From owner-freebsd-arm@FreeBSD.ORG Wed Jan 29 18:39:31 2014 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id DED22E13 for ; Wed, 29 Jan 2014 18:39:31 +0000 (UTC) Received: from mail.nomadlogic.org (mail.nomadlogic.org [IPv6:2607:f2f8:a098::4]) (using TLSv1 with cipher ADH-CAMELLIA256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id C441E1851 for ; Wed, 29 Jan 2014 18:39:31 +0000 (UTC) Received: from mail.nomadlogic.org (localhost [127.0.0.1]) (using TLSv1 with cipher ADH-CAMELLIA256-SHA (256/256 bits)) (No client certificate requested) by mail.nomadlogic.org (Postfix) with ESMTPS id 61560125EC6 for ; Wed, 29 Jan 2014 10:39:31 -0800 (PST) Received: from pop.rubicorp.com (unknown [72.34.113.100]) (using TLSv1 with cipher DHE-RSA-CAMELLIA256-SHA (256/256 bits)) (No client certificate requested) by mail.nomadlogic.org (Postfix) with ESMTPSA id 58E6A125EB2 for ; Wed, 29 Jan 2014 10:39:31 -0800 (PST) Message-ID: <52E94AE3.5080404@nomadlogic.org> Date: Wed, 29 Jan 2014 10:39:31 -0800 From: Pete Wright User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:24.0) Gecko/20100101 Thunderbird/24.2.0 MIME-Version: 1.0 To: freebsd-arm@freebsd.org Subject: Utilite Freescale i.MX6 support Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: "Porting FreeBSD to ARM processors." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 29 Jan 2014 18:39:31 -0000 Hello, I have recently purchase this device and am interested in trying to get FreeBSD running on it: http://utilite-computer.com/web/utilite-models I currently have the system booting fine with the provided Debian image they ship with these system. At the end of this message is the output of dmesg from linux-land. Helpful documentation is also available here: http://utilite-computer.com/download/documentation//utilite/utilite-technical-reference-manual.pdf >From what I can tell Utilite has done a good job at being open about their spec's and components. Hopefully this will help get it ported. I am personally excited about the dual Intel GBE NIC's on this system and would love to test this box out as an embedded router/firewall/nat device. Is there a good reference I can start from for this chipset? I am not %100 clear on which guide I should be following. Thanks in advance! -pete utilite@utilite-desktop:~$ dmesg Linux version 3.0.35-cm-fx6-5.1 (val@devel) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #232 SMP Wed Dec 11 10:51:48 IST 2013 CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: Compulab CM-FX6 Memory policy: ECC disabled, Data cache writealloc CPU identified as i.MX6Q, silicon rev 1.2 On node 0 totalpages: 507904 free_area_init_node: node 0, pgdat c0792960, node_mem_map cb800000 DMA zone: 368 pages used for memmap DMA zone: 0 pages reserved DMA zone: 46736 pages, LIFO batch:15 Normal zone: 976 pages used for memmap Normal zone: 123952 pages, LIFO batch:31 HighMem zone: 4288 pages used for memmap HighMem zone: 331584 pages, LIFO batch:31 PERCPU: Embedded 7 pages/cpu @cce11000 s5280 r8192 d15200 u32768 pcpu-alloc: s5280 r8192 d15200 u32768 alloc=8*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 502272 Kernel command line: console=ttymxc3,115200 root=/dev/sda2 rw rootwait PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 960MB 1024MB = 1984MB total Memory: 2006072k/2006072k available, 91080k reserved, 1343488K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xf4600000 - 0xffe00000 ( 184 MB) vmalloc : 0xea800000 - 0xf2000000 ( 120 MB) lowmem : 0xc0000000 - 0xea000000 ( 672 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .init : 0xc0008000 - 0xc0043000 ( 236 kB) .text : 0xc0043000 - 0xc0735438 (7114 kB) .data : 0xc0736000 - 0xc07939e0 ( 375 kB) .bss : 0xc0793a04 - 0xc07fbb00 ( 417 kB) Hierarchical RCU