Date: Wed, 05 May 1999 21:45:15 +0900 From: Jun Kuriyama <kuriyama@sky.rim.or.jp> To: FreeBSD Mobile <freebsd-mobile@FreeBSD.ORG> Subject: Memory Stick Message-ID: <37303D5B.39BFA86E@sky.rim.or.jp>
next in thread | raw e-mail | index | archive | help
$B!!(BSONY VAIO PCG-Z505D $B$KFbB"$N(B Memory Stick $B%9%m%C%H$O$3$s$J46$8$K8+$($^(B
$B$9!#(B16MB $B$N%a%G%#%"$r;X$79~$s$@>uBV!#(B
> wdc1 at 0x170-0x177 irq 15 on isa
> wdc1: unit 0 (wd1): <MEMORYSTICK 16M 16K>
> wd1: 15MB (31680 sectors), 495 cyls, 4 heads, 16 S/T, 512 B/S
$B!!$3$l$r(B
# mount -t msdos /dev/wd1s1 /mnt
$B$H$+$9$k$H%^%&%s%H$G$-$^$9!#%a%G%#%">e$K%i%$%H%W%m%F%/%HMQ$N%9%$%C%A$,$"(B
$B$k$s$G$9$,!"$3$l$r=q9~$_6X;_$K$7$F$b0UL#L5$$$_$?$$!#$^$s$^=q$-9~$a$k!#(B
$B!!0l2s%i%$%H%W%m%F%/%H$K$7$F=q$-9~$b$&$H$7$?$i(B I/O failure ($B:F8=$G$-$J$$(B
$B$N$G$&$m3P$((B)$B$@$+$,=P$F!"$=$l$r(B umount $B$7$h$&$H$7$?$i(B OS $B$4$H8G$^$C$F$7(B
$B$^$C$?;v$,$"$j$^$7$?!#(B
$B!!$b$R$H$D!"(BMemory Stick $B$N(B PC Card Adaptor $B$G$"$k(B SONY $B$N(B MSAC-PC1 $B$H$$(B
$B$&$d$D!#$3$l$N(B dumpcis $B$O(B
> leda: {101} pccardc dumpcis
> Configuration data for card in slot 0
> Tuple #1, code = 0x1 (Common memory descriptor), length = 4
> 000: df 4a 01 ff
> Common memory device information:
> Device number 1, type Function specific, WPS = ON
> Speed = 4.0 x 100 ns, Memory block size = reserved, 32 units
> Device number 2, type No device, WPS = OFF
> Speed = No speed, Memory block size = 512b, 1 units
> Tuple #2, code = 0x1c (Other conditions for common memory), length = 4
> 000: 02 d9 01 ff
> (3V card)
> Tuple #3, code = 0x18 (JEDEC descr for common memory), length = 2
> 000: df 01
> Tuple #4, code = 0x20 (Manufacturer ID), length = 4
> 000: f1 00 00 00
> PCMCIA ID = 0xf1, OEM ID = 0x0
> Tuple #5, code = 0x15 (Version 1 info), length = 30
> 000: 04 01 53 4f 4e 59 00 4d 45 4d 4f 52 59 53 54 49
> 010: 43 4b 28 20 31 36 4d 29 00 31 2e 30 00 ff
> Version = 4.1, Manuf = [SONY], card vers = [MEMORYSTICK( 16M)]
> Addit. info = [1.0]
> Tuple #6, code = 0x21
> Tuple #6, code = 0x21 (Functional ID), length = 2
> 000: 04 01
> Fixed disk card - POST initialize
> Tuple #7, code = 0x22 (Functional EXT), length = 2
> 000: 01 01
> Disk interface: IDE
> Tuple #8, code = 0x22 (Functional EXT), length = 3
> 000: 02 0c 0f
> Disk features: Silicon, Unique, Single
> Sleep, Standby, Idle, Low power,
> Tuple #9, code = 0x1a (Configuration map), length = 5
> 000: 01 03 00 02 0f
> Reg len = 2, config register addr = 0x200, last config = 0x3
> Registers: XXXX----
> Tuple #10, code = 0x1b (Configuration entry), length = 8
> 000: c0 c0 a1 01 55 08 00 20
> Config index = 0x0(default)
> Interface byte = 0xc0 (memory) +RDY/-BSY active, wait signal supported
> Vcc pwr:
> Nominal operating supply voltage: 5 x 1V
> Memory space length = 0x8
> Max twin cards = 0
> Misc attr: (Power down supported)
> Tuple #11, code = 0x1b (Configuration entry), length = 6
> 000: 00 01 21 b5 1e 0e
> Config index = 0x0
> Vcc pwr:
> Nominal operating supply voltage: 3 x 1V, ext = 0x1e
> Max current average 0x1e
