Date: Mon, 15 Nov 2010 16:45:21 -0500 From: Charles Owens <cowens@greatbaysoftware.com> To: Jack Vogel <jfvogel@gmail.com> Cc: freebsd-net@freebsd.org Subject: Re: em(4): 4-port Intel Pro/1000 PF card not detected Message-ID: <4CE1A9F1.8050400@greatbaysoftware.com> In-Reply-To: <AANLkTikjsJ%2BuFyf-aMJDURz5no8rL_CsgEZG2PbRcfY0@mail.gmail.com> References: <4CDDBAC6.6080500@greatbaysoftware.com> <AANLkTinft6Ts4zK46wPdj4YWsRYE_uEwgDMQfWsHtDA1@mail.gmail.com> <4CE1913D.7010207@greatbaysoftware.com> <AANLkTikjsJ%2BuFyf-aMJDURz5no8rL_CsgEZG2PbRcfY0@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------000907040203000307000807
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
X-WatchGuard-AntiVirus: part scanned. clean action=allow
Jack, I'm afraid that with the card _not_ installed we get identical
pciconf output. We're running 32 bit simply because that's where we got
rolling with our product, and have not yet made the call to invest in
the effort required to make the jump to 64. Do you think that our being
at 32 bit could be a factor here?
So far the same card model has been tested on several of these server
appliances, so I doubt it's a bad-slot situation.
In case it's helpful, I've attached a boot log. Anything else that I
can provide that might help?
Thank you,
Charles
On 11/15/10 3:23 PM, Jack Vogel wrote:
> UH, did you do that with the adapter in the system?? I do not see the ID I
> expected
> to see. Some reason you're running 32 bit??
>
> Can you run the pciconf with the adapter in and out, compare and tell me
> what its
> ID is? All the unidentified devices I see are in the 0x3XXX range and those
> are not
> network devices.
>
> Maybe its a bad slot?
>
> Jack
>
>
> On Mon, Nov 15, 2010 at 11:59 AM, Charles Owens<cowens@greatbaysoftware.com
>> wrote:
>> Great... thanks! Please see attached. BTW, the system is running
>> 8.0-RELEASE-p2 i386 (PAE).
>>
>>
>> Charles
>>
>>
>>
>> On 11/13/10 2:24 AM, Jack Vogel wrote:
>>
>> pciconf -l please, I'll betcha these are the new quad ports that are in my
>> next igb driver
>> update, it would have gone in already but I've been fighting a bug in the
>> header split
>> code.
>>
>> Show me what the output looks like, and I'll get ya fixed up, dont worry :)
>>
>> Jack
>>
>>
>> On Fri, Nov 12, 2010 at 2:08 PM, Charles Owens<
>> cowens@greatbaysoftware.com> wrote:
>>
>>> Hello,
>>>
>>> We're trying to work with newly purcharsed Intel EXPi9404PF NICs ("Intel
>>> PRO/1000 PF Quad Port Server Adapter") but they do not seem to be detected
>>> (no ports showing with 'ifconfig -l'). We're having no problems with the
>>> 2-port version of the same card -- is there a known issue with the 4-port
>>> version?
>>>
>>> We've tried three different cards of this model, all with same result.
>>> Thanks in advance for any help.
>>>
>>> Charles
>>>
>>> --
>>> Charles Owens
>>> Great Bay Software, Inc.
