=20
> > > > >=20
> > > > > --=20
> > > > > Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
> > >=20
> > >=20
> > > --=20
> > > Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
> > > _______________________________________________
> > > freebsd-arm@freebsd.org mailing list
> > > https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> > > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
> >=20
> >=20
> > --=20
> > Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
> > _______________________________________________
> > freebsd-arm@freebsd.org mailing list
> > https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
>=20
>=20
> --=20
> Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
> _______________________________________________
> freebsd-arm@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
--=20
Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20190816225826.ce31e8f968021944f64cb67c>