From owner-svn-src-all@FreeBSD.ORG Sat Aug 11 22:20:29 2012 Return-Path: Delivered-To: svn-src-all@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 72DB11065672; Sat, 11 Aug 2012 22:20:29 +0000 (UTC) (envelope-from adrian@FreeBSD.org) Received: from svn.freebsd.org (svn.freebsd.org [IPv6:2001:4f8:fff6::2c]) by mx1.freebsd.org (Postfix) with ESMTP id 5C28C8FC15; Sat, 11 Aug 2012 22:20:29 +0000 (UTC) Received: from svn.freebsd.org (localhost [127.0.0.1]) by svn.freebsd.org (8.14.4/8.14.4) with ESMTP id q7BMKTpd005630; Sat, 11 Aug 2012 22:20:29 GMT (envelope-from adrian@svn.freebsd.org) Received: (from adrian@localhost) by svn.freebsd.org (8.14.4/8.14.4/Submit) id q7BMKTUH005627; Sat, 11 Aug 2012 22:20:29 GMT (envelope-from adrian@svn.freebsd.org) Message-Id: <201208112220.q7BMKTUH005627@svn.freebsd.org> From: Adrian Chadd Date: Sat, 11 Aug 2012 22:20:29 +0000 (UTC) To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org X-SVN-Group: head MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: Subject: svn commit: r239197 - head/sys/dev/ath X-BeenThere: svn-src-all@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "SVN commit messages for the entire src tree \(except for " user" and " projects" \)" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 11 Aug 2012 22:20:29 -0000 Author: adrian Date: Sat Aug 11 22:20:28 2012 New Revision: 239197 URL: http://svn.freebsd.org/changeset/base/239197 Log: Begin fleshing out the TX FIFO support. * Add ATH_TXQ_FIRST() for easy tasting of what's on the list; * Add an "axq_fifo_depth" for easy tracking of how deep the current FIFO is; * Flesh out the handoff (mcast, hw) functions; * Begin fleshing out a TX ISR proc, which tastes the TX status FIFO. The legacy hardware stuffs the TX completion at the end of the final frame descriptor (or final sub-frame when doing aggregate.) So it's feasible to do a per-TXQ drain and process, as the needed info is right there. For EDMA hardware, there's a separate TX completion FIFO. So the TX process routine needs to read the single FIFO and then process the frames in each hardware queue. This makes it difficult to do a per-queue process, as you'll end up with frames in the TX completion FIFO for a different TXQ to the one you've passed to ath_tx_draintxq() or ath_tx_processq(). Testing: I've tested the TX queue and TX completion code in hostap mode on an AR9380. Beacon frames successfully transmit and the completion routine is called. Occasional data frames end up in TXQ 1 and are also successfully completed. However, this requires some changes to the beacon code path as: * The AR9380 beacon configuration API is now in TU/8, rather than TU; * The AR9380 TX API requires the rate control is setup using a call to setup11nratescenario, rather than having the try0 series setup (rate/tries for the first series); so the beacon won't go out. I'll follow this up with commits to the beacon code. Modified: head/sys/dev/ath/if_ath_tx_edma.c head/sys/dev/ath/if_athvar.h Modified: head/sys/dev/ath/if_ath_tx_edma.c ============================================================================== --- head/sys/dev/ath/if_ath_tx_edma.c Sat Aug 11 20:24:39 2012 (r239196) +++ head/sys/dev/ath/if_ath_tx_edma.c Sat Aug 11 22:20:28 2012 (r239197) @@ -132,7 +132,7 @@ MALLOC_DECLARE(M_ATHDEV); /* * Re-initialise the DMA FIFO with the current contents of - * said FIFO. + * said TXQ. * * This should only be called as part of the chip reset path, as it * assumes the FIFO is currently empty. @@ -152,6 +152,90 @@ ath_edma_dma_restart(struct ath_softc *s } /* + * Hand off this frame to a hardware queue. + * + * Things are a bit hairy in the EDMA world. The TX FIFO is only + * 8 entries deep, so we need to keep track of exactly what we've + * pushed into the FIFO and what's just sitting in the TX queue, + * waiting to go out. + * + * So this is split into two halves - frames get appended to the + * TXQ; then a scheduler is called to push some frames into the + * actual TX FIFO. + */ +static void +ath_edma_xmit_handoff_hw(struct ath_softc *sc, struct ath_txq *txq, + struct ath_buf *bf) +{ + struct ath_hal *ah = sc->sc_ah; + + ATH_TXQ_LOCK_ASSERT(txq); + + KASSERT((bf->bf_flags & ATH_BUF_BUSY) == 0, + ("%s: busy status 0x%x", __func__, bf->bf_flags)); + + /* + * XXX TODO: write a hard-coded check to ensure that + * the queue id in the TX descriptor matches txq->axq_qnum. + */ + + /* Update aggr stats */ + if (bf->bf_state.bfs_aggr) + txq->axq_aggr_depth++; + + /* Push and update frame stats */ + ATH_TXQ_INSERT_TAIL(txq, bf, bf_list); + + /* Only schedule to the FIFO if there's space */ + if (txq->axq_fifo_depth < HAL_TXFIFO_DEPTH) { + ath_hal_puttxbuf(ah, txq->axq_qnum, bf->bf_daddr); + ath_hal_txstart(ah, txq->axq_qnum); + } +} + +/* + * Hand