Date: Mon, 24 Sep 2001 15:45:38 -0700 From: "Matthew Feadler" <thetrueelf@hotmail.com> To: freebsd-questions@freebsd.org Subject: ums0 not configured Message-ID: <LAW2-F105YI9IJsaJbq0000f672@hotmail.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_2fa0_2090_3899 Content-Type: text/plain; format=flowed Greetings all, I'm having trouble getting my Intellimouse Explorer to work under 4.4-RELEASE. My dmesg output is attached to this email as dmesg.txt. As far as I can tell, the kernel is compiled properly, and the necessary controllers initialize (uhci, etc.). I've also triple-checked my rc.conf and it's just as the Handbook indicates it should be. Finally, I've verified that the device node for ums0 exists. The problem is thus: When moused attempts to initialize, it returns the error: /dev/ums0: device not configured I get a nearly identical error when I cat /dev/ums0. Initially, both USB and my NIC were being assigned IRQ11, so I disabled BIOS IRQ assignment to USB. I can't see that it's made any difference, as the device messages have remained as they were. Any help will be greatly appreciated, -ELf ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ "Nonchalantly," said the poet, "For if you wear your gravity, you'll have nothing left to show." _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp ------=_NextPart_000_2fa0_2090_3899 Content-Type: text/plain; name="dmesg.txt"; format=flowed Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001 murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) Processor (800.04-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> real memory = 402587648 (393152K bytes) config> di sn0 config> di lnc0 config> di ie0 config> di fe0 config> di cs0 config> di bt0 config> di aic0 config> di aha0 config> di adv0 config> q avail memory = 387149824 (378076K bytes) Preloaded elf kernel "kernel" at 0xc0480000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc048009c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fde50 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq 10 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA66 controller> port 0xe400-0xe40f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 0 at device 7.2 on pci0 pci_cfgintr_search: linked (5) to configured irq 12 at 0:15:0 pci_cfgintr: 0:7 INTD routed to irq 12 usb0: cannot start uhci0: USB init failed device_probe_and_attach: uhci0 attach returned 5 uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f at device 7.3 on pci0 pci_cfgintr_search: linked (5) to configured irq 12 at 0:15:0 pci_cfgintr: 0:7 INTD routed to irq 12 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered dc0: <ADMtek AN985 10/100BaseTX> port 0x8800-0x88ff mem 0xdb000000-0xdb0003ff irq 11 at device 11.0 on pci0 dc0: Ethernet address: 00:03:6d:16:04:63 miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <unknown card> (vendor=0x1102, dev=0x0002) at 15.0 irq 12 pci0: <unknown card> (vendor=0x1102, dev=0x7002) at 15.1 pcib1: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xcc000-0xcffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: parallel port not found. ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable ad0: 12971MB <WDC WD136AA> [26354/16/63] at ata0-master UDMA33 acd0: CD-RW <SAF CD-RW6424A> at ata0-slave using PIO3 acd1: CDROM <CD-ROM Drive/F5D> at ata1-master using PIO4 Mounting root from ufs:/dev/ad0s2a ------=_NextPart_000_2fa0_2090_3899-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?LAW2-F105YI9IJsaJbq0000f672>