From owner-freebsd-current Mon Jun 21 20:29:58 1999 Delivered-To: freebsd-current@freebsd.org Received: from cs.rpi.edu (mumble.cs.rpi.edu [128.213.8.16]) by hub.freebsd.org (Postfix) with ESMTP id 07C9A14C27 for ; Mon, 21 Jun 1999 20:29:47 -0700 (PDT) (envelope-from crossd@cs.rpi.edu) Received: from cs.rpi.edu (monica.cs.rpi.edu [128.213.7.2]) by cs.rpi.edu (8.9.3/8.9.3) with ESMTP id XAA03744 for ; Mon, 21 Jun 1999 23:29:45 -0400 (EDT) Message-Id: <199906220329.XAA03744@cs.rpi.edu> To: current@freebsd.org Subject: what's different with AHC between -stable and -current? Date: Mon, 21 Jun 1999 23:29:45 -0400 From: "David E. Cross" Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have 3 AHC devices that work great under -STABLE, but -CURRENT doesn't even acknowledge they exist. GENERIC kernels on both. Here is the boot information from the working -STABLE system: Probing for devices on PCI bus 1: ahc0: rev 0x00 int a irq 21 on pci1.4.0 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc1: rev 0x00 int a irq 22 on pci1.6.0 ahc1: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc2: rev 0x03 int a irq 20 on pci1.8.0 ahc2: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs -CURRENT sees nothing. What additional information will I need to provide? -- David Cross | email: crossd@cs.rpi.edu Systems Administrator/Research Programmer | Web: http://www.cs.rpi.edu/~crossd Rensselaer Polytechnic Institute, | Ph: 518.276.2860 Department of Computer Science | Fax: 518.276.4033 I speak only for myself. | WinNT:Linux::Linux:FreeBSD To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message