Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 13 Jul 2001 11:42:01 -0700 (PDT)
From:      John Doe <rhamming2001@yahoo.com>
To:        alpha@freebsd.org
Subject:   Hmm...another panic
Message-ID:  <20010713184201.85324.qmail@web14807.mail.yahoo.com>

next in thread | raw e-mail | index | archive | help
Mounting root from ufs:/dev/da0a
SMP: AP CPU #1 Launched!
pid 41225 (conftest), uid 0: exited on signal 11 (core dumped)
pid 41226 (conftest), uid 0: exited on signal 11 (core dumped)
fxp0: promiscuous mode enabled
pid 55810 (tcpdump), uid 0: exited on signal 11 (core dumped)
fxp0: promiscuous mode disabled
panic: mutex Giant not owned at /usr/src/sys/vm/vm_map.c:2473
cpuid = 0; panic
panic: from debugger
cpuid = 0; panic
--

<sighs> i tried running tcpdump(8) ...and tcpdump core dumped and then the machine panicked
:)..anyone have this problem ? here is the dmesg

Unrecognized boot flag '0'.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Thu Jul 12 14:10:49 GMT 2001
    root@bcast.bgmulti.com:/usr/obj/usr/src/sys/TEST
ST6600
AlphaPC 264DP 500 MHz, 500MHz
8192 byte page size, 2 processors.
CPU: EV6 (21264) major=8 minor=4 extensions=0x303<BWX,FIX,MVI,PRECISE>
OSF PAL rev: 0x200290002012d
real memory  = 534233088 (521712K bytes)
avail memory = 513982464 (501936K bytes)
smp_start_secondary: can't send START command
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Preloaded elf kernel "kernel" at 0xfffffc000078a000.
tsunami0: <21271 Core Logic chipset>
pcib0: <21271 PCI host bus adapter> on tsunami0
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Cypress 82C693 ATA controller> port 0x10200-0x1020f,0x3f4-0x3f7,0x1f0-
0x1f7 irq 238 at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: interrupting at ISA irq 14
ata1: at 0x170 irq 15 on atapci0
ata1: interrupting at ISA irq 15
atapci1: <Cypress 82C693 ATA controller> port 0x374-0x377,0x170-0x177 irq 239 at
 device 5.2 on pci0
atapci1: Busmastering DMA not configured
pci0: <serial bus, USB> at 5.3 (no driver attached)
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0x10000-0x100ff mem 0x2321000-0x
2321fff irq 19 at device 6.0 on pci0
aic7895C: Ultra Wide Channel A, SCSI Id=7, 255 SCBs
ahc0: interrupting at TSUNAMI irq 19
ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0x10100-0x101ff mem 0x2322000-0x
2322fff irq 18 at device 6.1 on pci0
aic7895C: Ultra Wide Channel B, SCSI Id=7, 255 SCBs
ahc1: interrupting at TSUNAMI irq 18
pcib2: <PCI-PCI bridge> at device 7.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <display, VGA> at 4.0 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1000-0x101f mem 0x2000000-0x20fff
ff,0x2230000-0x2230fff irq 30 at device 5.0 on pci1
fxp0: interrupting at TSUNAMI irq 30
fxp0: Ethernet address 00:06:2b:00:76:2d
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <21271 PCI host bus adapter> on tsunami0
pci2: <PCI bus> on pcib1
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
atkbd1: <AT Keyboard> irq 1 on atkbdc0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: cannot reserve interrupt, failed.
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio0: interrupting at ISA irq 4
sio1: reserved for low-level i/o
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc1: cannot reserve I/O port range (6 ports)
sio3: reserved for low-level i/o
ppc1: cannot reserve I/O port range
Timecounter "i8254"  frequency 1193182 Hz
Waiting 15 seconds for SCSI devices to settle
pass3 at ahc0 bus 0 target 6 lun 0
pass3: <COMPAQ 54-2565x-* 0.01> Fixed Processor SCSI-2 device 
pass3: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST39102LC 7B04> Fixed Direct Access SCSI-2 device 
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST39102LC 7B04> Fixed Direct Access SCSI-2 device 
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <COMPAQ BD00911934 3B00> Fixed Direct Access SCSI-2 device 
da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
Mounting root from ufs:/dev/da0a
WARNING: / was not properly dismounted
lock order reversal
 1st 0xfffffc0000701830 clk @ /usr/src/sys/alpha/alpha/clock.c:702
 2nd 0xfffffc00006fa248 callout @ /usr/src/sys/kern/kern_timeout.c:184

Bruce\

__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010713184201.85324.qmail>