Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 02 Jul 2012 07:13:02 -0500
From:      John Merryweather Cooper <john_m_cooper@yahoo.com>
To:        freebsd-x11@freebsd.org
Subject:   Re: KMS Question
Message-ID:  <4FF1904E.7040604@yahoo.com>
In-Reply-To: <CAPS9%2BSuxXBOQGydbjxFGDSUNeCGuQhN7ZvJoVOz-ztTHh-5DTQ@mail.gmail.com>
References:  <alpine.BSF.2.00.1207020503160.63787@pukruppa.de> <201207021054.22814.erichfreebsdlist@ovitrap.com> <alpine.BSF.2.00.1207020610120.59952@pukruppa.de> <201207021126.38116.erichfreebsdlist@ovitrap.com> <alpine.BSF.2.00.1207020635090.59952@pukruppa.de> <CAN6yY1t7aHgV4YTAyLyFKGq9jfEohScxgftwL0p7AFyOV1fo5A@mail.gmail.com> <CAPS9%2BSuxXBOQGydbjxFGDSUNeCGuQhN7ZvJoVOz-ztTHh-5DTQ@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On 07/02/12 02:58, Andreas Nilsson wrote:
> On Mon, Jul 2, 2012 at 6:59 AM, Kevin Oberman <kob6558@gmail.com> wrote:
>
>> On Sun, Jul 1, 2012 at 9:39 PM, Peter Ulrich Kruppa <ulrich@pukruppa.de>
>> wrote:
>>> On Mon, 2 Jul 2012, Erich Dollansky wrote:
>>>
>>>> Hi,
>>>>
>>>> On Monday, July 02, 2012 11:13:56 AM Peter Ulrich Kruppa wrote:
>>>>> On Mon, 2 Jul 2012, Erich Dollansky wrote:
>>>>>
>>>>>> On Monday, July 02, 2012 10:16:43 AM Peter Ulrich Kruppa wrote:
>>>>>>>
>>>>>>> please correct me, if I misunderstood something about KMS .
>>>>>>>
>>>>>>> I built xorg-7.7 on FreeBSD 9.0-STABLE #0: Mon Jun 11 23:48:45
>>>>>>> CEST 2 amd64 .
>>>>>>>
>>>>>>> When I do a plain
>>>>>>>          # startx
>>>>>>> (no xorg.conf set) I receive
>>>>>>>
>>>>>> I do this:
>>>>>>
>>>>>> sudo kldload i915kms
>>>>>> sudo kldload acpi_call
>>>>>> sudo chmod 666 /dev/acpi
>>>>>> startx
>>>>> Actually this is my question: I cannot kldload these two modules
>>>>> because I don't have them. I believed I wouldn't need them since
>>>>> I don't have any Intel-chipset. Do I need them anyway?
>>>>
>>>> ok, then we need more information. What kind of machine do you have? CPU
>>>> and GPU?
>>> I have got an amd64 CPU and some ATI Radeon graphics chip. As far as I
>> have
>>> heard the latter isn't well supported, but I don't mind for now: It
>> should
>>> at least be able to run the default vesa driver.
>>>
>>>
>>>> To my knowledge, KMS needs an Intel i3, i5 or i7 to work. You cannot use
>>>> KMS with all other CPUs.
>>>>
>>>> You also do not need it if you have another GPU you want to use it in
>> the
>>>> system.
>>> So I have to patch my base system anyway?
>>> Where can I get the latest patches?
>>>
>>> Peter.
>>>
>>>> Erich
>>>>
>> 11 June is just about the date that the updates were all merged into
>> 9-Stable. I suggesting updating sources to at least 15 Jun (or, better
>> still, today) and buidl that. No additional patches are needed. DO NOT
>> SET "WITH_KMS"! KMS is ONLY for Intel CPU/GPU processors. You can give
>> it a try WITH_NEW_XORG, though. If you don't have KMS, you will not
>> have i915-kms.ko, so don't worry. (Maybe someone will volunteer to
> write an AMD/ATi KMS driver some day, but no one has to date.)
>> You might try an initial startx with no Xorg.conf file. It usually
>> works. You probably won't have a need for acpi_call, either, and it is
>> from the acpi_call port and not part of the base system. It lets you
>> poke at ACPI paramters.
>> --
>> R. Kevin Oberman, Network Engineer
>> E-mail: kob6558@gmail.com
>
>
> I have WITH_KMS ( and WITH_NEW_XORG ) set on my laptop which uses the
> nvidia binary driver. Works like a charm.
>
> But I agree with proposed solution: update sources and rebuild.
>
> Have you done the xorgmerge step?
>
> Best regards
> Andreas
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
>
I also have WITH_KMS and WITH_NEW_XORG set on my HP G7 which has an AMD 
Vision A4 chipset and is running under the X11 vesa driver.  I built it 
up from source after cleaning off the machine.  Works fine.
--
John M. Cooper

-- 
--
John M. Cooper




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4FF1904E.7040604>