From owner-freebsd-current Thu Mar 2 15:19:55 2000 Delivered-To: freebsd-current@freebsd.org Received: from sumail.seattleu.edu (seattleu.edu [206.81.198.65]) by hub.freebsd.org (Postfix) with ESMTP id DB28637BC55 for ; Thu, 2 Mar 2000 15:19:43 -0800 (PST) (envelope-from hodeleri@sumail.seattleu.edu) Received: (from hodeleri@localhost) by sumail.seattleu.edu (8.9.3/8.9.3) id PAA30678 for freebsd-current@freebsd.org; Thu, 2 Mar 2000 15:21:40 -0800 (PST) (envelope-from hodeleri) Date: Thu, 2 Mar 2000 15:21:40 -0800 From: "Dr. Brain" To: freebsd-current@freebsd.org Subject: EP401 PCMCIA ethernet Message-ID: <20000302152140.A28004@toxic.magnesium.net> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="J2SCkAp4GZ/dPZZf" X-Mailer: Mutt 1.0i Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG --J2SCkAp4GZ/dPZZf Content-Type: text/plain; charset=us-ascii I've got a laptop that is using one of these lovely little buggers, but not with -current. I recently upgraded to the 4.0-20000227 snapshot but to my disappointment, the card is not listed in pccard.conf. Previously I was running 3.2-PAO, and the card worked just fine. It is an ed0/NE2000 compliant card, and I think the pccard.conf entry should look like the pccard.conf attachment. I've also included the pccardd dumpcis information for the card for someone to take a look at. When I insert the card with the attached pccard.conf it reports: eric3 /kernel: pccard: card inserted, slot 0 eric3 pccardd[44]: No card in database for "RPTI"<"EP401 Ethernet NE2000 Compatible") When I insert the card with the standard pccard.conf it reports the same. (I had it printing out "No card in database for ""("")" once, but I forgot what I did.) The line from my kernel config looks like this: device ed0 at isa? port 0x320 irq 9 iomem 0xd8000 Any pointers? -- Eric Hodel - drbrain@segment7.net - http://segment7.net "If you understand what you're doing, you're not learning anything." -- A. L. --J2SCkAp4GZ/dPZZf Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="pccard.conf" io 0x240-0x360 irq 3 9 10 11 13 15 memory 0xd4000 96k card "RPTI" "EP401 Ethernet NE2000 Compatible" config 0x21 "ed0" 9 insert logger -t pccard: -s RPTI EP401 inserted insert /etc/pccard_ether remove logger -t pccard: -s RPTI EP401 removed remove /sbin/ifconfig delete --J2SCkAp4GZ/dPZZf Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="EP401.cisdump" Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: dc 00 ff Common memory device information: Device number 1, type Function specific, WPS = ON Speed = 100nS, Memory block size = 512b, 1 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3 000: 49 00 ff Attribute memory device information: Device number 1, type EEPROM, WPS = ON Speed = 250nS, Memory block size = 512b, 1 units Tuple #3, code = 0x15 (Version 1 info), length = 57 000: 04 01 52 50 54 49 00 45 50 34 30 31 20 45 74 68 010: 65 72 6e 65 74 20 4e 45 32 30 30 30 20 43 6f 6d 020: 70 61 74 69 62 6c 65 00 00 00 00 00 00 00 00 00 030: 00 00 00 00 00 00 00 00 ff Version = 4.1, Manuf = [RPTI],card vers = [EP401 Ethernet NE2000 Compatible] Addit. info = [],[],[],[],[],[],[],[],[],[],[],[],[],[],[],[] Tuple #4, code = 0x13 (Link target), length = 3 000: 43 49 53 Tuple #5, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #6, code = 0x1a (Configuration map), length = 5 000: 01 23 f8 03 03 Reg len = 2, config register addr = 0x3f8, last config = 0x23 Registers: XX------ Tuple #7, code = 0x1b (Configuration entry), length = 17 000: e0 81 1d 3f 55 4d 5d 06 86 46 26 fc 24 65 30 ff 010: ff Config index = 0x20(default) Interface byte = 0x81 (I/O) wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Continuous supply current: 1 x 100mA Max current average over 1 second: 1 x 100mA, ext = 0x46 Max current average over 10 ms: 2 x 100mA Wait scale Speed = 1.5 x 10 us Card decodes 4 address lines, 8 Bit I/O only IRQ modes: Level IRQ level = 4 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 20 08 ca 60 00 03 1f Config index = 0x20 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x300 block length = 0x20 Tuple #9, code = 0x1b (Configuration entry), length = 7 000: 21 08 ca 60 20 03 1f Config index = 0x21 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x320 block length = 0x20 Tuple #10, code = 0x1b (Configuration entry), length = 7 000: 22 08 ca 60 40 03 1f Config index = 0x22 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x340 block length = 0x20 Tuple #11, code = 0x1b (Configuration entry), length = 7 000: 23 08 ca 60 60 03 1f Config index = 0x23 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x360 block length = 0x20 Tuple #12, code = 0xff (Terminator), length = 0 2 slots found --J2SCkAp4GZ/dPZZf Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-20000227-CURRENT #0: Sun Feb 27 19:07:15 PST 2000 root@erich3.segment7.net:/usr/src/sys/compile/LAPTOP Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P54C (132.96-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Features=0x1bf real memory = 41943040 (40960K bytes) avail memory = 38047744 (37156K bytes) Preloaded elf kernel "kernel" at 0xc0297000. Intel Pentium detected, installing workaround for F00F bug npx0: on motherboard npx0: INT 16 interface apm0: on motherboard apm: found APM BIOS v1.1, connected at v1.1 pcib0: on motherboard pci0: on pcib0 chip1: at device 1.0 on pci0 pci0: at 2.0 irq 15 pcic-pci0: port 0x3e0-0x3e3 at device 4.0 on pci0 isa0: on motherboard fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 atkbdc0: at port 0x60-0x6f on isa0 atkbd0: irq 1 on atkbdc0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> pcic: management irq 10 pcic0: at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pccard0: on pcic0 pccard1: on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port sbc0: at port 0x220-0x22f irq 5 drq 1 on isa0 pcm0: on sbc0 ad0: 2067MB [4200/16/63] at ata0-master using BIOSPIO Mounting root from ufs:/dev/ad0s2a --J2SCkAp4GZ/dPZZf-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message