Date: Thu, 30 Aug 2007 08:52:51 -0600 From: Scott Long <scottl@samsco.org> To: "Lutieri G." <lutierigbtrabalho@gmail.com> Cc: FREEBSD - SCSI - LIST <freebsd-scsi@freebsd.org> Subject: Re: performance with LSI SAS 1064 Message-ID: <46D6D9C3.6050202@samsco.org> In-Reply-To: <71d0ebb0708300737o4fc7966dj61cf0e68482da398@mail.gmail.com> References: <71d0ebb0708291245g79d2141fx73cc8a6e76875944@mail.gmail.com> <46D5E17F.3070403@samsco.org> <71d0ebb0708291416v17351c65u7ccc1b7bbe0271d2@mail.gmail.com> <46D5E5B1.207@samsco.org> <71d0ebb0708291506i49649a60l8006deafb20891ac@mail.gmail.com> <46D63710.1020103@freebsd.org> <71d0ebb0708300502x632fe83bo617f84ca2008dc7d@mail.gmail.com> <46D6BEC0.1050104@samsco.org> <46D6CB71.4030707@freebsd.org> <71d0ebb0708300737o4fc7966dj61cf0e68482da398@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
54MB/s is reasonable for 10k 2.5" disks. You might be able to squeeze some more performance by upgrading to FreeBSD 7.0. I _do_not_ recommend playing with the queue depth controls unless your console logs are getting quickly filled with messages about it. Scott Lutieri G. wrote: > This is my disks: > > Seagate Savvio(ST913401ss) 10K.1 SAS 3Gb/s 73-GB Hard Drive. In the > manual file i found this information: > > Queue tagging (up to 64 queue tags supported) > > Is this the max # for setting using camcontrol?! syntax like this: > camcontrol tags da0 -N 64 ?? > > 2007/8/30, Eric Anderson <anderson@freebsd.org>: >> Scott Long wrote: >>> Lutieri G. wrote: >>>> 2007/8/30, Eric Anderson <anderson@freebsd.org>: >>>>> I'm confused - you said in your first post you were getting 3MB/s, where >>>>> above you show something like 55MB/s. >>>> Sorry! using blogbench i got 3MB/s and 100% busy. Once is 100% busy i >>>> thinked that 3MB/s is the maximum speed. But i was wrong... >>> %busy is a completely useless number for a anything but untagged, >>> uncached disk subsystems. It's only an indirect measure of latency, and >>> there are better tools for measuring latency (gstat). >>> >>>>> You didn't say what kind of disks, or how many, the configuration, etc - >>>>> so it's hard to answer much. The 55MB/s seems pretty decent for many >>>>> hard drives in a sequential use state (which is what dd tests really). >>>>> >>>> SAS disks. Seagate, i don't know what is the right model of disks. >>>> >>>> Ok. If 55Mb/s is a decent speed i'm happy. I'm getting problems with >>>> squid cache and maybe should be a problem related with disks. But... >>>> i'm investigating and discharging problems. >>>> >>>> >>>>> Your errors before were probably caused because your queue depth is set >>>>> to 255 (or 256?) and the adapter can't do that many. You should use >>>>> camcontrol to reduce it, to maybe 32. See the camcontrol man page for >>>>> the right usage. It's something that needs setting on every boot, so a >>>>> startup file is a good place for it maybe. >>>>> >>>> Is there any way of get the right number to reduce?! >>>> >>> If you're seeing erratic performance in production _AND_ you're seeing >>> lots of accompanying messages on the console about tag depth jumping >>> around, you can use camcontrol to force the depth to a lower number of >>> you're choosing. This kind of problem is pretty rare, though. >> Scott, you are far more of a SCSI guru than I, so please correct me if >> this is incorrect. Can't you get a good estimate, by knowing the queue >> depth of the target(s), and dividing it by the number of initiators? So >> in his case, he has one initiator, and (let's say) one target. If the >> queue depth of the target (being the Seagate SAS drive) is 128 (see >> Seagate's paper here: >> http://www.seagate.com/staticfiles/support/disc/manuals/enterprise/savvio/Savvio%2015K.1/SAS/100407739b.pdf >> ), then he should have to reduce it down from 25[56] to 128, correct? >> >> With QLogic cards connected to a fabric, I saw queue depth issues under >> heavy load. >> >> Eric >> >> >> >> >> > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46D6D9C3.6050202>