implementation. RCU dyntick-idle grace-period acceleration is enabled. NR_IRQS:624 MXC GPIO hardware sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms arm_max_freq=1GHz MXC_Early serial console at MMIO 0x21f0000 (options '115200') bootconsole [ttymxc3] enabled Console: colour dummy device 80x30 Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available CPU1: Booted secondary processor CPU2: Booted secondary processor CPU3: Booted secondary processor Brought up 4 CPUs SMP: Total of 4 processors activated (6324.22 BogoMIPS). devtmpfs: initialized print_constraints: dummy: NET: Registered protocol family 16 print_constraints: vddpu: 725 <--> 1300 mV at 1150 mV fast normal print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal cpu regulator mode:ldo_enable hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step. hw-breakpoint: maximum watchpoint size is 4 bytes. L310 cache controller enabled l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x02070000, Cache size: 1048576 B bio: create slab at 0 mxs-dma mxs-dma-apbh: initialized print_constraints: ads7846_vcc: 3300 mV print_constraints: vmmc: 3300 mV vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. spi_imx imx6q-ecspi.0: probed spi_imx imx6q-ecspi.1: probed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Freescale USB OTG Driver loaded, $Revision: 1.55 $ imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) imx-ipuv3 imx-ipuv3.1: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) Advanced Linux Sound Architecture Driver Version 1.0.24. Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource mxc_timer1 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 32 _regulator_get: etb supply vcore not found, using dummy regulator _regulator_get: etm.0 supply vcore not found, using dummy regulator _regulator_get: etm.1 supply vcore not found, using dummy regulator _regulator_get: etm.2 supply vcore not found, using dummy regulator _regulator_get: etm.3 supply vcore not found, using dummy regulator Static Power Management for Freescale i.MX6 wait mode is enabled for i.MX6 cpaddr = ea880000 suspend_iram_base=ea8f0000 PM driver module loaded IMX usb wakeup probe the wakeup pdata is 0xe9cd7920 add wake up source irq 75 IMX usb wakeup probe the wakeup pdata is 0xe9cd76e0 i.MXC CPU frequency driver highmem bounce pool size: 64 pages JFFS2 version 2.2. (NAND) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc. msgmni has been set to 1294 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) imx-sdma imx-sdma: loaded firmware 1.1 imx-sdma imx-sdma: initialized Serial: IMX driver imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX imx-uart.3: ttymxc3 at MMIO 0x21f0000 (irq = 61) is a IMX console [ttymxc3] enabled, bootconsole disabled imx-uart.1: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX imx-uart.4: ttymxc4 at MMIO 0x21f4000 (irq = 62) is a IMX brd: module loaded loop: module loaded at24 2-0050: 256 byte at24 EEPROM, writable, 16 bytes/write ahci: SSS flag set, parallel bus scan disabled ahci ahci.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode ahci ahci.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst scsi0 : ahci_platform ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02200fff] port 0x100 irq 71 m25p80 spi0.0: found sst25vf016b, expected m25p80 m25p80 spi0.0: sst25vf016b (2048 Kbytes) Creating 3 MTD partitions on "spi_flash": 0x000000000000-0x0000000c0000 : "uboot" 0x0000000c0000-0x000000100000 : "uboot environment" 0x000000100000-0x000000200000 : "reserved" No NAND device found. Chip scan failed GPMI NAND driver registered. (IMX) vcan: Virtual CAN interface driver CAN device driver interface flexcan netdevice driver flexcan imx6q-flexcan.0: device registered (reg_base=ea9b0000, irq=142) FEC