From owner-freebsd-hackers Fri Nov 13 01:33:42 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id BAA13874 for freebsd-hackers-outgoing; Fri, 13 Nov 1998 01:33:42 -0800 (PST) (envelope-from owner-freebsd-hackers@FreeBSD.ORG) Received: from labinfo.iet.unipi.it (labinfo.iet.unipi.it [131.114.9.5]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id BAA13760 for ; Fri, 13 Nov 1998 01:30:46 -0800 (PST) (envelope-from luigi@labinfo.iet.unipi.it) Received: from localhost (luigi@localhost) by labinfo.iet.unipi.it (8.6.5/8.6.5) id HAA11473; Fri, 13 Nov 1998 07:50:04 +0100 From: Luigi Rizzo Message-Id: <199811130650.HAA11473@labinfo.iet.unipi.it> Subject: Re: pnp/booting problem with new kernel To: tom@tomqnx.com (Tom Torrance at home) Date: Fri, 13 Nov 1998 07:50:03 +0100 (MET) Cc: hackers@FreeBSD.ORG In-Reply-To: from "Tom Torrance at home" at Nov 13, 98 02:34:20 am X-Mailer: ELM [version 2.4 PL23] Content-Type: text Sender: owner-freebsd-hackers@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > It appears that when a new kernel is installed, the effects of the last > pnp statement issued are lost. correct. They are stored in the current kernel with "dset". If you want something persistent you have to put the commands below in /kernel.config and use option USERCONFIG_BOOT (the first line of /kernel.config should be "USERCONFIG" , the last one "quit" cheers luigi > When I initially booted this kernel, I did: > pnp 1 0 enable os port0 0x220 port1 0x300 port2 0x388 irq0 10 drq0 3 drq1 5 > pnp 1 1 enable os port0 0x200 > pnp 1 2 enable os port0 0x620 port1 0xa20 port2 0xe20 > (see attachment 1 for the dmesg) > > This works fine for all subsequent boots, until after I install a new kernel. > At that time, it appears that the effects of the LAST pnp statement issued > are lost. The effects of the previously issued pnp statements are still > accurately processed (see attachment 2 for the dmesg). > > Am I misunderstanding how this should work? > > Tom > > > > --ELM910942479-25570-0_ > Content-Type: text/plain; charset=ISO-8859-1 > Content-Disposition: attachment; filename=pnp0 > Content-Description: original dmesg > Content-Transfer-Encoding: 7bit > > DMESG after pnp statements are entered: > > a fifo > ncr0: single-ended, open drain IRQ driver, using on-chip SRAM > found-> vendor=0x5333, dev=0x8a01, revid=0x01 > class=03-00-00, hdrtype=0x00, mfdev=0 > subordinatebus=0 secondarybus=0 > intpin=a, irq=11 > map[0]: type 1, range 32, base e0000000, size 26 > vga0: rev 0x01 int a irq 11 on pci0.11.0 > Probing for PnP devices: > Trying Read_Port at 203 > Trying Read_Port at 243 > PnP: CSN 1 COMP_DEVICE_ID = 0x2fb0d041 > CSN 1 Vendor ID: CTL00c1 [0xc1008c0e] Serial 0x1641e094 Comp ID: PNPb02f [0x2fb0d041] > PnP: override config for CSN 1 LDN 0 vend_id 0xc1008c0e > port 0x0220 0x0300 0x0388 0x0000 irq 10:0 drq 3:5 en 1 > PnP: override config for CSN 1 LDN 1 vend_id 0xc1008c0e > port 0x0200 0x0000 0x0000 0x0000 irq 0:0 drq 4:4 en 1 > PnP: override config for CSN 1 LDN 2 