Date: Thu, 2 Nov 2000 20:01:42 -0600 From: "Michael C . Wu" <keichii@iteration.net> To: Warner Losh <imp@village.org>, mobile@FreeBSD.ORG Cc: wpaul@freebsd.org Subject: Re: pccard inserts and detects but no device attached? Message-ID: <20001102200142.A1281@peorth.iteration.net> In-Reply-To: <20001102170238.B13908@peorth.iteration.net>; from keichii@iteration.net on Thu, Nov 02, 2000 at 05:02:38PM -0600 References: <20001031220455.A424@peorth.iteration.net> <200011020056.RAA01166@harmony.village.org> <20001102170238.B13908@peorth.iteration.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--FCuugMFkClbJLl1L
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Thu, Nov 02, 2000 at 05:02:38PM -0600, Michael C . Wu scribbled:
| On Wed, Nov 01, 2000 at 05:56:58PM -0700, Warner Losh scribbled:
After updating to 4.2-BETA, the wi0 device finally gets attached
root@peorth:~# uname -a
FreeBSD peorth.iteration.net 4.2-BETA FreeBSD 4.2-BETA #0: Thu Nov 2 18:48:18 CST 2000
keichii@peorth.iteration.net:/usr/src/sys/compile/PEORTH.UP i386
root@peorth:~# wicontrol
NIC serial number: [ 00UT32417104 ]
Station name: [ FreeBSD WaveLAN/IEEE node ]
SSID for IBSS creation: [ FreeBSD IBSS ]
Current netname (SSID): [ FreeBSD IBSS ]
Desired netname (SSID): [ ]
Current BSSID: [ 00:00:00:00:00:00 ]
Channel list: [ 2047 ]
IBSS channel: [ 10 ]
Current channel: [ 10 ]
Comms quality/signal/noise: [ 0 27 27 ]
Promiscuous mode: [ Off ]
Port type (1=BSS, 3=ad-hoc): [ 3 ]
MAC address: [ 00:02:2d:0d:42:86 ]
TX rate (selection): [ 3 ]
TX rate (actual speed): [ 2 ]
RTS/CTS handshake threshold: [ 2347 ]
Create IBSS: [ Off ]
Access point density: [ 1 ]
Power Mgmt (1=on, 0=off): [ 0 ]
Max sleep time: [ 100 ]
WEP encryption: [ Off ]
TX encryption key: [ 1 ]
Encryption keys: [ ][ ][ ][ ]
root@peorth:~# wicontrol -i iface -t tx 3
wicontrol: SIOCSWAVELAN: Device not configured
root@peorth:~# wicontrol -i iface -n network
wicontrol: SIOCSWAVELAN: Device not configured
From /var/log/messages:
Nov 2 19:06:51 peorth pccardd[56]: Card "Lucent Technologies"("WaveLAN/IEEE")
[Version 01.01] [] matched "Lucent Technologies" ("WaveLAN/IEEE") [(null)] [(null)]
Nov 2 19:06:55 peorth apmd[193]: start
Nov 2 19:06:57 peorth /kernel: wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 13 slot 0 on pccard0
Nov 2 19:06:57 peorth /kernel: wi0: Ethernet address: 00:02:2d:0d:42:86
Nov 2 19:06:57 peorth pccardd[56]: wi0: Lucent Technologies (WaveLAN/IEEE) inserted.
Nov 2 19:06:57 peorth pccard:wi0: WaveLAN/IEEE inserted
Nov 2 19:06:58 peorth /kernel: wi0: tx buffer allocation failed
Nov 2 19:06:58 peorth pccardd[56]: pccardd started
Nov 2 19:06:59 peorth /kernel: wi0: xmit failed
Nov 2 19:07:03 peorth /kernel: wi0: device timeout
Nov 2 19:07:03 peorth /kernel: wi0: tx buffer allocation failed
Nov 2 19:07:06 peorth /kernel: wi0: xmit failed
Nov 2 19:07:11 peorth /kernel: wi0: device timeout
Nov 2 19:07:11 peorth /kernel: wi0: tx buffer allocation failed
Nov 2 19:09:13 peorth /kernel: wi0: xmit failed
Nov 2 19:09:18 peorth /kernel: wi0: device timeout
Nov 2 19:09:18 peorth /kernel: wi0: tx buffer allocation failed
attached are dmesg, pccard.conf, rc.conf
Would you mind instructing me on how to resolve this problem?
