Date: Mon, 19 Jun 2006 16:15:47 -0700 From: John-Mark Gurney <gurney_j@resnet.uoregon.edu> To: Joe Holden <joe@joeholden.co.uk> Cc: freebsd-drivers@freebsd.org Subject: Re: LSI Logic FC919X Controller Message-ID: <20060619231546.GE1142@funkthat.com> In-Reply-To: <44893245.1060008@joeholden.co.uk> References: <4487F5CE.4090601@joeholden.co.uk> <7579f7fb0606081044i7598fefn4bb64d55c8acdbc2@mail.gmail.com> <4488A2B6.8040108@joeholden.co.uk> <7579f7fb0606081551v13771ec7y9d262f15c695a004@mail.gmail.com> <44893245.1060008@joeholden.co.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
Joe Holden wrote this message on Fri, Jun 09, 2006 at 09:33 +0100:
> Matthew Jacob wrote:
> > Oh- 919X, not 919.
> >
> > See if this patch works for you:
> > ------------------------------------------------------------------------
> >
> > ? DOMAIN_VALIDATION_CODE
> > Index: mpt_pci.c
> > ===================================================================
> > RCS file: /home/ncvs/src/sys/dev/mpt/mpt_pci.c,v
> > retrieving revision 1.33
> > diff -u -r1.33 mpt_pci.c
> > --- mpt_pci.c 2 Jun 2006 18:50:39 -0000 1.33
> > +++ mpt_pci.c 8 Jun 2006 22:48:27 -0000
> > @@ -130,6 +130,10 @@
> > #define PCI_PRODUCT_LSI_FC929X 0x0626
> > #endif
> >
> > +#ifndef PCI_PRODUCT_LSI_FC919X
> > +#define PCI_PRODUCT_LSI_FC919X 0x0628
> > +#endif
> > +
> > #ifndef PCI_PRODUCT_LSI_FC7X04X
> > #define PCI_PRODUCT_LSI_FC7X04X 0x0640
> > #endif
> > @@ -225,6 +229,9 @@
> > case PCI_PRODUCT_LSI_FC929:
> > desc = "LSILogic FC929 FC Adapter";
> > break;
> > + case PCI_PRODUCT_LSI_FC919X:
> > + desc = "LSILogic FC919X FC Adapter";
> > + break;
> > case PCI_PRODUCT_LSI_FC929X:
> > desc = "LSILogic FC929X 2Gb/s FC Adapter";
> > break;
> > @@ -373,6 +380,7 @@
> > case PCI_PRODUCT_LSI_FC909A:
> > case PCI_PRODUCT_LSI_FC919:
> > case PCI_PRODUCT_LSI_FC929:
> > + case PCI_PRODUCT_LSI_FC919X:
> > case PCI_PRODUCT_LSI_FC7X04X:
> > mpt->is_fc = 1;
> > break;
> >
> Hi Matthew, this patch appears to have worked, however it also appears
> to have been detected first, which has broken my fstab, is there any way
> to order disks/hardware detection?
Hmmm.. you used to be able to wire down the scsi bus using:
controller scbus0 at ncr0
disk da0 at scbus0 target 0
disk da1 at scbus0 target 1
disk da4 at scbus0 target 2
disk da2 at scbus0 target 4
I'm not sure -current still supports it though..
The other thing that you can do is use labels... geom_label will provide
disk devices based upon their labeled names...
--
John-Mark Gurney Voice: +1 415 225 5579
"All that I will do, has been done, All that I have, has not."
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060619231546.GE1142>