Date: Fri, 29 Aug 1997 12:00:04 -0500 (CDT) From: Craig Johnston <craig@gnofn.org> To: Howard Lew <hlew@www2.shoppersnet.com> Cc: "Jay D. Nelson" <jdn@qiv.com>, Cameron Slye <cslye@calweb.com>, hardware@FreeBSD.ORG Subject: Re: K6-200 Has anyone successfully done a 'make world' ? Message-ID: <Pine.GSO.3.95.970829115454.21759A-100000@sparkie.gnofn.org> In-Reply-To: <Pine.BSF.3.91.970827202733.15931A-100000@www2.shoppersnet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 27 Aug 1997, Howard Lew wrote: > On Wed, 27 Aug 1997, Jay D. Nelson wrote: > > The only way to overclock a K5 is to use a higher bus clock (i.e. 75MHz) > because of the way the clock multiplier on the K5 works. 75MHz will > generally work, but 83MHz will not. At 75MHz bus clock, the K5-166 will 83 works great with my hardware. I do 83 * 1.5 and it beats out 75 * 1.75 for most of the stuff I do. (125 Mhz vs 132 Mhz, the win being on bus speed.) K5-166, ABIT IT5H, 50ns EDO, symbios 53c810 SCSI, ati mach32 pci. > be probed and run at or almost at Pentium 200 speeds. Stability is > questionable though and depending on whether your MB supports async PCI, > 37.5MHz may be too high for some PCI SCSI cards. I had stability probs at 1.75 * 75 until I upped the CPUs voltage a little bit, to 3.6 from 3.52. At 3.52 make world dies, 3.6 works fine. ta, Craig
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.3.95.970829115454.21759A-100000>