Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 5 Oct 1995 11:05:25 +0100
From:      se@zpr.uni-koeln.de (Stefan Esser)
To:        Chris Madison <root@tippy.vnet.net>
Cc:        current@freebsd.org
Subject:   Re: SCSI and current
Message-ID:  <199510051005.AA00354@Sysiphos>
In-Reply-To: Chris Madison <root@tippy.vnet.net> "Re: SCSI and current" (Oct  4, 23:34)

next in thread | previous in thread | raw e-mail | index | archive | help
On Oct 4, 23:34, Chris Madison wrote:
} Subject: Re: SCSI and current
} > 
} > Please check your kernel config file, and rebuild your kernel for
} > device ahc0 being defined and try again.
} > 
} > Let me know, if this doesn't work.
} > 
} > The default GUS interrupt vector has been changed to 11, according 
} > to some recent commit message. You may want to build a kernel without
} > audio support, in case you have it configured in currently ...
} 
} Okay I finally built alsorts of kernels and they all failed at the same
} place:-(  What I did first was look at how my sound was configured and
} noticed in the latest LINT that the gus is on irq12, so I configured
} it that way.  Then the same thing happened as before.  So the next
} step I tried to was to take all the sound config info.  This also failed
} in the same place.  My video card is pci and is using irq 10 and the
} 2940 is using irq 11, should I try and swap these around whether physically
} or otherwise and see if that works?

Please send me your kernel config file.

I suspect there is some inconsistency.

Regards, STefan

-- 
 Stefan Esser, Zentrum fuer Paralleles Rechnen		Tel:	+49 221 4706021
 Universitaet zu Koeln, Weyertal 80, 50931 Koeln	FAX:	+49 221 4705160
 ==============================================================================
 http://www.zpr.uni-koeln.de/staff/esser/esser.html	  <se@ZPR.Uni-Koeln.DE>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199510051005.AA00354>