Date: Fri, 9 Dec 2005 15:38:53 +0300 From: huge@nm.ru To: freebsd-acpi@freebsd.org Subject: toshiba portege r100 doesn't resume from S3 Message-ID: <1287807936.20051209153853@nm.ru>
next in thread | raw e-mail | index | archive | help
Hi! I have a problem. Would you help me?
My Toshiba Portege R100 doesn't resume from S3.
There is a problem with disk access after resume. It looks the same if I did
"atacontrol detach ata0". And that's interesting: ad0 is
detached but error messages are successfully logged.
[from dmesg]
..........
acpi_button0: run_prep cleaned up for \\_SB_.PWRB
acpi_lid0: run_prep cleaned up for \\_SB_.LID_
acpi: suspend request ignored (not ready yet)
cbb0: [MPSAFE]
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=80 ostat1=80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x50 err=0x00 lsb=0xfe msb=0x3f
ata0: stat1=0x00 err=0x00 lsb=0xfe msb=0x3f
ata0: reset tp2 stat0=50 stat1=00 devices=0x0
--> ad0: detached
ata0: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: reinit done ..
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
battery1: battery initialization start
--> g_vfs_done():ad0s1a[READ(offset=277413888, length=2560)]error = 6
vnode_pager_getpages: I/O read error
--> g_vfs_done():ad0s1a[READ(offset=268517376, length=12800)]error = 6
vnode_pager_getpages: I/O read error
--> g_vfs_done():ad0s1e[WRITE(offset=6144000, length=2048)]error = 6
--> g_vfs_done():ad0s1e[WRITE(offset=65536, length=2048)]error = 6
panic: vinvalbuf: dirty bufs
Uptime: 33m47s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Rebooting...
.........
And there is another problem. Video doesn't work after resume.
With hw.acpi.reset_video=1 display is just off, with 0 it shows
multicolored vertical lines.
The DSDT seems to be ok since it's recompiled without errors and the
same machine successfully resumes from S3 under linux.
# dmesg
http://media-trest.ru/r100/dmesg-v
# sysctl hw.acpi
http://media-trest.ru/r100/sysctl
ASL
http://media-trest.ru/r100/toshiba-portege-r100.asl
Thanks!
Alexandre Scherbanov
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1287807936.20051209153853>