Date: Tue, 10 Jan 2006 19:21:42 GMT From: David Brown <djb@gofree.co.uk> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/91609: Booting takes *a long time* unless power cord is plugged into laptop Message-ID: <200601101921.k0AJLgen073384@www.freebsd.org> Resent-Message-ID: <200601101930.k0AJU4tT020509@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 91609
>Category: i386
>Synopsis: Booting takes *a long time* unless power cord is plugged into laptop
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Jan 10 19:30:03 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: David Brown
>Release: 6-Stable
>Organization:
n/a
>Environment:
FreeBSD bsdlaptop 6.0-STABLE FreeBSD 6.0-STABLE #32: Sun Jan 8 17:10:19 GMT 2006 djbrown@bsdlaptop:/usr/obj/usr/src/sys/MYKERN i386
>Description:
Hardware: IBM T40 laptop.
When I boot my machine with the power supply on all is well
But when I boot using the battery (fully charged or not) the boot process takes a long time and always pauses for a few minutes in the same place:
"
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
1993, 1994
The Regents of the University of California. All righ
ts reserved.
FreeBSD 6.0-STABLE #32: Sun Jan 8 17:10:19 GMT 2006
djbrown@bsdlaptop:/usr/obj/usr/src/sys/MYKERN"
***** LONG DELAY OF A FEW MINUTES *****
And then continues as normal.
Full DMESG with power supply on:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #32: Sun Jan 8 17:10:19 GMT 2006
djbrown@bsdlaptop:/usr/obj/usr/src/sys/MYKERN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0878000.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc08781a8.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc0878254.
Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc0878300.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08783b0.
Preloaded elf module "/boot/kernel/acpi_ibm.ko" at 0xc087845c.
Calibrating clock(s) ... i8254 clock: 1193179 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 598062960 Hz
CPU: Intel(R) Pentium(R) M processor 1500MHz (598.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
Features2=0x180<EST,TM2>
real memory = 804651008 (767 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000002f1a9fff, 777539584 bytes (189829 pages)
avail memory = 778113024 (742 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6d20
bios32: Entry = 0xfd750 (c00fd750) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd6e0+0x1f6
pnpbios: Found PnP BIOS data at 0xc00f6da0
pnpbios: Entry = f0000:b614 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
io: <I/O>
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00
00 01 ff 01 00 01 19 01 00 01 2f 01 00 01 34 01
00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01
94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01
VESA: 60 mode(s) found
VESA: v2.0, 32704k memory, flags:0x1, mode table:0xc075c2a2 (1000022)
VESA: ATI MOBILITY RADEON 7500
VESA: ATI Technologies Inc. P7 01.00
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-1R> on motherboard
acpi0: [MPSAFE]
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=33408086)
pcibios: BIOS version 2.10
Found $PIR table, 15 entries at 0xc00fdea0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 2 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 2 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 2 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 2 9 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 2 9 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 2 9 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 2 9 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 9 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 9 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 9 2 B 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 2 8 A 0x68 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 2 dev 0 func 0
AcpiOsDerivePciId: bus 2 dev 0 func 1
AcpiOsDerivePciId: bus 0 dev 29 func 7
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
acpi_ec0: info: new max delay is 60 us
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.29.INTA at func 0: 11
ACPI: Found matching pin for 0.29.INTB at func 1: 11
ACPI: Found matching pin for 0.29.INTC at func 2: 11
ACPI: Found matching pin for 0.29.INTD at func 7: 11
ACPI: Found matching pin for 0.31.INTA at func 1: 255
ACPI: Found matching pin for 0.31.INTB at func 3: 11
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x3340, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base d0000000, size 28, enabled
found-> vendor=0x8086, dev=0x3341, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24c2, revid=0x01
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 00001800, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA:0)
pcib0: slot 29 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x8086, dev=0x24c4, revid=0x01
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD:0)
pcib0: slot 29 INTB routed to irq 11 via \\_SB_.LNKD
found-> vendor=0x8086, dev=0x24c7, revid=0x01
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type 4, range 32, base 00001840, size 5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0)
pcib0: slot 29 INTC routed to irq 11 via \\_SB_.LNKC
found-> vendor=0x8086, dev=0x24cd, revid=0x01
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base c0000000, size 10, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH:0)
pcib0: slot 29 INTD routed to irq 11 via \\_SB_.LNKH
found-> vendor=0x8086, dev=0x2448, revid=0x81
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24cc, revid=0x01
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24ca, revid=0x01
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001860, size 4, enabled
map[24]: type 1, range 32, base 00000000, size 10, memory disabled
found-> vendor=0x8086, dev=0x24c3, revid=0x01
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 00001880, size 5, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0)
pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB
found-> vendor=0x8086, dev=0x24c5, revid=0x01
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001c00, size 8, enabled
map[14]: type 4, range 32, base 000018c0, size 6, enabled
map[18]: type 1, range 32, base c0000c00, size 9, enabled
map[1c]: type 1, range 32, base c0000800, size 8, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0)
pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB
found-> vendor=0x8086, dev=0x24c6, revid=0x01
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00002400, size 8, enabled
map[14]: type 4, range 32, base 00002000, size 7, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0)
pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB
agp0: <Intel 82855 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0
agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xc0100000-0xc01fffff
pcib1: prefetched decode 0xe0000000-0xe7ffffff
ACPI: Found matching pin for 1.0.INTA at func 0: 11
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4c57, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e0000000, size 27, enabled
pcib1: (null) requested memory range 0xe0000000-0xe7ffffff: good
map[14]: type 4, range 32, base 00003000, size 8, enabled
pcib1: (null) requested I/O range 0x3000-0x30ff: in range
map[18]: type 1, range 32, base c0100000, size 16, enabled
pcib1: (null) requested memory range 0xc0100000-0xc010ffff: good
pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA:0)
pcib1: slot 0 INTA routed to irq 11 via \\_SB_.LNKA
drm0: <ATI Radeon LW RV200 Mobility 7500 M7> port 0x3000-0x30ff mem 0xe0000000-0xe7ffffff,0xc0100000-0xc010ffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized radeon 1.19.0 20050911
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem 0xc0000000-0xc00003ff irq 11 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xc0000000
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 8
pcib2: I/O decode 0x4000-0x8fff
pcib2: memory decode 0xc0200000-0xcfffffff
pcib2: prefetched decode 0xe8000000-0xefffffff
pcib2: Subtractively decoded bridge.