Ethernet Driver fec_enet_mii_bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected add wake up source irq 72 fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200 fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usbcore: registered new interface driver cdc_wdm Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ARC USBOTG Device Controller driver (1 August 2005) mousedev: PS/2 mouse device common for all mice =======snvs_pwrkey_probe() lp_cr 0x0 =======snvs_pwrkey_probe() lp_cr 0x20 input: snvs_power_key as /devices/virtual/input/input0 i.MX6 powerkey probe i2c-core: driver [isl29023] using legacy suspend method i2c-core: driver [isl29023] using legacy resume method i2c /dev entries driver at24 3-0050: 256 byte at24 EEPROM, writable, 16 bytes/write CM-FX6: Detected SB-FX6m (Utilite) base board rtc-em3027 3-0056: rtc core: registered rtc-em3027 as rtc0 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-9: SanDisk SSD U100 32GB, 10.56.00, max UDMA/133 ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SanDisk SSD U100 10.5 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk IMX PCIe port: link up. pci 0000:00:00.0: [16c3:abcd] type 1 class 0x000604 pci 0000:00:00.0: reg 10: [mem 0x00000000-0x000fffff 64bit pref] pci 0000:00:00.0: reg 38: [mem 0x00000000-0x0000ffff pref] pci 0000:00:00.0: supports D1 pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold pci 0000:00:00.0: PME# disabled PCI: bus0: Fast back to back transfers disabled pci 0000:01:00.0: [8086:1539] type 0 class 0x000200 pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0001ffff] pci 0000:01:00.0: reg 18: [io 0x0000-0x001f] pci 0000:01:00.0: reg 1c: [mem 0x00000000-0x00003fff] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled PCI: bus1: Fast back to back transfers disabled PCI: Device 0000:00:00.0 not available because of resource collisions pcieport: probe of 0000:00:00.0 failed with error -22 pci 0000:00:00.0: BAR 0: assigned [mem 0x01100000-0x011fffff 64bit pref] pci 0000:00:00.0: BAR 0: set to [mem 0x01100000-0x011fffff 64bit pref] (PCI address [0x1100000-0x11fffff]) pci 0000:00:00.0: BAR 8: assigned [mem 0x01200000-0x012fffff] pci 0000:00:00.0: BAR 6: assigned [mem 0x01300000-0x0130ffff pref] pci 0000:00:00.0: BAR 7: assigned [io 0x1000000-0x1000fff] pci 0000:01:00.0: BAR 0: assigned [mem 0x01200000-0x0121ffff] pci 0000:01:00.0: BAR 0: set to [mem 0x01200000-0x0121ffff] (PCI address [0x1200000-0x121ffff]) pci 0000:01:00.0: BAR 3: assigned [mem 0x01220000-0x01223fff] usb 2-1: new high speed USB device number 2 using fsl-ehci pci 0000:01:00.0: BAR 3: set to [mem 0x01220000-0x01223fff] (PCI address [0x1220000-0x1223fff]) pci 0000:01:00.0: BAR 2: assigned [io 0x1000000-0x100001f] pci 0000:01:00.0: BAR 2: set to [io 0x1000000-0x100001f] (PCI address [0x1000000-0x100001f]) pci 0000:00:00.0: PCI bridge to [bus 01-01] pci 0000:00:00.0: bridge window [io 0x1000000-0x1000fff] pci 0000:00:00.0: bridge window [mem 0x01200000-0x012fffff] pci 0000:00:00.0: bridge window [mem pref disabled] i2c i2c-0: Added multiplexed i2c bus 3 i2c i2c-0: Added multiplexed i2c bus 4 gpio-i2cmux gpio-i2cmux: 2 port mux on imx-i2c adapter Linux media interface: v0.10 lirc_dev: IR Remote Control driver registered, major 251 IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR RC5 (streamzap) protocol handler initialized IR LIRC bridge handler initialized Linux video capture interface: v2.00 imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1) sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mmc0: SDHCI controller on platform [sdhci-esdhc-imx.0] using DMA mmc1: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA VPU initialized mxc_asrc registered hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected Thermal calibration data is 0x59d4f469 Thermal sensor with ratio = 187 Anatop Thermal registered as thermal_zone0 anatop_thermal_probe: default cooling device is cpufreq! Registered led device: cm_fx6:green mmc0: new high speed SDIO card at address 0001 caam caam.0: device ID = 0x0a16010000000000 caam caam.0: job rings = 2, qi = 0 alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam) caam caam.0: authenc-hmac-md5-cbc-aes-caam alg: No test for authenc(hmac(sha1),cbc(aes)) (authenc-hmac-sha1-cbc-aes-caam) caam caam.0: authenc-hmac-sha1-cbc-aes-caam alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam) caam caam.0: authenc-hmac-sha224-cbc-aes-caam alg: No test for authenc(hmac(sha256),cbc(aes)) (authenc-hmac-sha256-cbc-aes-caam) caam caam.0: authenc-hmac-sha256-cbc-aes-caam alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam) caam caam.0: authenc-hmac-md5-cbc-des3_ede-caam alg: No test for authenc(hmac(sha1),cbc(des3_ede)) (authenc-hmac-sha1-cbc-des3_ede-caam) caam caam.0: authenc-hmac-sha1-cbc-des3_ede-caam alg: No test for authenc(hmac(sha224),cbc(des3_ede)) (authenc-hmac-sha224-cbc-des3_ede-caam) caam caam.0: authenc-hmac-sha224-cbc-des3_ede-caam alg: No test for authenc(hmac(sha256),cbc(des3_ede)) (authenc-hmac-sha256-cbc-des3_ede-caam) caam caam.0: authenc-hmac-sha256-cbc-des3_ede-caam alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam) caam caam.0: authenc-hmac-md5-cbc-des-caam alg: No test for authenc(hmac(sha1),cbc(des)) (authenc-hmac-sha1-cbc-des-caam) caam caam.0: authenc-hmac-sha1-cbc-des-caam alg: No test for authenc(hmac(sha224),cbc(des)) (authenc-hmac-sha224-cbc-des-caam) caam caam.0: authenc-hmac-sha224-cbc-des-caam alg: No test for authenc(hmac(sha256),cbc(des)) (authenc-hmac-sha256-cbc-des-caam) caam caam.0: authenc-hmac-sha256-cbc-des-caam caam caam.0: cbc-aes-caam caam caam.0: cbc-3des-caam caam caam.0: cbc-des-caam USB Host suspend begins will suspend roothub and its children ehci_fsl_bus_suspend begins, DR ehci_fsl_bus_suspend ends, DR host suspend ends platform caam_jr.0: registering rng-caam usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbcore: registered new interface driver snd-usb-audio mxc_spdif mxc_spdif.0: MXC SPDIF Audio _regulator_get: 2-001a supply AVDD not found, using dummy regulator _regulator_get: 2-001a supply HPVDD not found, using dummy regulator _regulator_get: 2-001a supply DCVDD not found, using dummy regulator _regulator_get: 2-001a supply DBVDD not found, using dummy regulator imx_wm8731_init: success asoc: wm8731-hifi <-> imx-ssi.1 mapping ok asoc: mxc-spdif <-> imx-spdif-dai.0 mapping ok ALSA device list: #0: wm8731-audio #1: imx-spdif NET: Registered protocol family 26 TCP cubic registered NET: Registered protocol family 17 can: controller area network core (rev 20090105 abi 8) NET: Registered protocol family 29 can: raw protocol (rev 20090105) can: broadcast manager protocol (rev 20090105 t) Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' lib80211_crypt: registered algorithm 'WEP' lib80211_crypt: registered algorithm 'CCMP' lib80211_crypt: registered algorithm 'TKIP' HDMI CEC initialized mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1 imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7) Console: switching to colour frame buffer device 240x67 mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver dvi _regulator_get: get() with no identifier mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio asoc: mxc-hdmi-soc <-> imx-hdmi-soc-dai.0 mapping ok VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 Bus freq driver module loaded Bus freq driver Enabled mxc_dvfs_core_probe DVFS driver module loaded regulator_init_complete: ads7846_vcc: incomplete constraints, leaving on rtc-em3027 3-0056: