Date: Sun, 13 May 2001 01:20:21 -0400 From: Mike Tancsa <mike@sentex.net> To: Jonathan Lemon <jlemon@flugsvamp.com>, stable@FreeBSD.ORG Subject: Re: HEADS UP - fxp now requires miibus Message-ID: <4.2.2.20010512203209.03367fc8@192.168.0.12> In-Reply-To: <20010512192841.I617@prism.flugsvamp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
At 07:28 PM 5/12/2001 -0500, Jonathan Lemon wrote:
>I don't anticipate any problems, the driver has been tested
>in -current and -stable for a while.
Any luck with the 815E issue ?
fxp1: <Intel Pro/100 Ethernet> port 0xc400-0xc43f mem 0xd5101000-0xd5101fff
irq 15 at device 8.0 on pci1
fxp1: Ethernet address 00:01:80:07:1e:f4
inphy1: <i82562EM 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
it takes about 3 seconds only to get
fxp1: SCB timeout
fxp1: SCB timeout
fxp1: device timeout
when connected to a 10baseT switch (Compaq in this case)
The other strange thing about this is that if I force it to 10baseT/UTP the
problem is not quite as bad as when letting it detect it via autoselect. I
still get the SCB timeouts, but the card seems to recover from them
slightly faster.
---Mike
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Network Administration, mike@sentex.net
Sentex Communications www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.2.2.20010512203209.03367fc8>