vend_id 0xc1008c0e > port 0x0620 0x0000 0x0000 0x0000 irq 0:0 drq 4:4 en 1 > Called nullpnp_probe with tag 0x00000001, type 0xc1008c0e > Called nullpnp_probe with tag 0x00000001, type 0x2fb0d041 > Probing for devices on the ISA bus: > video: RTC equip. code:0x0f, DCC code:0x09 > video: CRTC:0x3d4, video option:0x60, rows:80, cols:25, font height:16 > video: param table EGA/VGA:0xf00c4644, CGA/MDA:0 > video: rows_offset:1 > video#0: adapter type:VGA (5), flags:0x7f, CRTC:0x3d4 > video#0: init mode:24, bios mode:3, current mode:24 > video#0: window:0xf00b8000 size:32k gran:32k, buf:0xf0000000 size:0k > video#0: mode:0, flags:0x1 T 40x25, font:8x8, win:0xb8000 > video#0: mode:1, flags:0x1 T 40x25, font:8x8, win:0xb8000 > video#0: mode:2, flags:0x1 T 80x25, font:8x8, win:0xb8000 > video#0: mode:3, flags:0x1 T 80x25, font:8x8, win:0xb8000 > video#0: mode:19, flags:0x1 T 40x25, font:8x14, win:0xb8000 > video#0: mode:20, flags:0x1 T 40x25, font:8x14, win:0xb8000 > video#0: mode:21, flags:0x1 T 80x25, font:8x14, win:0xb8000 > video#0: mode:22, flags:0x1 T 80x25, font:8x14, win:0xb8000 > video#0: mode:23, flags:0x1 T 40x25, font:8x16, win:0xb8000 > video#0: mode:25, flags:0x0 T 80x25, font:8x16, win:0xb0000 > video#0: mode:24, flags:0x1 T 80x25, font:8x16, win:0xb8000 > video#0: mode:7, flags:0x0 T 80x25, font:8x14, win:0xb0000 > video#0: mode:112, flags:0x1 T 80x43, font:8x8, win:0xb8000 > video#0: mode:113, flags:0x1 T 80x43, font:8x8, win:0xb8000 > video#0: mode:33, flags:0x0 T 80x30, font:8x16, win:0xb0000 > video#0: mode:32, flags:0x1 T 80x30, font:8x16, win:0xb8000 > video#0: mode:31, flags:0x0 T 80x50, font:8x8, win:0xb0000 > video#0: mode:30, flags:0x1 T 80x50, font:8x8, win:0xb8000 > video#0: mode:35, flags:0x0 T 80x60, font:8x8, win:0xb0000 > video#0: mode:34, flags:0x1 T 80x60, font:8x8, win:0xb8000 > video#0: mode:4, flags:0x3 G 320x200x2, 1 plane(s), font:8x8, win:0xb8000 > video#0: mode:5, flags:0x3 G 320x200x2, 1 plane(s), font:8x8, win:0xb8000 > video#0: mode:6, flags:0x3 G 640x200x1, 1 plane(s), font:8x8, win:0xb8000 > video#0: mode:13, flags:0x3 G 320x200x4, 4 plane(s), font:8x8, win:0xa0000 > video#0: mode:14, flags:0x3 G 640x200x4, 4 plane(s), font:8x8, win:0xa0000 > video#0: mode:15, flags:0x2 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000 > video#0: mode:17, flags:0x2 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000 > video#0: mode:16, flags:0x3 G 640x350x2, 2 plane(s), font:8x14, win:0xa0000 > video#0: mode:18, flags:0x3 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000 > video#0: mode:26, flags:0x3 G 640x480x4, 4 plane(s), font:8x16, win:0xa0000 > video#0: mode:27, flags:0x3 G 640x480x4, 4 plane(s), font:8x16, win:0xa0000 > video#0: mode:28, flags:0x3 G 320x200x8, 1 plane(s), font:8x8, win:0xa0000 > video#0: mode:37, flags:0x3 G 320x240x8, 1 plane(s), font:8x8, win:0xa0000 > VGA parameters upon power-up > 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > VGA parameters in BIOS for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > EGA/VGA