Date: Sun, 19 Oct 2008 03:32:29 +1100 From: "Kristian Rooke" <kristianr@gmail.com> To: "Jeremy Chadwick" <koitsu@freebsd.org> Cc: freebsd-stable@freebsd.org Subject: Re: SETFEATURES SET TRANSFER MODE taskqueue timeout.. Error occuring constantly.. Please help!! Message-ID: <f9ccec500810180932k5fe192e1uc360afe41ae8581f@mail.gmail.com> In-Reply-To: <20081018102403.GA46124@icarus.home.lan> References: <f9ccec500810180100j7969b1eeucb6e974f37b05961@mail.gmail.com> <20081018102403.GA46124@icarus.home.lan>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks for the quick response!
Please see requested output below:
dmesg
=======================================================
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz (2533.35-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2145320960 (2045 MB)
avail memory = 1955590144 (1864 MB)
ACPI APIC Table: <Nvidia ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
acpi0: <Nvidia ASUSACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 100000, 7fdf0000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 617491806004918
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 617491806004918
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 1.0 (no driver attached)
pci0: <memory, RAM> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <memory, RAM> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
pci0: <memory, RAM> at device 1.5 (no driver attached)
pci0: <memory, RAM> at device 1.6 (no driver attached)
pci0: <memory, RAM> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 3.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 3.1 (no driver attached)
pci0: <memory, RAM> at device 3.2 (no driver attached)
pci0: <memory, RAM> at device 3.4 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xeffff000-0xefffffff irq
21 at device 4.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xefffe000-0xefffe0ff
irq 22 at device 4.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP73 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 8.0 on
pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <multimedia> at device 9.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci1: <ACPI PCI bus> on pcib1
atapci1: <SiI SiI 0680 UDMA133 controller> port
0xcf00-0xcf07,0xce00-0xce03,0xcd00-0xcd07,0xcc00-0xcc03,0xcb00-0xcb0f
mem 0xefbff000-0xefbff0ff irq 16 at device 5.0 on pci1
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
0xca00-0xca3f mem 0xefbc0000-0xefbdffff,0xefba0000-0xefbbffff irq 17
at device 6.0 on pci1
em0: Ethernet address: 00:0e:0c:81:65:5a
em0: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
atapci2: <nVidia ATA controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf700-0xf70f mem
0xefff8000-0xefff9fff irq 20 at device 14.0 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
pci0: <network, ethernet> at device 15.0 (no driver attached)
vgapci0: <VGA-compatible display> mem
0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq
22 at device 16.0 on pci0
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd9000-0xd9fff pnpid
ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
hptrr: no controller detected.
ad0: 76319MB <Seagate ST380011A 3.06> at ata0-master PIO4
ad4: 305245MB <Seagate ST3320620A 3.AAF> at ata2-master PIO4
ad5: 305245MB <Seagate ST3320620A 3.AAF> at ata2-slave PIO4
ad6: 715404MB <Seagate ST3750640A 3.AAE> at ata3-master PIO4
ad7: 305245MB <Seagate ST3320620A 3.AAD> at ata3-slave PIO4
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 4 files 1
WARNING: /new_movies was not properly dismounted
WARNING: /mp3s_apps was not properly dismounted
WARNING: /tv_shows was not properly dismounted
WARNING: /old_movies was not properly dismounted
em0: link state changed to UP
=======================================================
pciconf -lv
=======================================================
hostb0@pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x07c110de
rev=0xa2 hdr=0x00
vendor = 'Nvidia Corp'
class = bridge
subclass = HOST-PCI
none0@pci0:0:0:1: class=0x050000 card=0x00000000 chip=0x07cb10de
rev=0xa2 hdr=0x00
vendor = 'Nvidia Corp'
class = memory
subclass = RAM
none1@pci0:0:1:0: class=0x050000 card=0x00000000 chip=0x07cd10de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = memory
subclass = RAM
none2@pci0:0:1:1: class=0x050000 card=0x00000000 chip=0x07ce10de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = memory
subclass = RAM
none3@pci0:0:1:2: class=0x050000 card=0x00000000 chip=0x07cf10de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = memory
subclass = RAM
none4@pci0:0:1:3: class=0x050000 card=0x00000000 chip=0x07d010de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = memory
subclass = RAM
