Date: Fri, 21 Mar 1997 19:04:24 -0600 (CST) From: Alec Kloss <alec@d2si.com> To: freebsd-questions@freebsd.org Subject: 2.2-Release and Teac CD-56s drive Message-ID: <199703220104.TAA00503@d2si.com>
next in thread | raw e-mail | index | archive | help
Hello all. I just upgraded from 2.1.6 to 2.2 and the Teac CD-56s cd-rom drive I have is no longer working. It worked out of the box with 2.1.6 (under the generic kernel and under a custom built one. Here are the messages (lines wrapped)relating to the Adaptec 3940 card I use: Mar 21 18:37:48 macbeth /kernel: ahc0 <Adaptec 3940 Ultra SCSI host adapter> rev 0 int a irq 5 on pci1:4 Mar 21 18:37:48 macbeth /kernel: ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs Mar 21 18:37:48 macbeth /kernel: ahc0 waiting for scsi devices to settle Mar 21 18:37:48 macbeth /kernel: ahc0: target 0 Tagged Queuing Device Mar 21 18:37:48 macbeth /kernel: (ahc0:0:0): "Quantum XP34300W L912" type 0 fixed SCSI 2 Mar 21 18:37:48 macbeth /kernel: sd0(ahc0:0:0): Direct-Access 4101MB (8399520 512 byte sectors) Mar 21 18:37:48 macbeth /kernel: ahc0: target 1 Tagged Queuing Device Mar 21 18:37:48 macbeth /kernel: (ahc0:1:0): "QUANTUM XP34550W LXQ1" type 0 fixed SCSI 2 Mar 21 18:37:48 macbeth /kernel: sd1(ahc0:1:0): Direct-Access 4341MB (8890760 512 byte sectors) Mar 21 18:37:48 macbeth /kernel: ahc1 <Adaptec 3940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci1:5 Mar 21 18:37:48 macbeth /kernel: ahc1: aic7880 Wide Channel B, SCSI Id=7, 16/255 SCBs Mar 21 18:37:48 macbeth /kernel: ahc1 waiting for scsi devices to settle Mar 21 18:37:48 macbeth /kernel: (ahc1:3:0): Unexpected busfree. LASTPHASE == 0xa0 Mar 21 18:37:48 macbeth /kernel: (ahc1:3:0): Unexpected busfree. LASTPHASE == 0xa0 Mar 21 18:37:48 macbeth /kernel: ahc1:A:4: refuses WIDE negotiation. Using 8bit transfers Mar 21 18:37:48 macbeth /kernel: ahc1: target 4 Tagged Queuing Device Mar 21 18:37:48 macbeth /kernel: (ahc1:4:0): "iomega jaz 1GB G.60" type 0 removable SCSI 2 Mar 21 18:37:48 macbeth /kernel: sd2(ahc1:4:0): Direct-Access Mar 21 18:37:48 macbeth /kernel: sd2(ahc1:4:0): ILLEGAL REQUEST asc:24,0 Invalid field in CDB Mar 21 18:37:48 macbeth /kernel: sd2 could not mode sense (4). Using ficticious geometry Mar 21 18:37:48 macbeth /kernel: 1021MB (2091050 512 byte sectors) As you can see, I get "Unexpected busfree" when it is scanning the LUN the cd-rom drive is on. Any suggestions?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199703220104.TAA00503>