Thank you very much for your time, I appreciate it.
--
+------------------------------------------------------------------+
| keichii@peorth.iteration.net | keichii@bsdconspiracy.net |
| http://peorth.iteration.net/~keichii | Yes, BSD is a conspiracy. |
+------------------------------------------------------------------+
--FCuugMFkClbJLl1L
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.txt"
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-BETA #0: Thu Nov 2 18:48:18 CST 2000
keichii@peorth.iteration.net:/usr/src/sys/compile/PEORTH.UP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (506.98-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 402653184 (393216K bytes)
avail memory = 385642496 (376604K bytes)
Preloaded elf kernel "kernel" at 0xc03af000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xb000-0xb01f at device 7.2 on pci0
uhci0: Invalid irq 255
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
device_probe_and_attach: uhci0 attach returned 6
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
ahc0: <Adaptec 2944 Ultra SCSI adapter> port 0xb400-0xb4ff mem 0xf0020000-0xf0020fff irq 5 at device 9.0 on pci0
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
atapci1: <Promise ATA66 controller> port 0xc800-0xc83f,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb807 mem 0xf0000000-0xf001ffff irq 11 at device 11.0 on pci0
ata2: at 0xb800 on atapci1
ata3: at 0xc000 on atapci1
dc0: <LC82C115 PNIC II 10/100BaseTX> port 0xcc00-0xccff mem 0xf0021000-0xf00210ff irq 12 at device 13.0 on pci0
dc0: Ethernet address: 00:a0:cc:35:d2:cc
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci2: <HighPoint HPT366 ATA66 controller> port 0xd800-0xd8ff,0xd400-0xd403,0xd000-0xd007 irq 11 at device 19.0 on pci0
ata4: at 0xd000 on atapci2
atapci3: <HighPoint HPT366 ATA66 controller> port 0xe400-0xe4ff,0xe000-0xe003,0xdc00-0xdc07 irq 11 at device 19.1 on pci0
ata5: at 0xdc00 on atapci3
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Vadem 469> at port 0x3e2 iomem 0xd8000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
DUMMYNET initialized (000608)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
ad4: 8693MB <IBM-DJNA-370910> [17662/16/63] at ata2-master UDMA66
ad5: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata2-slave UDMA66
ad8: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata4-master UDMA66
ad9: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata4-slave UDMA66
ad10: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata5-master UDMA66
Waiting 15 seconds for SCSI devices to settle
pccard: card inserted, slot 0
sa0 at ahc0 bus 0 target 5 lun 0
sa0: <QUANTUM DLT7000 1B41> Removable Sequential Access SCSI-2 device
sa0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Mounting root from ufs:/dev/ad4s1a
vinum: loaded
vinum: reading configuration from /dev/ad10s1e
vinum: updating configuration from /dev/ad9s1e
vinum: updating configuration from /dev/ad8s1e
vinum: updating configuration from /dev/ad5s1e
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 13 slot 0 on pccard0
wi0: Ethernet address: 00:02:2d:0d:42:86
wi0: tx buffer allocation failed
wi0: xmit failed
wi0: device timeout
wi0: tx buffer allocation failed
wi0: xmit failed
wi0: device timeout
wi0: tx buffer allocation failed
wi0: xmit failed
wi0: device timeout
wi0: tx buffer allocation failed
--FCuugMFkClbJLl1L
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="pccard.conf"