> Max current averagee over 10 ms: 1.2 x 100mA
> Tuple #12, code = 0x1b (Configuration entry), length = 10
> 000: c1 41 99 01 55 64 f0 ff ff 20
> Config index = 0x1(default)
> Interface byte = 0x41 (I/O) +RDY/-BSY active
> Vcc pwr:
> Nominal operating supply voltage: 5 x 1V
> Card decodes 4 address lines, full 8/16 Bit I/O
> IRQ modes: Level, Pulse, Shared
> IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
> Max twin cards = 0
> Misc attr: (Power down supported)
> Tuple #13, code = 0x1b (Configuration entry), length = 6
> 000: 01 01 21 b5 1e 4d
> Config index = 0x1
> Vcc pwr:
> Nominal operating supply voltage: 3 x 1V, ext = 0x1e
> Max current average over 10 ms: 4.5 x 10mA
> Tuple #14, code = 0x1b (Configuration entry), length = 15
> 000: c2 41 99 01 55 ea 61 f0 01 07 f6 03 01 ee 20
> Config index = 0x2(default)
> Interface byte = 0x41 (I/O) +RDY/-BSY active
> Vcc pwr:
> Nominal operating supply voltage: 5 x 1V
> Card decodes 10 address lines, full 8/16 Bit I/O
> I/O address # 1: block start = 0x1f0 block length = 0 = 0x1f0 bl
> ock length = 0x8
> I/O address # 2: block start = 0x3f6 block length = 0x2
> IRQ modes: Level, Pulse, Shared
> IRQ level = 14
> Max twin cards = 0
> Misc attr: (Power down supported)
> Tuple #15, code = 0x1b (Configuration entry), length = 6
> 000: 02 01 21 b5 1e 4d
> Config index = 0x2
> Vcc pwr:
> Nominal operating supply voltage: 3 x 1V, ext = 0x1e
> Max current average over 10 ms: 4.5 x 10mA
> Tuple #16, code = 0x1b (Configuration entry), length = 15
> 000: c3 41 99 01 55 ea 61 70 01 07 76 03 01 ee 20
> Config index = 0x3(default)
> Interface byte = 0x41 (I/O) +RDY/-BSY active
> Vcc pwr:
> Nominal operating supply voltage: 5 x 1V
> Card decodes 10 address lines, full 8/16 Bit I/O
> I/O address # 1: block start = 0x170 block length = 0x8
> I/O address # 2: block start = 0x376 block length = 0x2
> IRQ modes: Level, Pulse, Shared
> IRQ level = 14
> Max twin cards = 0
> Misc attr: (Power down supported)
> Tuple #17, code = 0x1b (Configuration entry), length = 6
> 000: 03 01 21 b5 1e 4d
> Config index = b5 1e 4d
> Config index = 0x3
> Vcc pwr:
> Nominal operating supply voltage: 3 x 1V, ext = 0x1e
> Max current average over 10 ms: 4.5 x 10mA
> Tuple #18, code = 0x14 (No link), length = 0
> Tuple #19, code = 0xff (Terminator), length = 0
> 1 slots found
$B$H$$$&46$8!#(B/etc/pccard.conf $B$K(B
> io 0x240-0x2e0 0x300-0x360
> memoryy 0xd4000 96k
>
> card "SONY" "MEMORYSTICK\( 16M\)"
> config 0x3 "wdc1" 7
> insert echo SONY Memory Stick inserted
> remove echo SONY Memory Stick removed
$B$H$7$F$_$?$N$G$9$,!"(BResource allocation failure $B$N(B Reason I/O block
allocation failed $B$C$F1>$o$l$F$&$^$/$$$-$^$;$s$G$7$?!#$=$l0JA0$K(B Flash
ATA $B$H$+;H$C$?;vL5$$$N$G8+Ev30$l$N$3$H$r$7$F$$$k$h$&$J5$$,$9$k$1$I!#(B
$B!!(Bwdc1 $B$N(B wd1 $B$,(B Memory Stick $B$N%9%m%C%H$G$9$G$K;H$o$l$A$c$C$F$k$N$,$$$+(B
$B$s$N$+$J!#(B
--
$B$/$j$d$^(B // kuriyama@sky.rim.or.jp
// kuriyama@FreeBSD.ORG
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37303D5B.39BFA86E>