Date: Fri, 9 Aug 2002 14:28:53 -0500 From: "Eric Timme" <timothy@voidnet.com> To: <freebsd-stable@freebsd.org> Subject: recent kde problems (as of a 11am build) Message-ID: <004101c23fda$ffb35b40$6d00a8c0@rapture>
next in thread | raw e-mail | index | archive | help
This morning I reverted my kernel back to being more generic, modifying
only the processor type and adding ipfilter support for the most part,
and the entire
buildworld/buildkernel/installkernel/installworld/mergemaster process
went smoothly. While running mergemaster it prompted me to run the new
MAKEDEV script, which I did, followed by a reboot. As normal it entered
into KDM and prompted me to log in; however, whenever I try and log in
it halts at "Initializing system services.", and about 7 second later
the machine reboots on it's own. This lockup happens for both root and
my local user, and my mouse freezes along with my keyboard. Root's
~/.xsession-errors contains only "DCOPServer up and running", while my
normal user's reports:
fcntl: Bad file descriptor
fcntl: Bad file descriptor
DCOPServer up and running
Booting in with my older kernel luckily solves the problem, but only in
the short term. Could anyone make some general suggestions as to what
could be wrong? I'm going to re-cvsup and rebuild my kernel/world and
see if that automagically fixes things...we'll see. Thank goodness the
old kernel works =)
dmesg :
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-STABLE #1: Fri Aug 9 12:43:52 CDT 2002
timothy@repose:/usr/obj/usr/src/sys/Repose
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,MMX,FXSR>
real memory = 268435456 (262144K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 256036864 (250036K bytes)
Preloaded elf kernel "kernel" at 0xc050b000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc050b09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq
11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 7.3 on pci0
pci0: <S3 ViRGE DX/GX graphics accelerator> at 9.0 irq 11
ed0: <NE2000 PCI Ethernet (ProLAN)> port 0xe400-0xe41f irq 3 at device
13.0 on pci0
ed0: address 00:20:78:14:0e:02, type NE2000 (16 bit)
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sbc0: <Creative SB16/SB32> at port 0x220-0x22f,0x330-0x331,0x388-0x38b
irq 5 drq 1,5 on isa0
pcm0: <SB16 DSP 4.13> on sbc0
ata4: <Generic ESDI/IDE/ATA controller> at port 0x168-0x16f,0x36e-0x36f
irq 10 on isa0
IP Filter: v3.4.27 initialized. Default = block all, Logging = enabled
ad0: 4924MB <WDC AC35100L> [10672/15/63] at ata0-master UDMA33
ad2: DMA limited to UDMA33, non-ATA66 cable or device
ad2: 8063MB <WDC WD84AA> [16383/16/63] at ata1-master UDMA33
acd0: CDROM <MATSHITA CR-585> at ata1-slave PIO3
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
uname -a :
FreeBSD repose 4.6-STABLE FreeBSD 4.6-STABLE #1: Fri Aug 9 12:43:52 CDT
2002 timothy@repose:/usr/obj/usr/src/sys/Repose i386
P.S. the responses given to my earlier question about kdebase having
problems compiling were fixed when I forcibly rebuilt both qt and
kdebase as per suggestions, the former before the latter, and my
.xsession-errors when I boot in successfully seem to have about 6x as
many bad file descriptor messages *shrug*.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?004101c23fda$ffb35b40$6d00a8c0>