From owner-freebsd-questions Wed May 27 08:03:51 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id IAA15032 for freebsd-questions-outgoing; Wed, 27 May 1998 08:03:51 -0700 (PDT) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from E35.nz.fh-koeln.de (e35.nz.FH-Koeln.DE [139.6.1.14]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id IAA14995 for ; Wed, 27 May 1998 08:03:31 -0700 (PDT) (envelope-from Csaba.Wachter@E35.nz.fh-koeln.de) Received: from Fh-Koeln.de (yoda.noc.FH-Koeln.DE) by E35.nz.fh-koeln.de with SMTP id AA19130 (5.67b/IDA-1.5 for ); Wed, 27 May 1998 17:01:24 +0200 Message-Id: <356C2B04.C9567D10@Fh-Koeln.de> Date: Wed, 27 May 1998 17:02:29 +0200 From: Csaba Wachter-Barta X-Mailer: Mozilla 4.03 [en] (X11; I; HP-UX A.09.05 9000/715) Mime-Version: 1.0 To: THIERRY.HERBELOT@telspace.alcatel.fr, freebsd-questions@FreeBSD.ORG Subject: Re: Rip : make kernel problem References: Content-Type: multipart/mixed; boundary="------------343C842E955F7BB44E1C6309" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --------------343C842E955F7BB44E1C6309 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sorry ! That was not very intelligent from me to give so small information, i used (i would like to use )release 2.2.6 on machine PII-233MHz , ASUS P2L7 440LX with Adaptec 2940 on board,128MB with following cards: 3Com509B Matrox Mystique II WinTV-Primio SB AWE 64Value and here is the message that i get after type make : ioconf.o:Undefined sysmbol '_opdriver' referenced from data segment ***Error code 1 my configuration file i will be attempt. Thanks, Csaba THIERRY.HERBELOT@telspace.alcatel.fr wrote: > which release ? > > which driver enabled ? > > give us info !!!!!!!!!!!! > > TfH > > ____________________________ Siparateur Riponse ________________________________ > Objet : make kernel problem > Auteur : Csaba.Wachter@Fh-Koeln.de > Date : 27/05/98 15:08 > > Hye All, > > I`am trying to compile my new kernel and i get following Error: > > ioconf.o:Undefined sysmbol '_opdriver' referenced from data segment > ***Error code 1 > > I have a P2 machine with SCSI AHA2940, 3Com509B and AWE64Value Card > > The configuration file seems at like right and i don't know what is to > do. > > Anybody can help me ? > > Thanks, > Csaba > -- ********************************************************************* Csaba Wachter-Barta | E-Mail: Csaba.Wachter@Fh-Koeln.de Fachhochschule Koeln | Fachbereich NT / S.G. 4.4 | D - 50679 Koeln | Fax : 0221 / 82752494 ********************************************************************* --------------343C842E955F7BB44E1C6309 Content-Type: text/plain; charset=us-ascii; name="ASTERIX" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="ASTERIX" # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.77.2.22 1998/03/24 01:20:14 jkh Exp $ machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" cpu "I586_CPU" #cpu "I686_CPU" ident ASTERIX maxusers 10 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 controller isa0 #controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 #tape ft0 at fdc0 drive 2 options "CMD640" # work around CMD640 chip deficiency #controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr #disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 #controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 #options ATAPI #Enable ATAPI support for IDE bus #options ATAPI_STATIC #Don't do it as an LKM #device wcd0 #IDE CD-ROM #device wfd0 #IDE floppy (LS-120) # A single entry for any of these controllers (ncr, ahb, ahc, amd) is # sufficient for any number of installed devices. # # Note: The dpt driver is present in this release but was left disabled # due to its relatively late entry (it's almost certainly benign to enable # it but we didn't want to risk any chance of destabilizing 2.2.6). To # enable DPT support, uncomment the dpt0 controller entry and the two # options DPTOPT and DPT_MEASURE_PERFORMANCE entries below. #controller ncr0 #controller amd0 #controller ahb0 controller ahc0 #controller dpt0 #controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr #controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr #options DPTOPT # will go away soon #options DPT_MEASURE_PERFORMANCE # just enable for now #options DPT_VERIFY_HINTR # Some hardware must have it! #options DPT_TRACK_CCB_STATES # Some hardware must have it! #options DPT_HANDLE_TIMEOUTS # Some hardware must have it! #options DPT_TIMEOUT_FACTOR=4 # Some hardware needs more controller scbus0 device sd0 device od0 #See LINT for possible `od' options. device st0 device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr # # Laptop support (see LINT for more options) # device apm0 at isa? disable # Advanced Power Management options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr #device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr #device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device lpt1 at isa? port? tty device mse0 at isa? port 0x23c tty irq 5 vector mseintr device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device de0 #device fxp0 #device tx0 #device vx0 #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr device ep0 at isa? port 0x300 net irq 15 vector epintr #device ex0 at isa? port? net irq? vector exintr #device fe0 at isa? port 0x300 net irq ? vector feintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr #device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr pseudo-device loop pseudo-device ether pseudo-device log #pseudo-device sl 1 pseudo-device ppp 1 pseudo-device vn 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory. # options SYSVSHM # Adding Sounddriver to Kernel AWE-0.4 for FreeBSD # Date:26May98 Csaba Wachter-Barta # controller pnp0 controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device op10 at isa? port 0x388 device awe0 at isa? port 0x620 --------------343C842E955F7BB44E1C6309-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message