From owner-freebsd-stable  Sat Feb 10 17:37:31 2001
Delivered-To: freebsd-stable@freebsd.org
Received: from cs.utep.edu (mail.cs.utep.edu [129.108.5.3])
	by hub.freebsd.org (Postfix) with ESMTP id 2A52F37B69D
	for <stable@FreeBSD.ORG>; Sat, 10 Feb 2001 17:37:03 -0800 (PST)
Received: from gecko (gecko [129.108.5.51])
	by cs.utep.edu (8.11.2/8.11.2) with ESMTP id f1B1akl15348;
	Sat, 10 Feb 2001 18:36:46 -0700 (MST)
Date: Sat, 10 Feb 2001 18:36:48 -0700 (MST)
From: <janb@cs.utep.edu>
X-Sender:  <janb@gecko>
To: Eric Jacoboni <jaco@teaser.fr>
Cc: <stable@FreeBSD.ORG>
Subject: Re: ata driver and HighPoint HPT370 ATA100 controller
In-Reply-To: <86vgqigi6j.fsf@titine.fr.eu.org>
Message-ID: <Pine.GSO.4.30.0102101836220.16559-100000@gecko>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=X-UNKNOWN
Content-Transfer-Encoding: QUOTED-PRINTABLE
Sender: owner-freebsd-stable@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.ORG

As far as I know, you have to set a jumper on the plextor drive to enable
the UDMA mode.

JAn

On 11 Feb 2001, Eric Jacoboni wrote:

> Hi,
>
> I've got my new machine with a Abit KT7A-RAID motherboard. All runs ok
> except something i dont understand with the ata driver.
>
> My box is all IDE : IBM DTLA hard drive as primary master, CDROM as
> secondary master and CD-RW Plextor 12/10/32A as primary master on the
> second IDE controller (HighPoint HPT370 ATA100).
>
> At boot, i get the following messages :
>
> ad0: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata0-master tagged UDMA66
> acd0: CDROM <ATAPI 50X CDROM> at ata1-master using UDMA33
> acd1: CD-RW <PLEXTOR CD-R PX-W1210A> at ata2-master using PIO4
>
> Why the Plextor is not recognized as UDMA ?
>
> I've try to change that with sysctl -w hw.atamodes but... no way.
>
> My kernel config file contains the following related lines :
>
> device          ata
> device          atadisk
> device          atapicd
>
> options         ATA_STATIC_ID
> options         ATA_STATIC_ID
> options         ATA_ENABLE_ATAPI_DMA
> options         ATA_ENABLE_TAGS
>
> Furthermore, i ask this question because i wonder if my problems with
> burning audio CDs that are inaudible is not related : i've read in the
> -questions archives that someone has solved the same burning pb when
> its CD-RW was recognized as WDMA2 instead of PIO4
>
> I've put the CD-RW on the second controller because i wanted it was
> alone on its port (and, then, master)... Maybe i'm wrong ?
>
>         Thanks for you help, i'm really getting fed up with rebooting Win=
dows
>         only to burn Audio CD...
> --
> =C9ric Jacoboni, n=E9 il y a 1285212400 secondes.
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
>



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message