Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 29 Oct 2001 14:13:16 -0000
From:      "Simon Griffiths" <simon.g@claycrossbs.co.uk>
To:        <freebsd-hackers@freebsd.org>
Cc:        <freebsd-stable@freebsd.org>
Subject:   PCChips M765VMRT VIA 82C596B and Smbbus
Message-ID:  <NEBBJFKEHEOLHKCGOHFOEEBPDJAA.simon.g@claycrossbs.co.uk>

next in thread | raw e-mail | index | archive | help
Hi There,

[posted to -questions some time back]

I'm trying to get the power monitoring functions of this motherboard going
and have run into some problems.

I've found this doesnt seem to be supported at all in 4.4 but have found
some code on http://people.freebsd.org/~nsouch/iicbus.html and attempted to
patch it.  Problem here with the diffs is they are out of sync with the
4.4-STABLE
tree.

Could anyone provide any help with getting this code either working or
provide any advice on the next steps.

Thanks in advance,

Si.

The diag info's.

FreeBSD breakbeat.inner-city.org.uk 4.4-STABLE FreeBSD 4.4-STABLE #0: Tue
Oct
9 19:26:34 BST 2001
bill@breakbeat.inner-city.org.uk:/usr/obj/usr/src/sys/BREAKBEAT  i386

FreeBSD 4.4-STABLE #0: Tue Oct  9 19:26:34 BST 2001
    bill@breakbeat.inner-city.org.uk:/usr/obj/usr/src/sys/BREAKBEAT
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (267.27-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x650  Stepping = 0

Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
real memory  = 184483840 (180160K bytes)
avail memory = 175304704 (171196K bytes)
Preloaded elf kernel "kernel" at 0xc0413000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 10
isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 ATA66 controller> port 0xffa0-0xffaf at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xdf00-0xdf1f irq 9 at device 7.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichsmb0: <SMBus controller> at device 7.3 on pci0
device_probe_and_attach: ichsmb0 attach returned 6

[snipped rest]

--
Simon Griffiths
Systems Administrator - Clay Cross Building Society
Tel:+44(0)1246 862120 - Fax: +44(0)1246 250397
--
"If you give a million monkeys root access to your systems, they
  sure as hell aren't going to be writing any Shakespeare..."



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NEBBJFKEHEOLHKCGOHFOEEBPDJAA.simon.g>