From owner-freebsd-hardware Sun Nov 7 9:33:12 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from mail.netaxs.com (mail.netaxs.com [207.8.186.26]) by hub.freebsd.org (Postfix) with ESMTP id 58AB314BE4 for ; Sun, 7 Nov 1999 09:33:04 -0800 (PST) (envelope-from bleez@netaxs.com) Received: from dyn-7.blackbox-2.netaxs.com (dyn-7.blackbox-2.netaxs.com [207.106.60.7]) by mail.netaxs.com (8.8.7/8.8.5) with ESMTP id MAA19558 for ; Sun, 7 Nov 1999 12:33:02 -0500 (EST) Date: Sun, 7 Nov 1999 12:33:00 -0500 (EST) From: Bryan Liesner Reply-To: Bryan Liesner To: freebsd-hardware@freebsd.org Subject: Promise Ultra66 / second IDE channel Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm running 4.0 current cvsupped as of Nov 6. I'm having a problem getting an ATAPI CDROM (master) and HP Colorado 8G (slave) to probe using the second channel on a Promise Ultra66 card. During boot, it will set up my hard drives on the first channel, then it will hang for a few seconds, not finding the CDROM/Tape combo plugged into the secondary slot. I know support for the card is kind of new, and there is an improvement. Before Soren's Nov 6 changes, this configuration would cause a kernel panic. Any enlightenment would be welcome. Here's a few relevant dmesg lines: ata-pci0: irq 11 at device 5.0 on pci0 ata-pci0: Busmastering DMA supported ata2 at 0xeff0 irq 11 on ata-pci0 ata3 at 0xefa8 irq 11 on ata-pci0 ad0: ATA-4 disk at ata2 as master ad0: 8693MB (17803440 sectors), 17662 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 31 depth queue, UDMA66 Creating DISK ad0 Creating DISK wd0 ad1: ATA-? disk at ata2 as slave ad1: 2441MB (4999680 sectors), 4960 cyls, 16 heads, 63 S/T, 512 B/S ad1: 16 secs/int, 0 depth queue, DMA Creating DISK ad1 Creating DISK wd1 Mounting root from ufs:/dev/wd0s1a To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message