From owner-freebsd-sparc64@FreeBSD.ORG Sun Mar 22 09:24:19 2009 Return-Path: Delivered-To: freebsd-sparc64@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9F1771065672; Sun, 22 Mar 2009 09:24:19 +0000 (UTC) (envelope-from andreast-list@fgznet.ch) Received: from smtp.fgznet.ch (mail.fgznet.ch [81.92.96.47]) by mx1.freebsd.org (Postfix) with ESMTP id 2021D8FC0A; Sun, 22 Mar 2009 09:24:18 +0000 (UTC) (envelope-from andreast-list@fgznet.ch) Received: from wolfram.andreas.nets ([91.190.8.131]) by smtp.fgznet.ch (8.13.8/8.13.8/Submit_SMTPAUTH) with ESMTP id n2M9NrEr000905; Sun, 22 Mar 2009 10:23:53 +0100 (CET) (envelope-from andreast-list@fgznet.ch) Message-ID: <49C603A8.2010805@fgznet.ch> Date: Sun, 22 Mar 2009 10:23:52 +0100 From: Andreas Tobler User-Agent: Thunderbird 2.0.0.19 (Macintosh/20081209) MIME-Version: 1.0 To: Marius Strobl References: <49C55EBC.1070602@fgznet.ch> <20090321232030.GA70685@alchemy.franken.de> In-Reply-To: <20090321232030.GA70685@alchemy.franken.de> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Scanned-By: MIMEDefang 2.64 on 81.92.96.47 Cc: freebsd-current , freebsd-sparc64@freebsd.org Subject: Re: kdb enter when upgrading from 7.1 to current. X-BeenThere: freebsd-sparc64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the Sparc List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 22 Mar 2009 09:24:20 -0000 Marius Strobl wrote: > On Sat, Mar 21, 2009 at 10:40:12PM +0100, Andreas Tobler wrote: >> Hi, >> >> I get this stacktrace when I try to boot from a Kernel as of today (svn: >> 190217). >> >> My setup is a 7.1 install where I'd like to upgrade to current. >> The kernel is built cross, amd64 -> sparc64: >> make -j4 buildkernel TARGET_ARCH=sparc64 KERNCONF=GENERIC >> >> The target machine itself is a u60, details below. >> >> Does anyone have a pointer to help me, would be great! >> >> TIA, >> Andreas >> >> Hit [Enter] to boot immediately, or any other key for command prompt. >> Booting [/boot/kernel/kernel]... >> jumping to kernel entry at 0xc0080000. >> GDB: no debug ports present >> KDB: debugger backends: ddb >> KDB: current backend: ddb >> Copyright (c) 1992-2009 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 8.0-CURRENT #2 r190217M: Sat Mar 21 22:27:46 CET 2009 >> >> andreast@deuterium_fbsd.andreas.nets:/export/devel/obj/sparc64/export/devel/ >> fbsd_svn/src/sys/GENERIC >> WARNING: WITNESS option enabled, expect reduced performance. >> real memory = 1610612736 (1536 MB) >> avail memory = 1554710528 (1482 MB) >> cpu0: Sun Microsystems UltraSparc-II Processor (449.99 MHz CPU) >> ispfw: registered firmware >> ispfw: registered firmware >> ispfw: registered firmware >> ispfw: registered firmware >> ispfw: registered firmware >> ispfw: registered firmware >> ispfw: registered firmware >> ispfw: registered firmware >> ispfw: registered firmware >> ispfw: registered firmware >> ispfw: registered firmware >> ispfw: registered firmware >> kbd0 at kbdmux0 >> nexus0: >> pcib0: mem >> 0x1fe00004000-0x1fe00005fff,0x1fe01000000-0x1fe0 >> 10000ff,0x1fe00000000-0x1fe0000cfff irq 2033,2030,2031,2021,2024,2034 on >> nexus0 >> pcib0: Psycho, impl 0, version 4, IGN 0x1f, bus B, 33MHz >> initializing counter-timer >> Timecounter "pcib0" frequency 1000000 Hz quality 100 >> pcib0: DVMA map: 0xfc000000 to 0xffffffff, streaming buffer >> pcib0: [FILTER] >> pcib0: [FILTER] >> pcib0: [GIANT-LOCKED] >> pcib0: [ITHREAD] >> pcib0: [GIANT-LOCKED] >> pcib0: [ITHREAD] >> pcib0: [FILTER] >> pci0: on pcib0 >> ebus0: mem >> 0x70000000-0x70ffffff,0x71000000-0x717fffff at dev >> ice 1.0 on pci0 >> auxio0: addr >> 0x1400726000-0x1400726003,0x1400728000-0x140072 >> 8003,0x140072a000-0x140072a003,0x140072c000-0x140072c003,0x140072f000-0x140072f0 >> 03 on ebus0 >> ebus0: addr 0x1400724000-0x1400724003 (no driver attached) >> ebus0: addr 