setting system clock to 1990-04-28 03:36:03 UTC (641273763) EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240) EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (244) EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1335206 EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1317445 EXT4-fs (sda2): 2 orphan inodes deleted EXT4-fs (sda2): recovery complete EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 8:2. devtmpfs: mounted Freeing init memory: 236K Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udevd[1452]: starting version 175 Intel(R) Gigabit Ethernet Network Driver - version 4.1.2 Copyright (c) 2007-2012 Intel Corporation. PCI: enabling device 0000:01:00.0 (0140 -> 0142) igb: 0000:01:00.0: igb_check_options: VMDq option is not supported. igb 0000:01:00.0: Failed to initialize MSI-X interrupts. Falling back to MSI interrupts. igb 0000:01:00.0: Failed to initialize MSI interrupts. Falling back to legacy interrupts. igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection igb 0000:01:00.0: eth1: (PCIe:2.5GT/s:Width x1) igb 0000:01:00.0: eth1: MAC: 00:01:c0:14:54:57 igb 0000:01:00.0: eth1: PBA No: FFFFFF-0FF igb 0000:01:00.0: LRO is disabled igb 0000:01:00.0: Using legacy interrupts. 1 rx queue(s), 1 tx queue(s) ads7846 spi0.1: touchscreen, irq 303 input: ADS7846 Touchscreen as /devices/platform/imx6q-ecspi.0/spi_master/spi0/spi0.1/input/input1 Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2 ehci_fsl_bus_suspend begins, Host 1 ehci_fsl_bus_suspend ends, Host 1 init: failsafe main process (2186) killed by TERM signal mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW download mwifiex_sdio mmc0:0001:1: WLAN FW is active mwifiex_sdio mmc0:0001:1: info: successfully registered wiphy device init: alsa-restore main process (2888) terminated with status 99 init: plymouth-stop pre-start process (2979) terminated with status 1 vgaarb: this pci device is not a vga device vgaarb: this pci device is not a vga device [drm] Initialized drm 1.1.0 20060810 [drm] Initialized vivante 1.0.0 20120216 on minor 0 mwifiex_sdio mmc0:0001:1: info: mlan0: Marvell 802.11 Adapter mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (14.57.5.p44) eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1) ieee80211 phy0: info: ignoring the timeout value for IEEE power save ieee80211 phy0: info: received scan request on mlan0 ieee80211 phy0: info: ignoring the timeout value for IEEE power save ehci_fsl_bus_resume begins, Host 1 ehci_fsl_bus_resume ends, Host 1 ehci_fsl_bus_resume begins, DR warning: process `colord' used the deprecated sysctl system call with 8.1.2. mwifiex_sdio mmc0:0001:1: info: mwifiex_cfg80211_results: sending scan results ehci_fsl_bus_suspend begins, Host 1 ehci_fsl_bus_suspend ends, Host 1 ieee80211 phy0: info: received scan request on mlan0 mwifiex_sdio mmc0:0001:1: info: mwifiex_cfg80211_results: sending scan results ieee80211 phy0: info: received scan request on mlan0 mwifiex_sdio mmc0:0001:1: info: mwifiex_cfg80211_results: sending scan results ieee80211 phy0: info: received scan request on mlan0 mwifiex_sdio mmc0:0001:1: info: mwifiex_cfg80211_results: sending scan results ieee80211 phy0: info: received scan request on mlan0 mwifiex_sdio mmc0:0001:1: info: mwifiex_cfg80211_results: sending scan results ieee80211 phy0: info: received scan request on mlan0 mwifiex_sdio mmc0:0001:1: info: mwifiex_cfg80211_results: sending scan results ieee80211 phy0: info: received scan request on mlan0 mwifiex_sdio mmc0:0001:1: info: mwifiex_cfg80211_results: sending scan results ieee80211 phy0: info: received scan request on mlan0 mwifiex_sdio mmc0:0001:1: info: mwifiex_cfg80211_results: sending scan results -- Pete Wright pete@nomadlogic.org twitter => @nomadlogicLA