Date: Wed, 26 Nov 2014 16:51:52 +1030 From: Shane Ambler <FreeBSD@ShaneWare.Biz> To: freebsd-testing@freebsd.org Subject: Testing 10.1 WITH_TESTS Message-ID: <54757180.7020702@ShaneWare.Biz>
next in thread | raw e-mail | index | archive | help
First sent to freebsd-stable but freebsd-testing was suggested. Hi there, I currently have two machines running with 10.1 that have been built having WITH_TESTS enabled and kyua installed. Both machines have 3 disks in a raidz zpool. The older machine is a pentium E2140 with 1GB ram and runs through all tests without trouble. My main machine is a corei5 with 8GB ram and does have trouble passing all tests. The local/kyua/integration tests fail to finish, the first run I was getting errors of maxproc limit exceeded, after increasing that to 25,000 I watched top display a process count of between 16,000 and 20,000 depending on the test and all free ram being used up, I saw several outputs like - broken: Test case body timed out [3300.0s], I saw one say failed due to an exception but as I cancelled after 6 hours it didn't save the test results. Test results can be found at http://shaneware.biz/kyua-tests/ (kyua/integration test disabled for the corei5) which also has a copy of src.conf and dmesg.boot as well as /var/log/messages content during tests as there are several entries of test processes exiting on signals 3, 6, 10 and 11 even though the tests pass. It was mentioned that the failing yacc tests have been fixed and the atf-macro tests were removed in stable/10. The tests within local/kyua/integration that fail are cmd_report_junit_test cmd_report_test cmd_test_test -- FreeBSD - the place to B...Software Developing Shane Ambler
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?54757180.7020702>