Date: Wed, 30 Jul 2003 00:32:05 +0200 From: =?ISO-8859-15?Q?Francisco_G=F3mez_Mar=EDn?= <francisco@gomezmarin.com> To: freebsd-questions@freebsd.org Subject: Re: USB keyboard with touchpad Message-ID: <3F26F5E5.2000905@gomezmarin.com> In-Reply-To: <3F26F495.9040509@gomezmarin.com> References: <3F26F495.9040509@gomezmarin.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------080105050308030107000200 Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 8bit Here is the dmesg if it could help! Francisco Gómez Marín wrote: > Hi, > > I have bought an intel dot-station. It has an USB keyboard with a > touchpad on it. The keyboard works but the touchpad doesn't work with > a typic USB mouse configuration, nor in console (moused -p /dev/ums0 > -t auto) nor in X. > I have googled and searched in the archives of the list without success. > Is this type of touchpad supported? what can I do? > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > > --------------080105050308030107000200 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #1: Fri Aug 1 02:26:22 CEST 2003 root@devel:/usr/src/sys/i386/compile/AOL Preloaded elf kernel "/boot/kernel/kernel" at 0xc04a1000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04a1244. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 299092604 Hz CPU: Pentium II/Pentium II Xeon/Celeron (299.09-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 65798144 (62 MB) avail memory = 58859520 (56 MB) pnpbios: Bad PnP BIOS data checksum Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <MNTRAL MO81010A> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 7 entries at 0xc00f40c0 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 1 INTA is routed to irq 11 pcib0: slot 31 INTD is routed to irq 9 pcib0: slot 31 INTB is routed to irq 6 agp0: <Intel 82810 (i810 GMCH) SVGA controller> mem 0xffa80000-0xffafffff,0xf8000000-0xfbffffff irq 11 at device 1.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib1: slot 1 INTA is routed to irq 10 pcib1: slot 7 INTA is routed to irq 10 pcib1: slot 9 INTA is routed to irq 11 fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xdd80-0xddbf mem 0xff700000-0xff7fffff,0xff8ff000-0xff8fffff irq 10 at device 1.0 on pci1 fxp0: Ethernet address 00:03:47:3f:2e:55 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcm0: <AudioPCI ES1373-8> port 0xde80-0xdebf irq 10 at device 7.0 on pci1 pcm0: <Cirrus Logic CS4297A AC97 Codec> pci1: <simple comms> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH UDMA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 9 at device 31.2 on pci0 usb0: <Intel 82801AA (ICH) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 uhub1: 4 ports with 4 removable, self powered ukbd0: FORWARD USB Multimedia Keyboard, rev 1.10/1.01, addr 3, iclass 3/1 kbd0 at ukbd0 ums0: FORWARD USB Multimedia Keyboard, rev 1.10/1.01, addr 3, iclass 3/1 ums0: 3 buttons and Z dir. pci0: <serial bus, SMBus> at device 31.3 (no driver attached) orm0: <Option ROMs> at iomem 0xc8000-0xc8fff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec ad0: DMA limited to UDMA33, non-ATA66 cable or device ad0: 4126MB <ST34313A> [8944/15/63] at ata0-master UDMA33 Mounting root from ufs:/dev/ad0s1a --------------080105050308030107000200--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F26F5E5.2000905>