parameters to be used for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > sc0: the current keyboard controller command byte 0047 > kbdio: DIAGNOSE status:0055 > kbdio: TEST_KBD_PORT status:0000 > kbdio: RESET_KBD return code:00fa > kbdio: RESET_KBD status:00aa > sc0: keyboard device ID: ab41 > sc0 at 0x60-0x6f irq 1 on motherboard > sc0: VGA color <16 virtual consoles, flags=0x0> > sio0: irq maps: 0x401 0x411 0x401 0x401 > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > sio0: type 16550A > lpt0 at 0x378-0x37f irq 7 on isa > lpt0: Interrupt-driven port > lp0: TCP/IP capable interface > bpf: lp0 attached > psm0: current command byte:0047 > kbdio: TEST_AUX_PORT status:0000 > kbdio: RESET_AUX return code:00fa > kbdio: RESET_AUX status:00aa > kbdio: RESET_AUX ID:0000 > psm: status 00 02 64 > psm: status 00 00 64 > psm: status 00 03 64 > psm: status 00 03 64 > psm: status 10 00 64 > psm: data 08 00 00 > psm: data 08 00 00 > psm: status 00 02 64 > psm0 at 0x60-0x64 irq 12 on motherboard > psm0: model Generic PS/2 mouse, device ID 0, 2 buttons > psm0: config:00000000, flags:00000000, packet size:3 > psm0: syncmask:c0, syncbits:00 > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > fdc0: FIFO enabled, 8 bytes threshold > fd0: 1.44MB 3.5in > wdc0 at 0x1f0-0x1f7 irq 14 on isa > wdc0: unit 0 (wd0): > wd0: 4110MB (8418816 sectors), 14848 cyls, 9 heads, 63 S/T, 512 B/S > wd0: ATA INQUIRE valid = 0007, dmamword = 0007, apio = 0003, udma = 0407 > wdc1 at 0x170-0x177 irq 15 on isa > wdc1: unit 0 (atapi): , removable, intr, iordy > wcd0: 689KB/sec, 256KB cache, audio play, 255 volume levels, ejectable tray > wcd0: 120mm audio disc loaded, unlocked > 1 3C5x9 board(s) on ISA found at 0x210 > ep0 at 0x210-0x21f irq 5 on isa > ep0: aui/bnc[*BNC*] address 00:60:8c:62:a5:65 > bpf: ep0 attached > sb0 at 0x220 irq 10 drq 3 on isa > snd0: > sbxvi0 at ? drq 5 on isa > snd0: > sbmidi0 at 0x300 on isa > snd0: > awe0 at 0x620 on isa > awe0: > opl0 at 0x388 on isa > snd0: > joy0 at 0x200 on isa > joy0: joystick > npx0 on motherboard > npx0: INT 16 interface > i586_bzero() bandwidth = 175654312 bytes/sec > bzero() bandwidth = 88409512 bytes/sec > imasks: bio c008c040, tty c0031092, net c0060020 > BIOS Geometries: > 0:020afe3f 0..522=523 cylinders, 0..254=255 heads, 1..63=63 sectors > 1:03fd893f 0..1021=1022 cylinders, 0..137=138 heads, 1..63=63 sectors > 0 accounted for > Device configuration finished. > Intel Pentium F00F detected, installing workaround > bpf: tun0 attached > bpf: tun1 attached > bpf: tun2 attached > bpf: tun3 attached > bpf: lo0 attached > Waiting 15 seconds for SCSI devices to settle > ncr0: restart (scsi reset). > (probe5:ncr0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0 > (probe5:ncr0:0:5:0): ILLEGAL REQUEST asc:24,0 > (probe5:ncr0:0:5:0): Invalid field in CDB sks:c0,1 > pass0 at ncr0 bus 0 target 0 lun 0 > pass0: Fixed Direct Access SCSI2 device > pass0: Serial Number JKA5580002KB3M > pass0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled > pass1 at ncr0 bus 0 target 5 lun 0 > pass1: Removable CD-ROM SCSI2 device > pass1: 3.300MB/s transfers > da0 at ncr0 bus 0 target 0 lun 0 > da0: Fixed Direct Access SCSI2 device > da0: Serial Number JKA5580002KB3M > da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled > da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) > cd0 at ncr0 bus 0 target 5 lun 0 > cd0: Removable CD-ROM SCSI2 device > cd0: 3.300MB/s transfers > cd0: cd present [327689 x 2048 byte records] > Considering FFS root f/s. > changing root device to da0s1a > da0s1: type 0xa5, start 63, end = 8885267, size 8885205 : OK > wd0s1: type 0xb, start 63, end = 6152894, size 6152832 : OK > wd0s2: type 0x5, start 6152895, end = 8385929, size 2233035 : OK > wd0s5: type 0xb, start 6152958, end = 8385929, size 2232972 : OK > ffs_mountfs: superblock updated for soft updates > Linux-ELF exec handler installed > > --ELM910942479-25570-0_ > Content-Type: text/plain; charset=ISO-8859-1 > Content-Disposition: attachment; filename=pnp1 > Content-Description: dmesg after installing new kernel > Content-Transfer-Encoding: 7bit > > DMESG after new kernel installed: > > ebus=0 secondarybus=0 > intpin=a, irq=9 > map[0]: type 4, range 32, base 0000d400, size 8 > map[1]: type 1, range 32, base e7000000, size 8 > map[2]: type 1, range 32, base e6800000, size 12 > ncr0: rev 0x03 int a irq 9 on pci0.10.0 > ncr0: minsync=12, maxsync=137, maxoffs=16, 128 dwords burst, large dma fifo > ncr0: single-ended, open drain IRQ driver, using on-chip SRAM > found-> vendor=0x5333, dev=0x8a01, revid=0x01 > class=03-00-00, hdrtype=0x00, mfdev=0 > subordinatebus=0 secondarybus=0 > intpin=a, irq=11 > map[0]: type 1, range 32, base e0000000, size 26 > vga0: rev 0x01 int a irq 11 on pci0.11.0 > Initializing PnP override table > Probing for PnP devices: > Trying Read_Port at 203 > Trying Read_Port at 243 > PnP: CSN 1 COMP_DEVICE_ID = 0x2fb0d041 > CSN 1 Vendor ID: CTL00c1 [0xc1008c0e] Serial 0x1641e094 Comp ID: PNPb02f [0x2fb0d041] > Called nullpnp_probe with tag 0x00000001, type 0xc1008c0e > Called nullpnp_probe with tag 0x00000001, type 0x2fb0d041 > Probing for devices on the ISA bus: > video: RTC equip. code:0x0f, DCC code:0x09 > video: CRTC:0x3d4, video option:0x60, rows:80, cols:25, font height:16 > video: param table EGA/VGA:0xf00c4644, CGA/MDA:0 > video: rows_offset:1 > video#0: adapter type:VGA (5), flags:0x7f, CRTC:0x3d4 > video#0: init mode:24, bios mode:3, current mode:24 > video#0: window:0xf00b8000 size:32k gran:32k, buf:0xf0000000 size:0k > video#0: mode:0, flags:0x1 T 40x25, font:8x8, win:0xb8000 > video#0: mode:1, flags:0x1 T 40x25, font:8x8, win:0xb8000 > video#0: mode:2, flags:0x1 T 80x25, font:8x8, win:0xb8000 > video#0: mode:3, flags:0x1 T 80x25, font:8x8, win:0xb8000 > video#0: mode:19, flags:0x1 T 40x25, font:8x14, win:0xb8000 > video#0: mode:20, flags:0x1 T 40x25, font:8x14, win:0xb8000 > video#0: mode:21, flags:0x1 T 80x25, font:8x14, win:0xb8000 > video#0: mode:22, flags:0x1 T 