ACPI: Found matching pin for 2.0.INTA at func 0: 11
ACPI: Found matching pin for 2.0.INTB at func 1: 11
ACPI: Found matching pin for 2.1.INTA at func 0: 11
ACPI: Found matching pin for 2.2.INTA at func 0: 11
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x104c, dev=0xac55, revid=0x01
bus=2, slot=0, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b0000000, size 12, enabled
pcib2: (null) requested memory range 0xb0000000-0xb0000fff: good
pcib2: matched entry for 2.0.INTA (src \\_SB_.LNKA:0)
pcib2: slot 0 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x104c, dev=0xac55, revid=0x01
bus=2, slot=0, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b1000000, size 12, enabled
pcib2: (null) requested memory range 0xb1000000-0xb1000fff: good
pcib2: matched entry for 2.0.INTB (src \\_SB_.LNKB:0)
pcib2: slot 0 INTB routed to irq 11 via \\_SB_.LNKB
found-> vendor=0x8086, dev=0x101e, revid=0x03
bus=2, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base c0220000, size 17, enabled
pcib2: (null) requested memory range 0xc0220000-0xc023ffff: good
map[14]: type 1, range 32, base c0200000, size 16, enabled
pcib2: (null) requested memory range 0xc0200000-0xc020ffff: good
map[18]: type 4, range 32, base 00008000, size 6, enabled
pcib2: (null) requested I/O range 0x8000-0x803f: in range
pcib2: matched entry for 2.1.INTA (src \\_SB_.LNKA:0)
pcib2: slot 1 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x168c, dev=0x0013, revid=0x01
bus=2, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base c0210000, size 16, enabled
pcib2: (null) requested memory range 0xc0210000-0xc021ffff: good
pcib2: matched entry for 2.2.INTA (src \\_SB_.LNKC:0)
pcib2: slot 2 INTA routed to irq 11 via \\_SB_.LNKC
cbb0: <TI1520 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac55104c 0x02100107 0x06070001 0x00824008
0x10: 0xb0000000 0x020000a0 0xb0050302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0x05121014 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0844d071 0x00000000 0x00000000 0x01d21022
0x90: 0x406402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000001 0x0000000f
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1520 PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 11 at device 0.1 on pci2
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb1000000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0xac55104c 0x02100107 0x06070001 0x00824008
0x10: 0xb1000000 0x020000a0 0xb0080602 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020b
0x40: 0x05121014 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0844d071 0x00000000 0x00000000 0x01d21022
0x90: 0x406402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000001 0x0000000f
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci2: <network, ethernet> at device 1.0 (no driver attached)
ath0: <Atheros 5212> mem 0xc0210000-0xc021ffff irq 11 at device 2.0 on pci2
ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xc0210000
ath0: [MPSAFE]
ath0: bpf attached
ath0: Ethernet address: 00:11:f5:2c:ce:87
ath0: bpf attached
ath0: bpf attached
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 5.9 phy 4.3 radio 4.6
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1860
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xc0000c00-0xc0000dff,0xc0000800-0xc00008ff irq 11 at device 31.5 on pci0
pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xc0000c00
pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xc0000800
pcm0: [MPSAFE]
pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 2eed0000, 4000; 0xee413000 -> 2eed0000
pcm0: sndbuf_setmap 2eecc000, 4000; 0xee417000 -> 2eecc000
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 598062960 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
battery0: battery initialization start
acpi_acad0: acline initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
atapicam: atapicam0 already exists; skipping it
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ad0: setting PIO4 on Intel ICH4 chip
battery0: battery initialization done, tried 1 times
ad0: setting UDMA100 on Intel ICH4 chip
ad0: 35133MB <HTS548040M9AT00 MG2OA55A> at ata0-master UDMA100
ad0: 71953394 sectors [71382C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on Intel ICH4 chip
acd0: setting UDMA33 on Intel ICH4 chip
acd0: <UJDA745 DVD/CDRW/1.03> CDRW drive at ata1 as master
acd0: read 689KB/s (4134KB/s) write 2755KB/s (2755KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 48008 Hz, will use 48000 Hz
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <MATSHITA UJDA745 DVD/CDRW 1.03> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
GEOM: new disk cd0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA UJDA745 DVD/CDRW 1.03> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
>How-To-Repeat:
Boot an IBM T40 without the power supply disconnected
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200601101921.k0AJLgen073384>