Date: Sat, 30 Jul 2022 12:59:23 +0200 From: Tomek CEDRO <tomek@cedro.info> To: Ralf Mardorf <ralf-mardorf@riseup.net> Cc: questions@freebsd.org Subject: Re: OT: Strange interaction between NIC, SSD and motherboard Message-ID: <CAFYkXj=UwVzHEzpK6TVifZYSX3msqb=LL3GVOGoHF9MEJ-hK%2BQ@mail.gmail.com> In-Reply-To: <20220730090027.0c5705ab@archlinux> References: <CAGBxaXny=SNkQt3oVL3RCaXcAWLKWxHD-mx=rUsjFtxX7ECAwg@mail.gmail.com> <9b92958b-0b67-0622-f5ec-b145fb8b569c@holgerdanske.com> <CAGBxaX=UyReMCJKzwh%2BqktjQZFTbvfVW4as=TGY9UezK%2ButC=A@mail.gmail.com> <20220730090027.0c5705ab@archlinux>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Jul 30, 2022 at 9:00 AM Ralf Mardorf wrote: > > On Sat, 30 Jul 2022 00:56:44 -0400, Aryeh Friedman wrote: > >I mean exactly that (it will not hold in a good cable... I also needed > >to replace the cable because it's clips had broken) > > Hi, > > If replacing the connector isn't an option, since it might be too time > consuming work to remove the mobo for soldering and/or soldering a > multi-layer board is too tricky or for any other reason, how about hot > glue? Replacing Thru-Hole connectors is not that hard and may be quick when you have Desolder Station with Vacuum Pump like this below for example.. I did remove 25+ pin connectors from various motherboards without even damaging them :-) :-) https://www.ebay.com/itm/385006950766 Also modern Non-Pb solder requires using flux paste to even move :-) I usually re-solder all points with Pb tin just to make them soft and then use vacuum de-solder station :-) -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAFYkXj=UwVzHEzpK6TVifZYSX3msqb=LL3GVOGoHF9MEJ-hK%2BQ>