80x25, font:8x14, win:0xb8000 > video#0: mode:23, flags:0x1 T 40x25, font:8x16, win:0xb8000 > video#0: mode:25, flags:0x0 T 80x25, font:8x16, win:0xb0000 > video#0: mode:24, flags:0x1 T 80x25, font:8x16, win:0xb8000 > video#0: mode:7, flags:0x0 T 80x25, font:8x14, win:0xb0000 > video#0: mode:112, flags:0x1 T 80x43, font:8x8, win:0xb8000 > video#0: mode:113, flags:0x1 T 80x43, font:8x8, win:0xb8000 > video#0: mode:33, flags:0x0 T 80x30, font:8x16, win:0xb0000 > video#0: mode:32, flags:0x1 T 80x30, font:8x16, win:0xb8000 > video#0: mode:31, flags:0x0 T 80x50, font:8x8, win:0xb0000 > video#0: mode:30, flags:0x1 T 80x50, font:8x8, win:0xb8000 > video#0: mode:35, flags:0x0 T 80x60, font:8x8, win:0xb0000 > video#0: mode:34, flags:0x1 T 80x60, font:8x8, win:0xb8000 > video#0: mode:4, flags:0x3 G 320x200x2, 1 plane(s), font:8x8, win:0xb8000 > video#0: mode:5, flags:0x3 G 320x200x2, 1 plane(s), font:8x8, win:0xb8000 > video#0: mode:6, flags:0x3 G 640x200x1, 1 plane(s), font:8x8, win:0xb8000 > video#0: mode:13, flags:0x3 G 320x200x4, 4 plane(s), font:8x8, win:0xa0000 > video#0: mode:14, flags:0x3 G 640x200x4, 4 plane(s), font:8x8, win:0xa0000 > video#0: mode:15, flags:0x2 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000 > video#0: mode:17, flags:0x2 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000 > video#0: mode:16, flags:0x3 G 640x350x2, 2 plane(s), font:8x14, win:0xa0000 > video#0: mode:18, flags:0x3 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000 > video#0: mode:26, flags:0x3 G 640x480x4, 4 plane(s), font:8x16, win:0xa0000 > video#0: mode:27, flags:0x3 G 640x480x4, 4 plane(s), font:8x16, win:0xa0000 > video#0: mode:28, flags:0x3 G 320x200x8, 1 plane(s), font:8x8, win:0xa0000 > video#0: mode:37, flags:0x3 G 320x240x8, 1 plane(s), font:8x8, win:0xa0000 > VGA parameters upon power-up > 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > VGA parameters in BIOS for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > EGA/VGA parameters to be used for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > sc0: the current keyboard controller command byte 0047 > kbdio: DIAGNOSE status:0055 > kbdio: TEST_KBD_PORT status:0000 > kbdio: RESET_KBD return code:00fa > kbdio: RESET_KBD status:00aa > sc0: keyboard device ID: ab41 > sc0 at 0x60-0x6f irq 1 on motherboard > sc0: VGA color <16 virtual consoles, flags=0x0> > sio0: irq maps: 0x1 0x11 0x1 0x1 > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > sio0: type 16550A > lpt0 at 0x378-0x37f irq 7 on isa > lpt0: Interrupt-driven port > lp0: TCP/IP capable interface > bpf: lp0 attached > psm0: current command byte:0047 > kbdio: TEST_AUX_PORT status:0000 > kbdio: RESET_AUX return code:00fa > kbdio: RESET_AUX status:00aa > kbdio: RESET_AUX ID:0000 > psm: status 00 02 64 > psm: status 00 00 64 > psm: status 00 03 64 > psm: status 00 03 64 > psm: status 10 00 64 > psm: data 08 00 00 > psm: data 08 00 00 > psm: status 00 02 64 > psm0 at 0x60-0x64 irq 12 on motherboard > psm0: model Generic PS/2 mouse, device ID 0, 