Date: Thu, 10 Apr 2003 13:41:29 +0300 From: Maxim Mazurok <maxim@km.ua> To: freebsd-sparc@FreeBSD.ORG Subject: many troubles Message-ID: <20030410104129.GB538@km.ua>
next in thread | raw e-mail | index | archive | help
at first, sorry for my bad english.
please, help me.
I have Ultra AXi motherboard and UltraIIi processor:
maxim@geddar:~>dmesg| head -9
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Thu Apr 10 11:26:08 EEST 2003
root@geddar.km.ua:/usr/src/sys/sparc64/compile/GEDDAR
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0344000.
Timecounter "tick" frequency 360130984 Hz
cpu0: Sun Microsystems UltraSparc-IIi Processor (360.13 MHz CPU)
Model: SUNW,UltraSPARC-IIi-Engine
full cvsup and rebuild about 5-7 hour ago...
problems:
1. i can't see memory size on my sparc in dmesg output. :)
2. u have many problems width BIND(2).
it's fragment from /usr/src/crypto/openssh/sshd.c:
===cut===
if (bind(listen_sock, ai->ai_addr, ai->ai_addrlen) < 0) {
===cut===
this fragment worked. and sshd worked widthout problems.
apache, sendmail worked too.
but all next fragments no worked :(
next fragments from /usr/src/libexec/ftpd/ftpd.c
===cut===
if (bind(ctl_sock, (struct sockaddr *)&server_addr, server_addr.su_len) < 0) {
===cut===
next fragments from /usr/src/contrib/ntp/ntpd/ntp_io.c
===cut===
if (bind(fd, (struct sockaddr *)addr, sizeof(*addr)) < 0) {
===cut===
next fragments from /usr/src/contrib/bind/bin/named/ns_main.c
===cut===
if (bind(sp->s_rfd, (struct sockaddr *)&src, sizeof(src)) < 0)
===cut===
fragments of /var/log/messages:
===cut===
Apr 10 13:00:27 geddar named[251]: bind(dfd=20, [62.149.4.13].53): Can't assign requested address
Apr 10 13:00:27 geddar named[251]: deleting interface [62.149.4.13].53
Apr 10 13:00:29 geddar ntpd[356]: bind() fd 5, family 2, port 123, addr 62.149.4.13, in_classd=0 flags=1 fails: Can't assign requested address
===cut===
:(
3. i inserted 4 RealTec 8139 cards to my motherboard and see next:
maxim@geddar:~>dmesg| grep "RealTek 8139"
rl0: <RealTek 8139 10/100BaseTX> port 0xc00-0xcff mem 0xa000-0xa0ff irq 0 at device 2.0 on pci1
rl1: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0xc000-0xc0ff irq 4 at device 3.0 on pci1
rl2: <RealTek 8139 10/100BaseTX> port 0x800400-0x8004ff mem 0x42000000-0x420000ff irq 20 at device 3.0 on pci2
rl3: <RealTek 8139 10/100BaseTX> port 0x800800-0x8008ff mem 0x42002000-0x420020ff irq 24 at device 4.0 on pci2
rl0 mapped to irq 0. it's right?
4. after buildworld about 2 weeks ago i see broken 'systat -vm' output in
section about activity hard disks (i have 4 HDD, CDROM and pass devices):
Disks 0 0 0 0 0 0 0
KB/t 16.00 16.00 0.00 0.00 0.00 0.00 0.00
tps ***** ***** 0 0 0 0 0
MB/s ***** ***** 0.00 0.00 0.00 0.00 0.00
% busy 0 6 0 0 0 0 0
--
Maxim Mazurok (MMP2-RIPE)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030410104129.GB538>