Date: Wed, 19 Jun 2002 10:20:02 -0600 (MDT) From: "M. Warner Losh" <imp@village.org> To: john@kozubik.com Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: connecting aironet and lucent 802.11b in ad hoc mode Message-ID: <20020619.102002.37454326.imp@village.org> In-Reply-To: <Pine.BSF.4.21.0206182355160.3595-100000@www> References: <Pine.BSF.4.21.0206182355160.3595-100000@www>
next in thread | previous in thread | raw e-mail | index | archive | help
In message: <Pine.BSF.4.21.0206182355160.3595-100000@www>
John Kozubik <john@kozubik.com> writes:
:
: There is some confusion[1] as to how you get `an` cards to talk to `wi`
: cards (cisco aironet talking to lucent) in FreeBSD - it is non-intuitive.
:
: Here is the process:
:
: 1. on the wi side, set -c 1, and set -q "something", leave port type BSS.
: (do NOT configure as ad-hoc)
:
: 2. on the an side, set -o 0 (ad-hoc) and `-v 1 -n "something"`
:
: 3. I have tested this on channels 1,10, and 6, using FreeBSD 4.5-RELEASE
:
: NOTE: output of `ifconfig -a` will say "status: no carrier" on the
: system with the lucent card. The `ifconfig -a` output on the
: system with the aironet card will say "status: associated"
:
: 4. SPEED TEST: (an says 11Mbps <adhoc>, wi says 2Mbps)
: 1048576 bytes sent in 2.25 seconds (454.38KB/s) 3.635 mb/s
: 1048576 bytes sent in 2.20 seconds (465.75KB/s) 3.726 mb/s
: (got same speeds on a file 10x that big)
: (using laptops with _slow_ (4200 rpm?) hard drives)
:
: Step 1 refers to `wicontrol` commands. Example: `wicontrol -i wi0 -c 1`
:
: Step 2 refers to `ancontrol` commands. Example: `ancontrol -i an0 -o 0`
:
:
: [1] Thread on freebsd-mobile dated 2001-11-12
Soon it should be as simple as doing
ifconfig an0 mediaopt ibss
ifconfig wi0 mediaopt ibss
Also, the above WILL NOT WORK AT ALL if you have old firmware on your
lucent cards. The old lucent cards won't do true 802.11b ibss mode
before about 6.04 or so. If your firmware is too old, you lose.
Warner
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020619.102002.37454326.imp>