Date: Wed, 21 May 2003 04:11:26 GMT From: jimd_NOSPAM@siu.edu To: FreeBSD-gnats-submit@FreeBSD.org Subject: i386/52519: request USB-2.x support Message-ID: <200305210411.h4L4BQqM001146@freebsd2.localnet10> Resent-Message-ID: <200305210910.h4L9A70O085570@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 52519 >Category: i386 >Synopsis: request USB-2.x support >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: change-request >Submitter-Id: current-users >Arrival-Date: Wed May 21 02:10:06 PDT 2003 >Closed-Date: >Last-Modified: >Originator: J.D. >Release: FreeBSD 5.1-BETA i386 >Organization: >Environment: System: FreeBSD 5.1-BETA #3: Tue May 20 05:46:11 CDT 2003 localhost:/usr/src/sys/i386/compile/XSYSTEM i386 usbdevs addr 1: OHCI root hub, SiS addr 1: OHCI root hub, SiS freebsd2/ttyp0/root: usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00 port 1 powered port 2 powered port 3 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00 port 1 powered port 2 powered port 3 powered [part of dmesg.boot] ohci0: <SiS 5571 USB controller> mem 0xdfffc000-0xdfffcfff irq 5 at device 3.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xdfffd000-0xdfffdfff irq 11 at device 3.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered pci0: <serial bus, USB> at device 3.3 (no driver attached) >Description: I have had several motherboards that support USB-2.x but FBSD-4.x/5.x do not appear to yet provide USB-2.x support. I believe that this would be driven by an EHCI controller rather than OHCI. >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200305210411.h4L4BQqM001146>