From owner-freebsd-questions Tue Oct 23 13:50:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns-exch05.jccc.net (ns-exch05.jccc.net [198.248.56.5]) by hub.freebsd.org (Postfix) with ESMTP id 5C95137B401 for ; Tue, 23 Oct 2001 13:50:16 -0700 (PDT) Received: by ns-exch05 with Internet Mail Service (5.5.2653.19) id ; Tue, 23 Oct 2001 15:45:55 -0500 Message-ID: From: Noah Dunker To: Noah Dunker , questions@FreeBSD.ORG Subject: RE: WTF is up with my Laptop's Mouse?! Date: Tue, 23 Oct 2001 15:45:53 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG By the way... This is my Kernel Config if anyone cares. Addendum - I'm actually working with 4.3-RELEASE, not 4.4. My Bad. # # CHIMAERA - Tweaked GENERIC with some more network and laptop options # machine i386 cpu I386_CPU cpu I486_CPU cpu I586_CPU cpu I686_CPU ident GENERIC maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets) options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured device adv0 at isa? device adw device bt0 at isa? device aha0 at isa? device aic0 at isa? device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers interfaced to the SCSI subsystem device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID device dpt # DPT Smartcache - See LINT for options! device mly # Mylex AcceleRAID/eXtremeRAID # RAID controllers device aac # Adaptec FSA RAID, Dell PERC2/PERC3 device ida # Compaq Smart RAID device amr # AMI MegaRAID device mlx # Mylex DAC960 family device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support device card device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device fxp # Intel EtherExpress PRO/100B (82557, 82558) device tx # SMC 9432TX (83c170 ``EPIC'') device vx # 3Com 3c590, 3c595 (``Vortex'') device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device pcn # AMD Am79C79x PCI 10/100 NICs device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 device ex device ep device fe0 at isa? port 0x300 # Xircom Ethernet device xe # PRISM I IEEE 802.11b wireless NIC. device awi # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attachment needed # and resources will always be dynamically assigned by the pccard code. device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those parameters here. device an # The probe order of these is presently determined by i386/isa/isa_compat.c. device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet device cd device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device pcm device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 options INCLUDE_CONFIG_FILE options NETATALK options PPP_FILTER options BRIDGE options DUMMYNET options ICMP_BANDLIM options IPDIVERT options IPFILTER options IPFILTER_LOG options IPFIREWALL options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_FORWARD options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=100 options IPSEC options IPSEC_ESP options IPSTEALTH options IPV6FIREWALL options IPV6FIREWALL_DEFAULT_TO_ACCEPT options IPV6FIREWALL_VERBOSE options IPV6FIREWALL_VERBOSE_LIMIT=100 pseudo-device bpf 4 pseudo-device tun 1 pseudo-device faith 1 pseudo-device gif 4 pseudo-device snp 3 pseudo-device speaker -----Original Message----- From: Noah Dunker Sent: Tuesday, October 23, 2001 3:19 PM To: questions@FreeBSD.ORG Subject: WTF is up with my Laptop's Mouse?! I'm messing with 4.4-Release on an NEC Ready 120LT Subnotebook. The "stick mouse" is enabled in the setup. When I'm using the computer normally, it works fine, but when I attach it's external CD-ROM drive, the mouse just doesn't show up and it's really grating on me. It doesn't seem to be an IRQ Conflict. Wihtout CD-ROM Drive hooked up: [root@chimaera]# moused -t auto -p /dev/psm0 [root@chimaera]# dmesg | grep irq pcic-pci0: irq 11 at device 3.0 on pci0 pci0: at 4.0 irq 0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 psm0: irq 12 on atkbdc0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: at port 0x378-0x37f irq 7 on isa0 sbc0: at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0 ep0: <3Com 3C574B, Megahertz 3CCFE574BT or Fast Etherlink 3C574-TX> at port 0x240-0x25f irq 3 slot 0 on pccard0 (Notice the psm0 on IRQ 12?) Again... With the CD-ROM hooked up: [root@chimaera]# moused -t auto -p /dev/psm0 moused: unable to open /dev/psm0: Device not configured [root@chimaera]# dmesg | grep irq pcic-pci0: irq 11 at device 3.0 on pci0 pci0: at 4.0 irq 0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: at port 0x378-0x37f irq 7 on isa0 sbc0: at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0 ep0: <3Com 3C574B, Megahertz 3CCFE574BT or Fast Etherlink 3C574-TX> at port 0x240-0x25f irq 3 slot 0 on pccard0 (now there is an ata1 on IRQ 15... which should not conflict with the mouse on IRQ 12. But where did psm0 on IRQ 12 GO?!?!) --Angry! Noah Dunker Systems Analyst/Technician Johnson County Community College To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message