none5@pci0:0:1:4: class=0x050000 card=0x00000000 chip=0x07d110de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = memory
subclass = RAM
none6@pci0:0:1:5: class=0x050000 card=0x00000000 chip=0x07d210de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = memory
subclass = RAM
none7@pci0:0:1:6: class=0x050000 card=0x00000000 chip=0x07d310de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = memory
subclass = RAM
none8@pci0:0:2:0: class=0x050000 card=0x00000000 chip=0x07d610de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = memory
subclass = RAM
isab0@pci0:0:3:0: class=0x060100 card=0x82ae1043 chip=0x07d710de
rev=0xa2 hdr=0x00
vendor = 'Nvidia Corp'
class = bridge
subclass = PCI-ISA
none9@pci0:0:3:1: class=0x0c0500 card=0x82ae1043 chip=0x07d810de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = serial bus
subclass = SMBus
none10@pci0:0:3:2: class=0x050000 card=0x00000000 chip=0x07d910de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = memory
subclass = RAM
none11@pci0:0:3:4: class=0x050000 card=0x00000000 chip=0x07c810de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = memory
subclass = RAM
ohci0@pci0:0:4:0: class=0x0c0310 card=0x82ae1043 chip=0x07fe10de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = serial bus
subclass = USB
ehci0@pci0:0:4:1: class=0x0c0320 card=0x82ae1043 chip=0x056a10de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = serial bus
subclass = USB
atapci0@pci0:0:8:0: class=0x01018a card=0x82ae1043 chip=0x056c10de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = mass storage
subclass = ATA
none12@pci0:0:9:0: class=0x040300 card=0x829f1043 chip=0x07fc10de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = multimedia
pcib1@pci0:0:10:0: class=0x060401 card=0xcb7310de chip=0x056d10de
rev=0xa1 hdr=0x01
vendor = 'Nvidia Corp'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:11:0: class=0x060400 card=0x000010de chip=0x056e10de
rev=0xa1 hdr=0x01
vendor = 'Nvidia Corp'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:12:0: class=0x060400 card=0x000010de chip=0x056f10de
rev=0xa1 hdr=0x01
vendor = 'Nvidia Corp'
class = bridge
subclass = PCI-PCI
pcib4@pci0:0:13:0: class=0x060400 card=0x000010de chip=0x056f10de
rev=0xa1 hdr=0x01
vendor = 'Nvidia Corp'
class = bridge
subclass = PCI-PCI
atapci2@pci0:0:14:0: class=0x010185 card=0x82ae1043 chip=0x07f010de
rev=0xa2 hdr=0x00
vendor = 'Nvidia Corp'
class = mass storage
subclass = ATA
none13@pci0:0:15:0: class=0x020000 card=0x82ae1043 chip=0x07dc10de
rev=0xa2 hdr=0x00
vendor = 'Nvidia Corp'
class = network
subclass = ethernet
vgapci0@pci0:0:16:0: class=0x030000 card=0x82ae1043 chip=0x07e110de
rev=0xa2 hdr=0x00
vendor = 'Nvidia Corp'
class = display
subclass = VGA
atapci1@pci0:1:5:0: class=0x018000 card=0x06801095 chip=0x06801095
rev=0x02 hdr=0x00
vendor = 'Silicon Image Inc (Was: CMD Technology Inc)'
device = 'SiI 0680 (Was: PCI-0680) Ultra ATA133 EIDE Controller'
class = mass storage
em0@pci0:1:6:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'PRO/1000 GT'
class = network
subclass = ethernet
=======================================================
atacontrol list
=======================================================
ATA channel 0:
Master: ad0 <ST380011A/3.06> ATA/ATAPI revision 6
Slave: no device present
ATA channel 1:
Master: no device present
Slave: no device present
ATA channel 2:
Master: ad4 <ST3320620A/3.AAF> ATA/ATAPI revision 7
Slave: ad5 <ST3320620A/3.AAF> ATA/ATAPI revision 7
ATA channel 3:
Master: ad6 <ST3750640A/3.AAE> ATA/ATAPI revision 7
Slave: ad7 <ST3320620A/3.AAD> ATA/ATAPI revision 7
ATA channel 4:
Master: no device present
Slave: no device present
ATA channel 5:
Master: no device present
Slave: no device present
=======================================================
smartctl -a /dev/ad4
=======================================================
smartctl version 5.38 [i386-portbld-freebsd7.0] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10 family
Device Model: ST3320620A
Serial Number: 9QF7CSMD
Firmware Version: 3.AAF
User Capacity: 320,072,933,376 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Oct 19 03:25:30 2008 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 109 089 006 Pre-fail
Always - 23525740
3 Spin_Up_Time 0x0003 096 095 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 51
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 085 060 030 Pre-fail
Always - 341335872
9 Power_On_Hours 0x0032 092 092 000 Old_age
Always - 7799
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 51
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 069 060 045 Old_age
Always - 31 (Lifetime Min/Max 29/35)
194 Temperature_Celsius 0x0022 031 040 000 Old_age
Always - 31 (0 18 0 0)
195 Hardware_ECC_Recovered 0x001a 059 055 000 Old_age
Always - 132329316
