Date: Wed, 4 Jun 2008 19:13:36 +1000 From: Jerahmy Pocott <quakenet1@optusnet.com.au> To: freebsd-questions@freebsd.org Subject: DVD Writer problems Message-ID: <E889E8D2-1075-40BE-958D-D109D68AEC2A@optusnet.com.au>
next in thread | raw e-mail | index | archive | help
Hello, I'v been having problems getting this DVD drive working at all, I'm running on 6.3 p1.. On boot it is detected as: acd0: DMA limited to UDMA33, controller found non-ATA66 cable acd0: DVDR <ATAPI DVD A DH20A4P/9P57> at ata0-master UDMA33 Which is the first sign of trouble, it is connected by an ATA66 capable cable and I'v tried swapping over the cable to rule out a faulty cable and the message is the same. It is connected to: atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 When trying to use burncd on it, the drives light flashes for a while then after a delay I get: acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00 On the console and any further attempt to use the drive results in that message being repeated without any delay, also trying to use the atapiscsi device results in a similar message: acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 Any thoughts on what problem here is? It seems that the controller isn't working properly with it? Cheers, J.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E889E8D2-1075-40BE-958D-D109D68AEC2A>