From owner-aic7xxx Thu Jul 13 11:28:48 2000 Delivered-To: aic7xxx@freebsd.org Received: from renoir.artselect.com (renoir.artselect.com [208.145.206.91]) by hub.freebsd.org (Postfix) with ESMTP id 1E82337C55E for ; Thu, 13 Jul 2000 11:28:44 -0700 (PDT) (envelope-from harlan@artselect.com) Received: from davinci.artselect.com (davinci.artselect.com [192.168.2.32]) by renoir.artselect.com (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id NAA16809; Thu, 13 Jul 2000 13:28:42 -0500 Received: (from harlan@localhost) by davinci.artselect.com (8.9.3/8.9.3/Debian 8.9.3-21) id NAA13067; Thu, 13 Jul 2000 13:28:41 -0500 From: Pete Harlan Message-Id: <200007131828.NAA13067@davinci.artselect.com> Subject: Re: Problems with Adaptec 29160..... In-Reply-To: <8C481B317D91D31191E400600862AB1808DED2@DBAMAIL> from Steffen Hansen at "Jul 12, 2000 10:54:56 am" To: Steffen Hansen Date: Thu, 13 Jul 2000 13:28:41 -0500 (CDT) Cc: "'aic7xxx@freebsd.org'" X-Mailer: ELM [version 2.4ME+ PL66 (25)] Sender: owner-aic7xxx@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I have one too (an Adaptec 29160) and it works with Linux's test1-ac4 (which is version 5.2.0) but none of the kernels after that AFAICT (which use 5.2.1). I've been trying to track this down, or use development drivers (which are somewhere presumably...?) but I'm out of town at the moment without access to my machine. Let me know if you get it working, or if a developer needs a loaner card to test with. (Which Adaptec ought to provide...) -- Pete Harlan harlan@artselect.com [Charset iso-8859-1 unsupported, filtering to ASCII...] > Hi.... And btw. I'm new so bear with me.... > > I'm trying to install a new Linux RH6.2/Oracle > server with an Adaptec 29160 controller. So far > there's only two IBM18.5Gig drives attached to > the controller, but more will follow. > > The installation of RH6.2 causes no problems, > but when RH6.2 boots the std. SMP kernel, the > following messages appears when the Adaptec > driver loads : > ---------------------------------------------------------------------------- > > (scsi0) found at PCI 0/16/0 > (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs > (scsi0) Downloaded sequencer code... 392 instructions downloaded > scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0 > > scsi : 1 host > scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun > 0 In > quiry 00 00 00 ff 00 > (scsi0) BRKADRINT error (0xff): > Illegal Host Access > Illegal Sequencer address referenced > Illegal Opcode in sequencer program > Sequencer Ram Parity Error > Data-Path Ram Parity Error > Scratch Ram/SCB Array Ram Parity Error > PCI Error detected > CIOBUS Parity Error > (scsi0) SEQADDR=0x1ff > Kernel panic: aic7xxx: unrecoverable BRKADRINT > > In interrupt handler - not syncing > > ---------------------------------------------------------------------------- > > This happens with the std. SMP kernel as well as with > Kernel 2.4.0-test1/2 > The driver version in the 2.2.14 kernel is 5.1.28 and 2.4.0 > reports 5.2.1... > > It does NOT however die when using the linux-up kernel > that comes with RH6.2..... > > I hope that you're able to help me... > > Kindest regards and tanx in advance.. > > Steffen Hansen > Den Bl_ Avis A/S, Denmark > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe aic7xxx" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe aic7xxx" in the body of the message