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age
Always - 0
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 57 hours (2 days + 9 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 09 00 00 f0 00 00:00:20.412 READ DMA
c6 00 10 00 00 00 f0 00 00:00:47.684 SET MULTIPLE MODE
ef 02 00 00 00 00 f0 00 00:00:47.684 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 f0 00 00:00:47.684 SET FEATURES [Enable read
look-ahead]
ef 03 45 00 00 00 f0 00 00:00:47.684 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
=======================================================
smartctl -a /dev/ad5
=======================================================
smartctl version 5.38 [i386-portbld-freebsd7.0] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10 family
Device Model: ST3320620A
Serial Number: 5QF3V3LS
Firmware Version: 3.AAF
User Capacity: 320,072,933,376 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Oct 19 03:26:47 2008 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 110 091 006 Pre-fail
Always - 25351310
3 Spin_Up_Time 0x0003 096 095 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 98
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail
Always - 484925972
9 Power_On_Hours 0x0032 087 087 000 Old_age
Always - 11956
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 105
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 071 059 045 Old_age
Always - 29 (Lifetime Min/Max 28/35)
194 Temperature_Celsius 0x0022 029 041 000 Old_age
Always - 29 (0 16 0 0)
195 Hardware_ECC_Recovered 0x001a 069 064 000 Old_age
Always - 95438022
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
=======================================================
smartctl -a /dev/ad6
=======================================================
smartctl version 5.38 [i386-portbld-freebsd7.0] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10 family
Device Model: ST3750640A
Serial Number: 5QD26EDJ
Firmware Version: 3.AAE
User Capacity: 750,156,374,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Oct 19 03:27:38 2008 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 202) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 102 093 006 Pre-fail
Always - 83213413
3 Spin_Up_Time 0x0003 094 093 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 17
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail
Always - 250078910
9 Power_On_Hours 0x0032 096 096 000 Old_age
Always - 3992
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 25
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 066 058 045 Old_age
Always - 34 (Lifetime Min/Max 34/39)
194 Temperature_Celsius 0x0022 034 042 000 Old_age
Always - 34 (0 24 0 0)
195 Hardware_ECC_Recovered 0x001a 066 061 000 Old_age
Always - 154205035
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
=======================================================
smartctl -a /dev/ad7
=======================================================
smartctl version 5.38 [i386-portbld-freebsd7.0] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10 family
Device Model: ST3320620A
Serial Number: 9QF021DF
Firmware Version: 3.AAD
User Capacity: 320,072,933,376 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Oct 19 03:28:50 2008 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 103 089 006 Pre-fail
Always - 217808009
3 Spin_Up_Time 0x0003 096 095 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 83
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 088 060 030 Pre-fail
Always - 763205966
9 Power_On_Hours 0x0032 086 086 000 Old_age
Always - 12512
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 140
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 068 049 045 Old_age
Always - 32 (Lifetime Min/Max 32/37)
194 Temperature_Celsius 0x0022 032 051 000 Old_age
Always - 32 (0 22 0 0)
195 Hardware_ECC_Recovered 0x001a 061 055 000 Old_age
Always - 174542800
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age
Always - 0
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 6310 hours (262 days + 22 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 00 00 00 f0 00 00:01:18.769 READ DMA
c8 00 01 09 00 00 f0 00 00:00:47.673 READ DMA
c6 00 10 00 00 00 f0 00 00:00:47.673 SET MULTIPLE MODE
ef 02 00 00 00 00 f0 00 00:00:47.673 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 f0 00 00:00:47.673 SET FEATURES [Enable read
look-ahead]
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
=======================================================
On Sat, Oct 18, 2008 at 9:24 PM, Jeremy Chadwick <koitsu@freebsd.org> wrote:
> On Sat, Oct 18, 2008 at 07:00:42PM +1100, Kristian Rooke wrote:
>> Hi,
>>
>> I have a PC/box with 5 disks in it that I am using as a fileserver and
>> I recently upgraded some hardware and installed FreeBSD 7.0-RELEASE.