2 buttons > psm0: config:00000000, flags:00000000, packet size:3 > psm0: syncmask:c0, syncbits:00 > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > fdc0: FIFO enabled, 8 bytes threshold > fd0: 1.44MB 3.5in > wdc0 at 0x1f0-0x1f7 irq 14 on isa > wdc0: unit 0 (wd0): > wd0: 4110MB (8418816 sectors), 14848 cyls, 9 heads, 63 S/T, 512 B/S > wd0: ATA INQUIRE valid = 0007, dmamword = 0007, apio = 0003, udma = 0407 > wdc1 at 0x170-0x177 irq 15 on isa > wdc1: unit 0 (atapi): , removable, intr, iordy > wcd0: 689KB/sec, 256KB cache, audio play, 255 volume levels, ejectable tray > wcd0: 120mm audio disc loaded, unlocked > 1 3C5x9 board(s) on ISA found at 0x210 > ep0 at 0x210-0x21f irq 5 on isa > ep0: aui/bnc[*BNC*] address 00:60:8c:62:a5:65 > bpf: ep0 attached > sb0 at 0x220 irq 10 drq 3 on isa > snd0: > sbxvi0 at ? drq 5 on isa > snd0: > sbmidi0 at 0x300 on isa > snd0: > awe0 at 0x620 on isa > AWE32: not detected > > opl0 at 0x388 on isa > snd0: > joy0 at 0x200 on isa > joy0: joystick > npx0 on motherboard > npx0: INT 16 interface > i586_bzero() bandwidth = 175654312 bytes/sec > bzero() bandwidth = 88409512 bytes/sec > imasks: bio c008c040, tty c0031092, net c0060020 > BIOS Geometries: > 0:020afe3f 0..522=523 cylinders, 0..254=255 heads, 1..63=63 sectors > 1:03fd893f 0..1021=1022 cylinders, 0..137=138 heads, 1..63=63 sectors > 0 accounted for > Device configuration finished. > Intel Pentium F00F detected, installing workaround > bpf: tun0 attached > bpf: tun1 attached > bpf: tun2 attached > bpf: tun3 attached > bpf: lo0 attached > Waiting 15 seconds for SCSI devices to settle > ncr0: restart (scsi reset). > (probe5:ncr0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0 > (probe5:ncr0:0:5:0): ILLEGAL REQUEST asc:24,0 > (probe5:ncr0:0:5:0): Invalid field in CDB sks:c0,1 > pass0 at ncr0 bus 0 target 0 lun 0 > pass0: Fixed Direct Access SCSI2 device > pass0: Serial Number JKA5580002KB3M > pass0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled > pass1 at ncr0 bus 0 target 5 lun 0 > pass1: Removable CD-ROM SCSI2 device > pass1: 3.300MB/s transfers > da0 at ncr0 bus 0 target 0 lun 0 > da0: Fixed Direct Access SCSI2 device > da0: Serial Number JKA5580002KB3M > da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled > da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) > cd0 at ncr0 bus 0 target 5 lun 0 > cd0: Removable CD-ROM SCSI2 device > cd0: 3.300MB/s transfers > cd0: cd present [327689 x 2048 byte records] > Considering FFS root f/s. > changing root device to da0s1a > da0s1: type 0xa5, start 63, end = 8885267, size 8885205 : OK > wd0s1: type 0xb, start 63, end = 6152894, size 6152832 : OK > wd0s2: type 0x5, start 6152895, end = 8385929, size 2233035 : OK > wd0s5: type 0xb, start 6152958, end = 8385929, size 2232972 : OK > ffs_mountfs: superblock updated for soft updates > Linux-ELF exec handler installed > > --ELM910942479-25570-0_-- > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hackers" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message