>>>
>>>
>>>
>>> _______________________________________________
>>> freebsd-net@freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-net
>>> To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
>>>
>>
> _______________________________________________
> freebsd-net@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
>
>
--------------000907040203000307000807
Content-Type: text/plain;
name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg.txt"
X-WatchGuard-AntiVirus: scanned 'dmesg.txt'. clean action=allow
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE-p2 #8: Mon Apr 19 16:31:20 UTC 2010
sethj@newcastle.greatbaysoftware.com:/usr/obj/usr/src/sys/BEACON
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz (2261.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100000<NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 6442450944 (6144 MB)
avail memory = 6202404864 (5915 MB)
ACPI APIC Table: <INTEL S5520UR >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
cpu8 (AP): APIC ID: 16
cpu9 (AP): APIC ID: 17
cpu10 (AP): APIC ID: 18
cpu11 (AP): APIC ID: 19
cpu12 (AP): APIC ID: 20
cpu13 (AP): APIC ID: 21
cpu14 (AP): APIC ID: 22
cpu15 (AP): APIC ID: 23
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
ispfw: registered firmware <isp_1040>
ispfw: registered firmware <isp_1040_it>
ispfw: registered firmware <isp_1080>
ispfw: registered firmware <isp_1080_it>
ispfw: registered firmware <isp_12160>
ispfw: registered firmware <isp_12160_it>
ispfw: registered firmware <isp_2100>
ispfw: registered firmware <isp_2200>
ispfw: registered firmware <isp_2300>
ispfw: registered firmware <isp_2322>
ispfw: registered firmware <isp_2400>
ispfw: registered firmware <isp_2400_multi>
ispfw: registered firmware <isp_2500>
ispfw: registered firmware <isp_2500_multi>
kbd0 at kbdmux0
acpi0: <INTEL S5520UR> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port 0x2020-0x203f mem 0xb1a20000-0xb1a3ffff,0xb1a44000-0xb1a47fff irq 40 at device 0.0 on pci1
igb0: Using MSIX interrupts with 3 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: Ethernet address: 00:15:17:b4:cf:e4
igb1: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port 0x2000-0x201f mem 0xb1a00000-0xb1a1ffff,0xb1a40000-0xb1a43fff irq 28 at device 0.1 on pci1
igb1: Using MSIX interrupts with 3 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: Ethernet address: 00:15:17:b4:cf:e5
pcib2: <ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 33 at device 10.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x30c0-0x30df irq 19 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x103f
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0x30a0-0x30bf irq 19 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x003f
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0x3080-0x309f irq 19 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x003f
usbus2: <UHCI (generic) USB controller> on uhci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xb1b21000-0xb1b213ff irq 19 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib6
mfi0: <LSI MegaSAS 1078> port 0x1000-0x10ff mem 0xb1900000-0xb193ffff,0xb1940000-0xb197ffff irq 16 at device 0.0 on pci6
mfi0: Megaraid SAS driver Ver 3.00
mfi0: [ITHREAD]
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> mem 0xb0000000-0xb0ffffff,0xb1800000-0xb1803fff,0xb1000000-0xb17fffff irq 16 at device 0.0 on pci7
pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci8: <ACPI PCI bus> on pcib8
uhci3: <UHCI (generic) USB controller> port 0x3060-0x307f irq 16 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x003f
usbus4: <UHCI (generic) USB controller> on uhci3
uhci4: <UHCI (generic) USB controller> port 0x3040-0x305f irq 16 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x003f
usbus5: <UHCI (generic) USB controller> on uhci4
uhci5: <UHCI (generic) USB controller> port 0x3020-0x303f irq 16 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x003f
usbus6: <UHCI (generic) USB controller> on uhci5
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xb1b20000-0xb1b203ff irq 16 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <EHCI (generic) USB 2.0 controller> on ehci1
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci9: <ACPI PCI bus> on pcib9
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0x3138-0x313f,0x314c-0x314f,0x3130-0x3137,0x3148-0x314b,0x3110-0x311f,0x3100-0x310f irq 18 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH10 SATA300 controller> port 0x3128-0x312f,0x3144-0x3147,0x3120-0x3127,0x3140-0x3143,0x30f0-0x30ff,0x30e0-0x30ef irq 21 at device 31.5 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
acpi_button0: <Sleep Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
cpu8: <ACPI CPU> on acpi0
est8: <Enhanced SpeedStep Frequency Control> on cpu8
p4tcc8: <CPU Frequency Thermal Control> on cpu8
cpu9: <ACPI CPU> on acpi0
est9: <Enhanced SpeedStep Frequency Control> on cpu9
p4tcc9: <CPU Frequency Thermal Control> on cpu9
cpu10: <ACPI CPU> on acpi0
est10: <Enhanced SpeedStep Frequency Control> on cpu10
p4tcc10: <CPU Frequency Thermal Control> on cpu10
cpu11: <ACPI CPU> on acpi0
est11: <Enhanced SpeedStep Frequency Control> on cpu11
p4tcc11: <CPU Frequency Thermal Control> on cpu11
cpu12: <ACPI CPU> on acpi0
est12: <Enhanced SpeedStep Frequency Control> on cpu12
p4tcc12: <CPU Frequency Thermal Control> on cpu12
cpu13: <ACPI CPU> on acpi0
est13: <Enhanced SpeedStep Frequency Control> on cpu13
p4tcc13: <CPU Frequency Thermal Control> on cpu13
cpu14: <ACPI CPU> on acpi0
est14: <Enhanced SpeedStep Frequency Control> on cpu14
p4tcc14: <CPU Frequency Thermal Control> on cpu14
cpu15: <ACPI CPU> on acpi0
est15: <Enhanced SpeedStep Frequency Control> on cpu15
p4tcc15: <CPU Frequency Thermal Control> on cpu15
ipmi1: <IPMI System Interface> on isa0
device_attach: ipmi1 attach returned 16
pmtimer0 on isa0
ipmi1: <IPMI System Interface> on isa0
device_attach: ipmi1 attach returned 16
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: parallel port not found.