# Default PCCARD configuration file
#
# Removing all IRQ conflicts from this file can't be done because of some
# IRQ-selfish PC-cards. So if you want to use some of these cards in
# your machine, you will be forced to modify their IRQ parameters from
# the following list.
#
# IRQ == 0 means "allocate free IRQ from IRQ pool"
# IRQ == 16 means "do not use IRQ (e.g. PIO mode)"
#
# $FreeBSD: src/etc/defaults/pccard.conf,v 1.98.2.5 2000/09/22 10:12:08 sanpei Exp $
#
# Send new entries for this file to imp@freebsd.org. He's volunteered
# to act as coordinator for this file.
#
# Generally available IO ports
io 0x240-0x360
# Generally available IRQs (Built-in sound-card owners remove 5)
irq 13
# Available memory slots
memory 0xd8000 32k
# Include user configration file
# This allow you to override or add configurations.
# Lucent WaveLAN/IEEE
card "Lucent Technologies" "WaveLAN/IEEE"
config 0x1 "wi" ?
# insert /etc/pccard_ether $device start
# remove /etc/pccard_ether $device stop
insert logger -t pccard:$device -s WaveLAN/IEEE inserted
insert /etc/pccard_ether $device
insert /etc/setup_$device
remove logger -t pccard:$device -s WaveLAN/IEEE removed
remove /sbin/ifconfig $device delete
--FCuugMFkClbJLl1L
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="rc.conf"
start_vinum="YES" # set to YES to start vinum
inetd_enable="YES"
portmap_enable="YES"
sendmail_enable="NO"
linux_enable="YES"
ntpdate_flags="time.ots.utexas.edu"
accounting_enable="YES"
moused_enable="YES"
saver="daemon"
font8x8="swiss-8x8"
font8x14="NO"
font8x16="swiss-8x16"
keyrate="fast"
ntpdate_enable="YES"
nfs_server_enable="YES"
nfs_client_enable="YES"
named_enable="YES"
network_interfaces="dc0 lo0"
ifconfig_dc0="inet 208.190.180.178 netmask 255.255.255.248"
defaultrouter="208.190.180.182"
hostname="peorth.iteration.net"
usbd_enable="YES"
allscreens_flags="-i mode VGA_80x60" # Set this vidcontrol mode for all virtual screens
moused_flags="-z 4"
moused_type="auto" # See man page for rc.conf(5) for available settings.
moused_port="/dev/psm0" # Set to your mouse port.
sshd_enable="YES"
firewall_enable="NO" # Set to YES to enable firewall functionality
firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
firewall_type="OPEN" # Firewall type (see /etc/rc.firewall)
firewall_quiet="NO" # Set to YES to suppress rule display
firewall_logging="YES" # Set to YES to enable events logging
firewall_flags="" # Flags passed to ipfw when type is a file
ip_portrange_first="30000" # Set first dynamically allocated port
ip_portrange_last="60000" # Set last dynamically allocated port
ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
natd_program="/sbin/natd" # path to natd, if you want a different one.
natd_enable="NO" # Enable natd (if firewall_enable == YES).
natd_interface="fxp0" # Public interface or IPaddress to use.
#natd_flags="" # Additional flags for natd.
#tcp_extensions=""
usbd_enable="YES"
sendmail_enable="YES"
sshd_enable="YES"
portmap_enable="YES"
inetd_enable="YES"
network_interfaces="dc0 lo0"
ifconfig_dc0="inet 208.190.180.178 netmask 255.255.255.248"
defaultrouter="208.190.180.182"
hostname="peorth.iteration.net"
usbd_enable="YES"
nfs_reserved_port_only="YES"
apm_enable="YES" # Set to YES to enable APM BIOS functions (or NO).
apmd_enable="YES" # Run apmd to handle APM event from userland.
apmd_flags="" # Flags to apmd (if enabled).
pccard_enable="YES" # Set to YES if you want to configure PCCARD devices.
pccard_mem="0xd8000" # If pccard_enable=YES, this is card memory address.
pccard_beep="2" # pccard beep type.
pccard_ifconfig="inet 10.0.0.1 netmask 255.255.255.0" # Specialized pccard ethernet configuration (or NO).
pccardd_flags="" # Additional flags for pccardd.
pccard_conf="/etc/pccard.conf" # pccardd(8) config file
gateway_enable="YES"
firewall_type="OPEN"
natd_enable="YES"
natd_interface="dc0"
--FCuugMFkClbJLl1L--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001102200142.A1281>