>> Previously I had a RAID PATA IDE controller on the motherboard (was
>> not using RAID functionality though), but I when I upgraded I had to
>> use a PCI IDE controller, due to the lack of PATA ports on the new
>> motherboard.
>> Now when I am attempting to write files, or do anything more than just
>> browse filesystems on the drives ad4-ad7, I get multiple occurrences
>> of the errors below. After these errors occur the kernel panics and I
>> need to perform a hard reset to get the server back up again.
>>
>> Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SETFEATURES SET
>> TRANSFER MODE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SETFEATURES SET
>> TRANSFER MODE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SETFEATURES ENABLE
>> RCACHE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SETFEATURES ENABLE
>> WCACHE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SET_MULTI taskqueue
>> timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SETFEATURES SET
>> TRANSFER MODE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SETFEATURES SET
>> TRANSFER MODE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SETFEATURES ENABLE
>> RCACHE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SETFEATURES ENABLE
>> WCACHE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SET_MULTI taskqueue
>> timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad6: FAILURE - WRITE_DMA timed out
>> LBA=163323135
>> Sep 28 11:40:28 FileServer kernel:
>> g_vfs_done():ad6s1[WRITE(offset=83621412864, length=16384)]error = 5
>> <some output omitted>
>> Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SETFEATURES SET
>> TRANSFER MODE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SETFEATURES SET
>> TRANSFER MODE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SETFEATURES ENABLE
>> RCACHE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SETFEATURES ENABLE
>> WCACHE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SET_MULTI taskqueue
>> timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SETFEATURES SET
>> TRANSFER MODE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SETFEATURES SET
>> TRANSFER MODE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SETFEATURES ENABLE
>> RCACHE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SETFEATURES ENABLE
>> WCACHE taskqueue timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SET_MULTI taskqueue
>> timeout - completing request directly
>> Sep 28 11:40:28 FileServer kernel: ad5: FAILURE - WRITE_DMA timed out LBA=287
>>
>> I have taken a read through some previous conversations, but I can't
>> seem to find the answers I'm looking for.
>>
>> I've changed the IDE cables and the PATA controller and it is still
>> not making any difference.
>>
>> I also added hw.ata.ata_dma=0 to /boot/loader.conf as recommended in a
>> wiki I came across, but if anything it made the issue even worse.
>>
>> Can someone please help?
>
> Tracking these problems down takes a lot of time. I hope you have the
> time. :-) Can you please provide the following output:
>
> # dmesg
> # pciconf -lv
> # atacontrol list
>
> Also, please install ports/sysutils/smartmontools (version 5.38 or
> newer), and provide output for the following commands:
>
> # smartctl -a /dev/ad4
> # smartctl -a /dev/ad5
> # smartctl -a /dev/ad6
> # smartctl -a /dev/ad7
>
> Thanks.
>
> --
> | Jeremy Chadwick jdc at parodius.com |
> | Parodius Networking http://www.parodius.com/ |
> | UNIX Systems Administrator Mountain View, CA, USA |
> | Making life hard for others since 1977. PGP: 4BD6C0CB |
>
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?f9ccec500810180932k5fe192e1uc360afe41ae8581f>