Date: Tue, 08 Apr 1997 09:33:12 +0100 From: David Malone <dwmalone@maths.tcd.ie> To: freebsd-scsi@freebsd.org Subject: Re: Latest round around the AIC7xxx Message-ID: <9704080933.aa02376@salmon.maths.tcd.ie> In-Reply-To: Your message of "Tue, 08 Apr 1997 10:28:05 %2B0300." <199704080728.KAA00538@silver.sms.fi>
next in thread | previous in thread | raw e-mail | index | archive | help
We got a three crashes last night after moving to the most recent version ( cvsup'ed last night - it hasn't changes since then I think ). I've included the log messages from the first two. The last one was some sort of silent reboot, which never came back up again ( I think it was stuck at the bit where the card's BIOS stuff is installed, but the graphics card was in a funny mode so I can't tell ). As someone else pointed we are using CCD for a news spool disk, if this can possibly be related. We're using it with the CCD_OFFSET=0 flag, which should be OK, as neither of the partitions used are at the start of the disk. Also all the hassel we've got log messages for has been on the second controler. Though as /var/ is on the first controler I guess we wouldn't see any messages if that got stuck. David. =============================================================================== Apr 7 23:33:33 synge /kernel: ahc1:A:1: no active SCB for reconnecting target - issuing ABORT Apr 7 23:33:33 synge /kernel: SAVED_TCL == 0x10 Apr 7 23:33:34 synge /kernel: ahc1:A:0: no active SCB for reconnecting target - issuing ABORT Apr 7 23:33:34 synge /kernel: SAVED_TCL == 0x10 Apr 7 23:33:34 synge /kernel: ahc1:A:0: Target did not send an IDENTIFY message . LASTPHASE = 0xc0, SAVED_TCL == 0x10 Apr 7 23:33:34 synge /kernel: ahc1: Issued Channel A Bus Reset. 4 SCBs aborted Apr 7 23:33:34 synge /kernel: Clearing bus reset Apr 7 23:33:34 synge /kernel: Clearing 'in-reset' flag Apr 7 23:33:34 synge /kernel: sd8(ahc1:0:0): UNIT ATTENTION asc:29,0 Apr 7 23:33:34 synge /kernel: sd8(ahc1:0:0): Power on, reset, or bus device re set occurred field replaceable unit: 14 Apr 7 23:33:34 synge /kernel: , retries:3 =============================================================================== Scecond one: =============================================================================== Apr 8 00:17:07 synge /kernel: ahc1:A:1: no active SCB for reconnecting target - issuing ABORT Apr 8 00:17:07 synge /kernel: SAVED_TCL == 0x10 Apr 8 00:17:17 synge /kernel: sd9(ahc1:1:0): SCB 0x2 - timed out in message out phase, SCSISIGI == 0x0 Apr 8 00:17:17 synge /kernel: SEQADDR == 0x99 Apr 8 00:17:17 synge /kernel: sd9(ahc1:1:0): abort message in message buffer Apr 8 00:17:17 synge /kernel: sd8(ahc1:0:0): SCB 0x0 timedout while recovery in progress Apr 8 00:17:17 synge /kernel: sd9(ahc1:1:0): SCB 0x2 - timed out in message out phase, SCSISIGI == 0x0 Apr 8 00:17:17 synge /kernel: SEQADDR == 0x99 Apr 8 00:17:17 synge /kernel: ahc1: Issued Channel A Bus Reset. 4 SCBs aborted Apr 8 00:17:17 synge /kernel: Clearing bus reset Apr 8 00:17:18 synge /kernel: Clearing 'in-reset' flag Apr 8 00:17:18 synge /kernel: sd9(ahc1:1:0): no longer in timeout Apr 8 00:17:18 synge /kernel: sd8(ahc1:0:0): UNIT ATTENTION asc:29,0 Apr 8 00:17:18 synge /kernel: sd8(ahc1:0:0): Power on, reset, or bus device re set occurred field replaceable unit: 14 Apr 8 00:17:18 synge /kernel: , retries:3 ===============================================================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi? <9704080933.aa02376>