Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 5 Jun 2006 10:37:13 +0200
From:      Alexander Konovalenko <kono@kth.se>
To:        freebsd-net@freebsd.org
Cc:        freebsd-hardware@freebsd.org
Subject:   ndis driver for WG311 wireless card problem
Message-ID:  <200606051037.14391.kono@kth.se>

next in thread | raw e-mail | index | archive | help

Hello,

I know that chipset for NETGEAR WG311v3 PCI card is not supported natively in 
FreeBSD, so I am trying to use NDIS driver generated from WinXP driver on 
FreeBSD 6.1 (STABLE) i386 (old PIII 666Mhz box). After loading kernel module 
ifconfig shows:

#ifconfig
ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
        ether 00:14:6c:72:35:2a
        media: IEEE 802.11 Wireless Ethernet autoselect
        status: no carrier
        ssid "" channel 1
        authmode OPEN privacy OFF txpowmax 100 protmode CT


However, when try to scan for access point I get:

#ifconfig ndis0 scan
ifconfig: unable to get scan results

I am sure that my access point is functional because I am running FreeBSD 6.1 
also on laptop where NETGEAR WG511 PCMCIA card works prefectly (with NDIS).  
All network configuration is the same on both computers.

When I unload and then load kernel module machine hangs with no log messages 
saved. 

The ndis drivers generated from Win2k, Win98 give the same result.

At the begining I inserted WG311 into first PCI slot where it did not work at 
all (probaly irq problem), then I put it in another PCI slot so at least 
ifconfig showed me something.


Any ideas how to make it functional?

thanks!


/Alexander Konovalenko






Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200606051037.14391.kono>