Date: Tue, 08 Aug 2006 21:34:51 +0200 From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> To: Cy Schubert <Cy.Schubert@komquats.com> Subject: Re: Acer Aspire AS5672 laptop - acpi problems Message-ID: <20060808213451.fbd91c89.torfinn.ingolfsen@broadpark.no> Resent-Message-ID: <20060808214043.d1fe2bcb.torfinn.ingolfsen@broadpark.no> In-Reply-To: <200607161705.k6GH5Ixa076583@cwsys.cwsent.com> References: <20060716183911.2f80f748.torfinn.ingolfsen@broadpark.no> <200607161705.k6GH5Ixa076583@cwsys.cwsent.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --Boundary_(ID_zeXsOSIV2GD0A6h4nzvLlQ) Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT On Sun, 16 Jul 2006 10:05:18 -0700 Cy Schubert <Cy.Schubert@komquats.com> wrote: > You may want to try the patch anyway. It enables EC burst mode within I finally had time to try this patch: http://www.freebsd.org/cgi/query-pr.cgi?pr=98171 > Anyhow, you may want to enable EC burst mode. That seems to solve the > problems the Linux folks experience. It may solve yours too. After bulding and installing a new kernel, I enabled EC burst with: hw.acpi.ec.burst=1 in /boot/loader.conf At first, the machine rebooted itself, due to these messages in /var/log/messages: Aug 8 20:26:44 kg-home kernel: acpi_tz0: WARNING - current temperature (144.0C) exceeds safe limits Setting debug.acpi.disabled="thermal" in /boot/loader.conf fixed that problem. Unfortunately, it didn't solve the other acpi-related problems - bge0 still fails to attach and so on. Se attached dmesg output. -- Regards, Torfinn Ingolfsen, Norway --Boundary_(ID_zeXsOSIV2GD0A6h4nzvLlQ) Content-type: text/plain; name=kg-home-dmesg-6.1-stable-20060808.txt Content-transfer-encoding: 7BIT Content-disposition: attachment; filename=kg-home-dmesg-6.1-stable-20060808.txt Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-STABLE #1: Tue Aug 8 20:16:39 CEST 2006 root@kg-home.kg4.no:/usr/obj/usr/src/sys/AS5672 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Genuine Intel(R) CPU T2250 @ 1.73GHz (1733.41-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xc189<SSE3,MON,EST,TM2,<b14>,<b15>> AMD Features=0x100000<NX> Cores per package: 2 real memory = 2145910784 (2046 MB) avail memory = 2095009792 (1997 MB) ACPI APIC Table: <INTEL CALISTGA> ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <PTLTD RSDT> on motherboard ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc63e9200 StartNode 0xc63e9200 ReturnNode 0 ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc63e8d80 StartNode 0xc63e8d80 ReturnNode 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) unknown: I/O range not supported Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <multimedia> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci4: <ACPI PCI bus> on pcib4 bge0: <Broadcom BCM5789 Gigabit Ethernet, ASIC rev. 0x4201> irq 18 at device 0.0 on pci4 bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). bge0: couldn't map memory device_attach: bge0 attach returned 6 pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci5: <ACPI PCI bus> on pcib5 uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xc8004000-0xc80043ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ugen0: OEM Camera, rev 2.00/1.00, addr 2 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci10: <ACPI PCI bus> on pcib6 cbb0: <PCI-CardBus Bridge> mem 0xc8404000-0xc8404fff irq 20 at device 9.0 on pci10 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <1394 Open Host Controller Interface> mem 0xc8405000-0xc84057ff,0xc8400000-0xc8403fff irq 20 at device 9.1 on pci10 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:c0:9f:00:00:9a:84:d3 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:c0:9f:9a:84:d3 fwe0: Ethernet address: 02:c0:9f:9a:84:d3 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci10: <mass storage> at device 9.2 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x18c0-0x18df irq 19 at device 31.3 on pci0 ichsmb0: [GIANT-LOCKED] smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 sio0 port 0x2f8-0x2ff,0x6f8-0x6ff irq 3 drq 3 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xdf800-0xdffff,0xe0000-0xe17ff on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1733405440 Hz quality 800 Timecounters tick every 1.000 msec ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc63e9200 StartNode 0xc63e9200 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc63e9100), AE_NOT_FOUND ad0: 114473MB <SAMSUNG HM120JI YF100-10> at ata0-master UDMA33 acd0: DVDR <MATSHITADVD-RAM UJ-845S/D201> at ata1-master UDMA33 Trying to mount root from ufs:/dev/ad0s3a ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc63e9200 StartNode 0xc63e9200 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc63e9100), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc63e9200 StartNode 0xc63e9200 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc63e9100), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc63e9200 StartNode 0xc63e9200 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc63e9100), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc63e9200 StartNode 0xc63e9200 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc63e9100), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc63e9200 StartNode 0xc63e9200 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc63e9100), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc63e9200 StartNode 0xc63e9200 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc63e9100), AE_NOT_FOUND --Boundary_(ID_zeXsOSIV2GD0A6h4nzvLlQ)--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060808213451.fbd91c89.torfinn.ingolfsen>