Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 2 Jun 2004 13:02:40 +0200
From:      Stefan Bethke <stb@lassitu.de>
To:        "Rob MacGregor" <freebsd.macgregor@blueyonder.co.uk>
Cc:        current@freebsd.org
Subject:   Re: 5.2.1 on EPIA M1000 board
Message-ID:  <5DA6ED00-B484-11D8-A02E-000A95C893E4@lassitu.de>
In-Reply-To: <200406012145.i51LjRLe006907@the-macgregors.org>
References:  <200406012145.i51LjRLe006907@the-macgregors.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Am 01.06.2004 um 23:45 schrieb Rob MacGregor:

> I see the same problem with 5.2 onwards (I haven't tried older parts of
> the 5.x series).  The board in question is a Via Eden board
> (http://www.lex.com.tw:8080/product/CV860A.htm).

I've been running various -current on exactly that system (with three 
RealTeks) with an older 10 GB 2.5" drive; haven't really running it off 
a CF card yet.

FWIW, here's a dmesg:

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights 
reserved.
FreeBSD 5.2-CURRENT #0: Sat Apr 10 17:19:01 CEST 2004
     root@diesel.lassitu.de:/usr/obj/usr/src/sys/DIESEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07ab000.
Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc07ab1cc.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc07ab280.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: VIA C3 Samuel 2 (532.64-MHz 686-class CPU)
   Origin = "CentaurHauls"  Id = 0x673  Stepping = 3
   Features=0x803035<FPU,DE,TSC,MSR,MTRR,PGE,MMX>
real memory  = 534708224 (509 MB)
avail memory = 517820416 (493 MB)
acpi0: <VIA601 AWRDACPI> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00fde40
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 
0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on 
acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 7 INTD is routed to irq 12
pcib0: slot 7 INTD is routed to irq 12
pcib0: slot 7 INTC is routed to irq 11
pcib0: slot 8 INTA is routed to irq 12
pcib0: slot 9 INTA is routed to irq 10
pcib0: slot 11 INTA is routed to irq 11
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at 
device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xc000-0xc00f at device 
7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 12 at device 
7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ulpt0: EPSON USB2.0 MFP, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
umass0: EPSON USB2.0 MFP, rev 2.00/1.00, addr 2
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 12 at device 
7.3 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ugen0: Atmel BW002 Wireless adapter, rev 1.10/1.00, addr 2
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
pcm0: <VIA VT82C686A> port 0xd400-0xd403,0xd000-0xd003,0xcc00-0xccff 
irq 11 at device 7.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC200 AC97 Codec>
rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem 
0xe5810000-0xe58100ff irq 12 at device 8.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:40:f4:67:ec:84
rl0: [GIANT-LOCKED]
rl1: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem 
0xe5811000-0xe58110ff irq 10 at device 9.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: Ethernet address: 00:40:f4:67:ec:83
rl1: [GIANT-LOCKED]
rl2: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem 
0xe5812000-0xe58120ff irq 11 at device 11.0 on pci0
miibus2: <MII bus> on rl2
rlphy2: <RealTek internal media interface> on miibus2
rlphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl2: Ethernet address: 00:40:f4:67:ec:82
rl2: [GIANT-LOCKED]
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
cpu0 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on 
isa0
Timecounter "TSC" frequency 532639851 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, 
default to accept, logging disabled
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad2: 9590MB <IBM-DJSA-210> [19485/16/63] at ata1-master UDMA66
Mounting root from ufs:/dev/ad2s1a


-- 
Stefan Bethke <stb@lassitu.de>   Fon +49 170 346 0140



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5DA6ED00-B484-11D8-A02E-000A95C893E4>