From owner-freebsd-stable Sat Jan 26 20:11:53 2002 Delivered-To: freebsd-stable@freebsd.org Received: from rwcrmhc53.attbi.com (rwcrmhc53.attbi.com [204.127.198.39]) by hub.freebsd.org (Postfix) with ESMTP id 3D6BC37B400 for ; Sat, 26 Jan 2002 20:11:47 -0800 (PST) Received: from attbi.com ([12.237.33.57]) by rwcrmhc53.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020127041146.MNAC10199.rwcrmhc53.attbi.com@attbi.com> for ; Sun, 27 Jan 2002 04:11:46 +0000 Message-ID: <3C537E08.75C8A1B5@attbi.com> Date: Sat, 26 Jan 2002 22:11:52 -0600 From: Joe Halpin X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.4.2-2 i686) X-Accept-Language: en MIME-Version: 1.0 Cc: freebsd-stable@FreeBSD.ORG Subject: Re: FreeBSD install doesn't see the whole disk References: <3C533643.E161CC67@attbi.com> <3C534AEB.A24D9707@attbi.com> <3C535AA5.5060803@owt.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Kent Stewart wrote: > > Joe Halpin wrote: > > > Joe Halpin wrote: > > > >>I just put a new 30GB drive in my test machine (Maxtor IDE). When I > >>tried to install, fdisk didn't get the drive size right. So I used the > >>'G' option and set the drive geometry manually. The summary at the top > >>of the screen looked correct after that, but the 'C' create option > >>apparently didn't get updated, and wouldn't let me create more than a > >>2GB partition. > >> > > > > A little more detail: > > > > Both Windows and Linux installation programs recognised the disk size > > correctly. The BIOS likewise gives the correct size and says it's in LBA > > mode (which it is). > > > > I had RedHat 7.1 installed on the disk previously. I first booted from a > > 4.5RC2 iso image I had successfully used before. Then I tried creating a > > DOS partition and installing DOS first, then tried the 4.5RC2 CD again. > > No go. > > > > Then I downloaded new boot floppy images from ftp://ftp.freebsd.org/ > > but they had the same problem. > > Check the jumpers on the HD and see if you have csel selected. It > comes that way on some of the drives and the 2GB is a symptom. I double-checked the instructions that came with the drive and it looked like it was setup correctly as a master (there is no second HD at this point). However, after looking looking through the box the drive came in, and finding another data sheet, I saw a different set of jumper settings. I tried those, and fdisk now recognizes the correct drive size. I don't know much about hardware, but I'm at a loss to know why there would be two different sets of instructions for setting jumpers on one hard drive. At any rate, thanks very much, the jumper settings were the problem. Joe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message