Date: Fri, 9 Aug 2013 10:27:15 -0600 From: Warner Losh <imp@bsdimp.com> To: lev@FreeBSD.org Cc: freebsd-embedded@FreeBSD.org Subject: Re: Using ttyu2 as Serial console -- how could I specify this to boot and loader? Message-ID: <1E175195-5A2F-417A-B989-BF7DB66979DA@bsdimp.com> In-Reply-To: <87215828.20130809124922@serebryakov.spb.ru> References: <87215828.20130809124922@serebryakov.spb.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Aug 9, 2013, at 2:49 AM, Lev Serebryakov wrote: > Hello, Freebsd-current. >=20 > I want to use ttyu0 on my Intel D2500CC motherboard (it has 4 serial = ports, > but looks like ports COM1 and COM2 are on headers and I don't have = place for > connector on my small case, and COM3 and COM4 are on I/O shield of = MoBo) as > my boot console -- is it possible? "-h" option to boot and > console=3D"comconsole" in loader.conf doesn't specify port to use, and > device.hints (where I could set flags to uart devices) are used by = kernel > only... You need to set the flags hint on the com port you want to be the = console. Warner
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1E175195-5A2F-417A-B989-BF7DB66979DA>