From owner-freebsd-scsi Thu Sep 24 23:55:10 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id XAA10066 for freebsd-scsi-outgoing; Thu, 24 Sep 1998 23:55:10 -0700 (PDT) (envelope-from owner-freebsd-scsi@FreeBSD.ORG) Received: from magnet.geophysik.tu-freiberg.de (magnet.geophysik.tu-freiberg.de [139.20.128.6]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id XAA09963 for ; Thu, 24 Sep 1998 23:54:38 -0700 (PDT) (envelope-from freebsd@magnet.geophysik.tu-freiberg.de) Received: (from freebsd@localhost) by magnet.geophysik.tu-freiberg.de (8.9.1/8.7.3) id IAA00398 for freebsd-scsi@freebsd.org; Fri, 25 Sep 1998 08:54:19 +0200 (CEST) From: Holm Tiffe Message-Id: <199809250654.IAA00398@magnet.geophysik.tu-freiberg.de> Subject: AHA 2742T+CAM+SMP problems 2nd. try To: freebsd-scsi@FreeBSD.ORG Date: Fri, 25 Sep 1998 08:54:19 +0200 (CEST) Reply-To: freebsd@magnet.geophysik.tu-freiberg.de X-Mailer: ELM [version 2.4ME+ PL26 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, this is the 2nd try to get a ligth on tis prob. 1. my system is an freebsd-current-aout from 3 days ago. 2. the Motherboard is aN ASUS PCI/E P54NP4 Dual P5/100 board 3. both Processors are now P5/100 Mask SX963. 4. the SCSI Controller is an Adaptec AHA 2742T Rev. C 5. the system is running stable for years. 6. the system boots properly in Uniprocessor mode, dmesg: Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-BETA #6: Tue Sep 22 23:57:59 MET DST 1998 root@unicorn.pppnet.tu-freiberg.de:/usr/src/sys/compile/UNICORN Timecounter "i8254" frequency 1193175 Hz cost 3575 ns Timecounter "TSC" frequency 99998845 Hz cost 229 ns CPU: Pentium/P54C (100.00-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping=5 Features=0x3bf real memory = 67108864 (65536K bytes) avail memory = 62869504 (61396K bytes) DEVFS: ready for devices eisa0: Probing for devices on the EISA bus ahc0: at 0x1c00-0x1cff irq 11 on eisa0 slot 1 ahc0: aic7770 <= Rev C, Twin Channel, A SCSI Id=7, B SCSI Id=7, 4/255 SCBs Probing for devices on PCI bus 0: chip0: rev 0x11 on pci0.0. 0 chip1: rev 0x04 on pci0.2.0 vga0: rev 0x00 int a irq 9 on pci0.5.0 de0: rev 0x23 int a irq 10 on pci0.6.0 de0: Cogent 21040 [10Mb/s] pass 2.3 de0: address 00:00:92:90:09:8d Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16450 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 dgb0: PC/Xe 64K dgb0 at 0x300-0x303 maddr 0xd0000 msize 65536 on isa dgb0: 8 ports lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in fd1: 1.2MB 5.25in npx0 on motherboard npx0: INT 16 interface de0: enabling AUI/BNC port Intel Pentium F00F detected, installing workaround DEVFS: ready to run (probe9:ahc0:1:2:0): Sending SDTR!! sa0 at ahc0 bus 1 target 3 lun 0 sa0: Removable Sequential Access SCSI2 device sa0: 4.464MB/s transfers (4.464MHz, offset 8) da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI1 device da0: 3.676MB/s transfers (3.676MHz, offset 8) da0: 203MB (415872 512 byte sectors: 64H 32S/T 203C) da1 at ahc0 bus 0 target 2 lun 0 da1: Fixed Direct Access SCSI2 device da1: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled da1: 2048MB (4194304 512 byte sectors: 64H 32S/T 2048C) da2 at ahc0 bus 1 target 2 lun 0 da2: Fixed Direct Access SCSI2 device da2: 10.0MB/s transfers (10.0MHz, offset 8), Tagged Queueing Enabled da2: 1910MB (3912172 512 byte sectors: 64H 32S/T 1910C) changing root device to da1s1a cd0 at ahc0 bus 0 target 4 lun 0 cd0: Removable CD-ROM SCSI2 device cd0: 4.32MB/s transfers (4.32MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present (da1:ahc0:0:2:0): tagged openings now 33 (da1:ahc0:0:2:0): tagged openings now 32 (da1:ahc0:0:2:0): tagged openings now 31 here comes the mptable output: MPTable, version 2.0.15 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f8360 signature: '_MP_' length: 16 bytes version: 1.1 checksum: 0x9d mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f8374 signature: 'PCMP' base table length: 228 version: 1.1 checksum: 0x51 OEM ID: 'ASUSTEK0' Product ID: 'P54NP4000000' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 20 local APIC address: 0xfee00000 extended table length: 0 extended table checksum: 0 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x11 BSP, usable 5 2 1 0x07bf 1 0x11 AP, usable 5 2 1 0x07bf -- Bus: Bus ID Type 0 EISA 1 PCI -- I/O APICs: APIC ID Version State Address 2 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# INT conforms conforms 0 1 2 1 INT conforms conforms 0 0 2 2 INT conforms conforms 0 3 2 3 