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
mfid0: <MFI Logical Disk> on mfi0
mfid0: 303268MB (621092864 sectors) RAID volume '' is optimal
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ipmi0: IPMI device rev. 1, firmware rev. 0.2, version 2.0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
ipmi0: Number of channels 2
ipmi0: Attached watchdog
AcpiOsExecute: failed to enqueue task, consider increasing the debug.acpi.max_tasks tunable
ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HEC2.HSCI] (Node 0xccbff740), AE_NO_MEMORY
ACPI Error (psparse-0633): Method parse/execution failed [\\_GPE._L06] (Node 0xccc06620), AE_NO_MEMORY
ACPI Exception: AE_NO_MEMORY, while evaluating GPE method [_L06] 20090521 evgpe-705
AcpiOsExecute: failed to enqueue task, consider increasing the debug.acpi.max_tasks tunable
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic23: Forcing LINT1 to edge trigger
SMP: AP CPU #15 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic17: Forcing LINT1 to edge trigger
SMP: AP CPU #9 Launched!
lapic21: Forcing LINT1 to edge trigger
SMP: AP CPU #13 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic19: Forcing LINT1 to edge trigger
SMP: AP CPU #11 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic18: Forcing LINT1 to edge trigger
SMP: AP CPU #10 Launched!
lapic16: Forcing LINT1 to edge trigger
SMP: AP CPU #8 Launched!
lapic22: Forcing LINT1 to edge trigger
SMP: AP CPU #14 Launched!
lapic20: Forcing LINT1 to edge trigger
SMP: AP CPU #12 Launched!
GEOM_JOURNAL: Journal 633890079: mfid0s1a contains data.
GEOM_JOURNAL: Journal 633890079: mfid0s1a contains journal.
GEOM_JOURNAL: Journal mfid0s1a clean.
GEOM_JOURNAL: BIO_FLUSH not supported by mfid0s1a.
GEOM_JOURNAL: Journal 2623643331: mfid0s1d contains data.
GEOM_JOURNAL: Journal 2623643331: mfid0s1d contains journal.
GEOM_JOURNAL: Journal mfid0s1d clean.
GEOM_JOURNAL: BIO_FLUSH not supported by mfid0s1d.
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Root mount waiting for: usbus7 usbus3
ugen3.2: <vendor 0x0424> at usbus3
uhub8: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on usbus3
ugen7.2: <vendor 0x05e3> at usbus7
umass0: <vendor 0x05e3 USB Storage, class 0/0, rev 2.00/0.41, addr 2> on usbus7
umass0: SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus7 usbus3
uhub8: 4 ports with 4 removable, self powered
umass0:0:0:-1: Attached to scbus0
Root mount waiting for: usbus7 usbus3
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,1
(probe0:umass-sim0:0:0:0): Medium not present - tray closed
(probe0:umass-sim0:0:0:0): Unretryable error
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <TEAC DV-28S-V 1.0B> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ufs/root
ugen6.2: <vendor 0x0557> at usbus6
uhub9: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 2> on usbus6
ugen2.2: <American Megatrends Inc.> at usbus2
ukbd0: <Keyboard Interface> on usbus2
kbd1 at ukbd0
ums0: <Mouse Interface> on usbus2
ums0: 3 buttons and [Z] coordinates ID=0
uhub9: 4 ports with 4 removable, self powered
ugen6.3: <ATEN International Co. Ltd> at usbus6
ukbd1: <ATEN International Co. Ltd GCS1808 V3.0.294, class 0/0, rev 1.10/1.00, addr 3> on usbus6
kbd2 at ukbd1
uhid0: <ATEN International Co. Ltd GCS1808 V3.0.294, class 0/0, rev 1.10/1.00, addr 3> on usbus6
ums1: <ATEN International Co. Ltd GCS1808 V3.0.294, class 0/0, rev 1.10/1.00, addr 3> on usbus6
ums1: 5 buttons and [XYZ] coordinates ID=0
ums2: <ATEN International Co. Ltd GCS1808 V3.0.294, class 0/0, rev 1.10/1.00, addr 3> on usbus6
ums2: 3 buttons and [Z] coordinates ID=0
eth0: link state changed to UP
--------------000907040203000307000807--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4CE1A9F1.8050400>