off this frame to a multicast software queue. + * + * Unlike legacy DMA, this doesn't chain together frames via the + * link pointer. Instead, they're just added to the queue. + * When it comes time to populate the CABQ, these frames should + * be individually pushed into the FIFO as appropriate. + * + * Yes, this does mean that I'll eventually have to flesh out some + * replacement code to handle populating the CABQ, rather than + * what's done in ath_beacon_generate(). It'll have to push each + * frame from the HW CABQ to the FIFO rather than just appending + * it to the existing TXQ and kicking off DMA. + */ +static void +ath_edma_xmit_handoff_mcast(struct ath_softc *sc, struct ath_txq *txq, + struct ath_buf *bf) +{ + + ATH_TXQ_LOCK_ASSERT(txq); + KASSERT((bf->bf_flags & ATH_BUF_BUSY) == 0, + ("%s: busy status 0x%x", __func__, bf->bf_flags)); + + /* + * XXX this is mostly duplicated in ath_tx_handoff_mcast(). + */ + if (ATH_TXQ_FIRST(txq) != NULL) { + struct ath_buf *bf_last = ATH_TXQ_LAST(txq, axq_q_s); + struct ieee80211_frame *wh; + + /* mark previous frame */ + wh = mtod(bf_last->bf_m, struct ieee80211_frame *); + wh->i_fc[1] |= IEEE80211_FC1_MORE_DATA; + + /* sync descriptor to memory */ + bus_dmamap_sync(sc->sc_dmat, bf_last->bf_dmamap, + BUS_DMASYNC_PREWRITE); + } + + ATH_TXQ_INSERT_TAIL(txq, bf, bf_list); +} + +/* * Handoff this frame to the hardware. * * For the multicast queue, this will treat it as a software queue @@ -173,17 +257,26 @@ ath_edma_xmit_handoff(struct ath_softc * struct ath_buf *bf) { + ATH_TXQ_LOCK_ASSERT(txq); + device_printf(sc->sc_dev, "%s: called; bf=%p, txq=%p, qnum=%d\n", __func__, bf, txq, txq->axq_qnum); + if (txq->axq_qnum == ATH_TXQ_SWQ) + ath_edma_xmit_handoff_mcast(sc, txq, bf); + else + ath_edma_xmit_handoff_hw(sc, txq, bf); + +#if 0 /* * XXX For now this is a placeholder; free the buffer * and inform the stack that the TX failed. */ ath_tx_default_comp(sc, bf, 1); +#endif } static int @@ -255,26 +348,73 @@ ath_edma_dma_txteardown(struct ath_softc return (0); } +/* + * Process frames in the current queue and if necessary, re-schedule the + * software TXQ scheduler for this TXQ. + * + * XXX This is again a pain in the ass to do because the status descriptor + * information is in the TX status FIFO, not with the current descriptor. + */ static int ath_edma_tx_processq(struct ath_softc *sc, struct ath_txq *txq, int dosched) { + device_printf(sc->sc_dev, "%s: called\n", __func__); return (0); } +/* + * Completely drain the TXQ, completing frames that were completed. + * + * XXX this is going to be a complete pain in the ass because the + * completion status is in the TX status FIFO, not with the descriptor + * itself. Sigh. + */ static void ath_edma_tx_draintxq(struct ath_softc *sc, struct ath_txq *txq) { + device_printf(sc->sc_dev, "%s: called\n", __func__); } +/* + * Process the TX status queue. + */ static void ath_edma_tx_proc(void *arg, int npending) { struct ath_softc *sc = (struct ath_softc *) arg; + struct ath_hal *ah = sc->sc_ah; + HAL_STATUS status; + struct ath_tx_status ts; + struct ath_txq *txq; device_printf(sc->sc_dev, "%s: called, npending=%d\n", __func__, npending); + + for (;;) { + ATH_TXSTATUS_LOCK(sc); + status = ath_hal_txprocdesc(ah, NULL, (void *) &ts); + ATH_TXSTATUS_UNLOCK(sc); + + if (status != HAL_OK) + break; + + /* + * At this point we have a valid status descriptor. + * The QID and descriptor ID (which currently isn't set) + * is part of the status. + * + * We then assume that the descriptor in question is the + * -head- of the given QID. Eventually we should verify + * this by using the descriptor ID. + */ + device_printf(sc->sc_dev, "%s: qcuid=%d\n", + __func__, + ts.ts_queue_id); + + txq = &sc->sc_txq[ts.ts_queue_id]; + } } static void Modified: head/sys/dev/ath/if_athvar.h ============================================================================== --- head/sys/dev/ath/if_athvar.h Sat Aug 11 20:24:39 2012 (r239196) +++ head/sys/dev/ath/if_athvar.h Sat Aug 11 22:20:28 2012 (r239197) @@ -304,6 +304,7 @@ struct ath_txq { #define ATH_TXQ_PUTPENDING 0x0001 /* ath_hal_puttxbuf pending */ u_int axq_depth; /* queue depth (stat only) */ u_int axq_aggr_depth; /* how many aggregates are queued */ + u_int axq_fifo_depth; /* depth of FIFO frames */ u_int axq_intrcnt; /* interrupt count */ u_int32_t *axq_link; /* link ptr in last TX desc */ TAILQ_HEAD(axq_q_s, ath_buf) axq_q; /* transmit queue */ @@ -344,6 +345,7 @@ struct ath_txq { TAILQ_REMOVE(&(_tq)->axq_q, _elm, _field); \ (_tq)->axq_depth--; \ } while (0) +#define ATH_TXQ_FIRST(_tq) TAILQ_FIRST(&(_tq)->axq_q) #define ATH_TXQ_LAST(_tq, _field) TAILQ_LAST(&(_tq)->axq_q, _field) struct ath_vap {