INT conforms conforms 0 4 2 4 INT conforms conforms 0 5 2 5 INT conforms conforms 0 6 2 6 INT conforms conforms 0 7 2 7 INT conforms conforms 0 8 2 8 INT conforms conforms 0 9 2 9 INT conforms conforms 0 10 2 10 INT conforms conforms 0 11 2 11 INT conforms conforms 0 12 2 12 INT conforms conforms 0 13 2 13 INT conforms conforms 0 14 2 14 INT conforms conforms 0 15 2 15 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ------------------------------------------------------------------------------- # SMP kernel config file options: # Required: options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Optional (built-in defaults will work in most cases): #options NCPU=2 # number of CPUs #options NBUS=2 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs the devfs is configured in the kernel but not mounted. 7. when I boot up the SMP kernel the system hangs after the line SMP: AP CPU #1 Launched! after ca. 1,5 minutes I get: (typed from the display by hand, maybe these a bit incorrect) (probe9:ahc0:1:2:0): sending SDTR!! (probe9:ahc0:1:2:0): SCB 0x09 timed out in message phasem SCSISIGI == 0xe6 SEQADDR == 0xdc SSTAT1 == 0x03 (some line with Bus Device Reset) (probe9:ahc0:1:2:0) BDR message in message buffer Bus Device Reset Message sent ahc0: Bus Device Reset on B:2 1 SCBs aborted than comes the same on Channel A for every possible TARGET+LUN nothing other happens, the machine loops there. .. sorry cold'nt write down this better, must manage to get a 2nd. computer to cut this from a serial console.... The problem only occurs with the SMP kernel, in UP mode the machine boots up successfully. Can please anyone enlighten me where I have to look to find the bug ? Here comes the kernel config file from the SMP kernel: # # UNICORN # # machine "i386" cpu "I586_CPU" ident UNICORN maxusers 20 options INET #InterNETworking options FFS #Berkeley Fast Filesystem #options SOFTUPDATES options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 options UCONSOLE #Allow users to grab the console options SYSVSHM options SYSVSEM options SYSVMSG options "SHMMAX=16777216" options "SHMSEG=32" options "SHMMNI=128" options "SHMALL=4096" options KTRACE #options "AUTO_EOI_2" options "CLK_CALIBRATION_LOOP" options "CLK_USE_I8254_CALIBRATION" options "CLK_USE_TSC_CALIBRATION" options PQ_LARGECACHE #options DDB options "NDGBPORTS=8" #options "VM86" options DEVFS options SMP options APIC_IO options NCPU=2 options DDB config kernel root on da1 controller isa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 controller eisa0 controller ahc0 controller scbus0 at ahc0 bus 0 controller scbus1 at ahc0 bus 1 device da0 at scbus0 target 0 device da1 at scbus0 target 2 device da2 at scbus1 target 2 device sa0 at scbus1 target 3 device sa1 device cd0 at scbus0 target 4 device pass0 # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 #options XSERVER # include code for XFree86 device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr #device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr #device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr #device sio4 at isa? port 0x2a0 tty flags 0x781 #device sio5 at isa? port 0x2a8 tty flags 0x781 #device sio6 at isa? port 0x2b0 tty flags 0x781 #device sio7 at isa? port 0x2b8 tty flags 0x781 irq5 vector siointr device dgb0 at isa? tty port 0x300 iomem 0xd0000 iosiz ? flags 0x0 device lpt0 at isa? port? tty irq 7 vector lptintr device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmint r #controller snd0 #device sb0 at isa? port 0x220 irq9 conflicts drq1 vector sb intr #device opl0 at isa? port 0x388 conflicts #controller snd0 #device mss0 at isa? port 0x530 irq 9 drq 1 vector adintr #device mpu0 at isa? port 0x330 irq 5 drq 0 device de0 pseudo-device loop pseudo-device ether pseudo-device sl 1 # ijppp uses tun instead of ppp device pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 64 pseudo-device gzip # Exec gzipped a.out's pseudo-device bpfilter 4 # Berkeley Packet Filter pseudo-device vn 2 # Vnode Driver -- ******************************************************************************* * Holm Tiffe holm@geophysik.tu-freiberg.de * * Freiberger Strasse 24 * * 09600 Kleinschirma, Germany Microsoft is not the Answer - * * Tel.: 49 3731 74233 Microsoft is the Question, * * UUCP: 49 3731 73719 unicorn!holm and the Answer is no ! * ******************************************************************************* To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message