Date: Thu, 19 Nov 2009 10:23:55 -0600 From: Robert Noland <rnoland@FreeBSD.org> To: Emil Smolenski <ambsd@raisa.eu.org> Cc: freebsd-fs@freebsd.org, freebsd-current@freebsd.org Subject: Re: Boot with ZFS on single disk: "ZFS: i/o error - all block copies unavailable" [was: Re: GPT boot with ZFS RAIDZ "ZFS: i/o error - all block copies unavailable"] Message-ID: <1258647835.2303.105.camel@balrog.2hip.net> In-Reply-To: <op.u3m0dyn8qvde5b@am-laptop.local.org> References: <op.u3hw9wl0qvde5b@am-laptop.local.org> <1258390784.2303.42.camel@balrog.2hip.net> <op.u3h252qaqvde5b@bolt.zol> <op.u3j6m8w5qvde5b@bolt.zol> <1258497221.2303.66.camel@balrog.2hip.net> <op.u3kdq613qvde5b@bolt.zol> <1258552247.2303.75.camel@balrog.2hip.net> <op.u3llw0plqvde5b@am-laptop.local.org> <1258562628.2303.83.camel@balrog.2hip.net> <f383264b0911181548r3b9cce46i449e4e589148a62d@mail.gmail.com> <1258603057.2303.92.camel@balrog.2hip.net> <op.u3m0dyn8qvde5b@am-laptop.local.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-BDiV+OcYAkHUcmXfsTdc
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
On Thu, 2009-11-19 at 11:21 +0100, Emil Smolenski wrote:
> Matt Reimer wrote:
> > Robert's on to something. It looks like your LBAs are probably
> > overflowing 32 bits. This would affect all vdev regardless of type.
> > Try the attached patch.
>
> Robert Noland wrote:
> >> 220000de400
> > This divided by 512 byte block size is 33 bits... At a glance, the patch
> > looks ok to me. I'll do a more thorough review of this tomorrow.
>
> Unfortunately it don't work. Error is the same as before:
Ok, I was concerned about the assembly code... So, I've been chatting
with jhb@ this morning. Please try this patch that jhb@ came up with
instead of Matt's latest patch.
robert.
> ZFS: i/o error - all block copies unavailable
> ZFS: can't read MOS
> ZFS: unexpected object set type 0
> ZFS: unexpected object set type 0
>
> FreeBSD/i386 boot
> Default: pgpool:/boot/kernel/kernel
> boot:
> ZFS: unexpected object set type 0
>
>
> This is 7.2-STABLE, amd64. My test procedure:
>
> 1. I fully synchronized these zfsboot-related directories with -CURRENT:
>
> src/sys/boot/i386/zfsboot
> src/sys/boot/zfs
> src/sys/cddl/boot/zfs
>
> 2. I applied Matt Reimer's zfsboot.c.patch3 patch:
>
> # cd /usr/src/sys/boot/
> # patch < /path/to/zfsboot.c.patch3
>
> 3. Then I did:
>
> # make clean; make cleandir
> # make obj ; make depend ; make
> # cd i386/loader
> # make install
> # cd /usr/src/sys/boot/i386/zfsboot
> # make install
> # sysctl kern.geom.debugflags=16
> # dd if=/boot/zfsboot of=/dev/da0 count=1
> # dd if=/boot/zfsboot of=/dev/da0 skip=1 seek=1024
> # reboot
>
> 4. Result: error shown above.
>
> Thanks!
>
--
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
--=-BDiV+OcYAkHUcmXfsTdc
Content-Disposition: attachment; filename="zfsboot_64.patch"
Content-Type: text/x-patch; name="zfsboot_64.patch"; charset="us-ascii"
Content-Transfer-Encoding: 7bit
--- //depot/user/jhb/boot/sys/boot/i386/zfsboot/zfsboot.c
+++ /home/jhb/work/p4/boot/sys/boot/i386/zfsboot/zfsboot.c
@@ -138,8 +138,8 @@
unsigned unit;
unsigned slice;
unsigned part;
- unsigned start;
int init;
+ daddr_t start;
};
static char cmd[512];
static char kname[1024];
@@ -163,7 +163,7 @@
static void printf(const char *,...);
static void putchar(int);
static uint32_t memsize(void);
-static int drvread(struct dsk *, void *, unsigned, unsigned);
+static int drvread(struct dsk *, void *, daddr_t, unsigned);
static int keyhit(unsigned);
static int xputc(int);
static int xgetc(int);
@@ -310,7 +310,8 @@
vdev_read(vdev_t *vdev, void *priv, off_t off, void *buf, size_t bytes)
{
char *p;
- unsigned int lba, nb;
+ daddr_t lba;
+ unsigned int nb;
struct dsk *dsk = (struct dsk *) priv;
if ((off & (DEV_BSIZE - 1)) || (bytes & (DEV_BSIZE - 1)))
@@ -964,7 +965,7 @@
#endif
static int
-drvread(struct dsk *dsk, void *buf, unsigned lba, unsigned nblk)
+drvread(struct dsk *dsk, void *buf, daddr_t lba, unsigned nblk)
{
#ifdef GPT
static unsigned c = 0x2d5c7c2f;
@@ -999,7 +1000,7 @@
v86.es = VTOPSEG(buf);
v86.eax = lba;
v86.ebx = VTOPOFF(buf);
- v86.ecx = lba >> 16;
+ v86.ecx = lba >> 32;
v86.edx = nblk << 8 | dsk->drive;
v86int();
v86.ctl = V86_FLAGS;
--- //depot/user/jhb/boot/sys/boot/i386/zfsboot/zfsldr.S
+++ /home/jhb/work/p4/boot/sys/boot/i386/zfsboot/zfsldr.S
@@ -80,10 +80,10 @@
.org 0x25,0x90
/*
- * Trampoline used by boot2 to call read to read data from the disk via
+ * Trampoline used by zfsboot to call read to read data from the disk via
* the BIOS. Call with:
*
- * %cx:%ax - long - LBA to read in
+ * %ecx:%eax - long - LBA to read in
* %es:(%bx) - caddr_t - buffer to read data into
* %dl - byte - drive to read from
* %dh - byte - num sectors to read
@@ -94,10 +94,8 @@
/*
* Setup an EDD disk packet and pass it to read
*/
-xread.1: # Starting
- pushl $0x0 # absolute
- push %cx # block
- push %ax # number
+xread.1: pushl %ecx # Starting absolute block
+ pushl %eax # block number
push %es # Address of
push %bx # transfer buffer
xor %ax,%ax # Number of
@@ -245,10 +243,11 @@
/*
* Trampoline used to call read from within boot1.
*/
-nread: xor %ax,%ax # Sector offset in partition
+nread: xor %eax,%eax # Sector offset in partition
nread.1: mov $MEM_BUF,%bx # Transfer buffer
- add 0x8(%si),%ax # Get
- mov 0xa(%si),%cx # LBA
+ xor %ecx,%ecx # Get
+ addl 0x8(%si),%eax # LBA
+ adc $0,%ecx
push %cs # Read from
callw xread.1 # disk
jnc return # If success, return
--=-BDiV+OcYAkHUcmXfsTdc--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1258647835.2303.105.camel>