0x1400504000-0x1400504002 (no driver attached) >> ebus0: addr 0x1400500000-0x1400500007 (no driver attached) >> scc0: addr >> 0x1400400000-0x140040007f irq 43 >> on ebus0 >> scc0: [FILTER] >> uart0: on scc0 >> uart0: [FILTER] >> uart0: CTS oflow >> uart0: console (9600,n,8,1) >> uart1: on scc0 >> uart1: [FILTER] >> uart1: CTS oflow >> uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0 >> uart2: [FILTER] >> uart2: keyboard (1200,n,8,1) >> uart2: keyboard not present >> uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0 >> uart3: [FILTER] >> ebus0: addr >> 0x14003043bc-0x14003043cb,0x1400300398-0x1400300399,0x1400700 >> 000-0x140070000f irq 34 (no driver attached) >> ebus0: addr >> 0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0x1400 >> 720000-0x1400720003 irq 39 (no driver attached) >> eeprom0: addr 0x1400000000-0x1400001fff on ebus0 >> eeprom0: model mk48t59 >> ebus0: addr 0x1000000000-0x10000fffff (no driver attached) >> ebus0: addr >> 0x1400200000-0x14002000ff,0x1400702000-0x140070200f,0x >> 1400704000-0x140070400f,0x1400722000-0x1400722003 irq 35,36 (no driver >> attached) >> hme0: mem 0x100000-0x107fff at device 1.1 on pci0 >> miibus0: on hme0 >> qsphy0: PHY 1 on miibus0 >> qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> hme0: Ethernet address: 08:00:20:a3:71:69 >> hme0: [ITHREAD] >> sym0: <875> port 0x1000-0x10ff mem 0x108000-0x1080ff,0x10a000-0x10afff >> at device >> 3.0 on pci0 >> sym0: No NVRAM, ID 7, Fast-20, SE, parity checking >> sym0: [ITHREAD] >> sym1: <875> port 0x1400-0x14ff mem 0x10c000-0x10c0ff,0x10e000-0x10efff >> at device >> 3.1 on pci0 >> sym1: No NVRAM, ID 7, Fast-20, SE, parity checking >> sym1: [ITHREAD] >> pcib1: mem >> 0x1fe00002000-0x1fe00003fff,0x1fe01800000-0x1fe0 >> 18000ff,0x1fe00000000-0x1fe0000cfff irq 2032,2030,2031,2021,2024,2034 on >> nexus0 >> pcib1: Psycho, impl 0, version 4, IGN 0x1f, bus A, 66MHz >> pcib1: [FILTER] >> pci1: on pcib1 >> pci1: at device 1.0 (no driver attached) >> creator0: mem >> 0x1fc00000000-0x1fc000003ff,0x1fc00400000-0x1fc005ffff >> f,0x1fc00600000-0x1fc007fffff,0x1fc01000000-0x1fc013fffff,0x1fc01400000-0x1fc017 >> fffff,0x1fc01800000-0x1fc01bfffff,0x1fc01c00000-0x1fc01ffffff,0x1fc02000000-0x1f >> c02ffffff,0x1fc03000000-0x1fc03ffffff,0x1fc04000000-0x1fc043fffff,0x1fc04400000- >> 0x1fc047fffff,0x1fc04800000-0x1fc04bfffff,0x1fc04c00000-0x1fc04ffffff,0x1fc05000 >> 000-0x1fc05ffffff,0x1fc06000000-0x1fc07ffffff,0x1fc09000000-0x1fc097fffff,0x1fc0 >> 9800000-0x1fc09ffffff,0x1fc0a000000-0x1fc0affffff,0x1fc0b000000-0x1fc0b7fffff,0x >> 1fc0b800000-0x1fc0bffffff,0x1fc0c000000-0x1fc0c3fffff,0x1fc0c800000-0x1fc0cfffff >> f,0x1fc0d000000-0x1fc0d7fffff,0x1fc0d800000-0x1fc0dffffff irq 1925 on nexus0 >> creator0: resolution 1152x900 >> syscons0: on nexus0 >> syscons0: Unknown <16 virtual consoles, flags=0x100> >> Timecounter "tick" frequency 449992390 Hz quality 1000 >> Timecounters tick every 1.000 msec >> Waiting 5 seconds for SCSI devices to settle >> (probe6:sym0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 >> (probe6:sym0:0:6:0): CAM Status: SCSI Status Error >> (probe6:sym0:0:6:0): SCSI Status: Check Condition >> (probe6:sym0:0:6:0): NOT READY asc:3a,0 >> (probe6:sym0:0:6:0): Medium not present >> (probe6:sym0:0:6:0): Unretryable error >> da1 at sym0 bus 0 target 1 lun 0 >> da1: Fixed Direct Access SCSI-2 device >> da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) >> da1: Command Queueing Enabled >> da1: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) >> da0 at sym0 bus 0 target 0 lun 0 >> da0: Fixed Direct Access SCSI-2 device >> da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) >> da0: Command Queueing Enabled >> da0: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) >> cd0 at sym0 bus 0 target 6 lun 0 >> cd0: Removable CD-ROM SCSI-2 device >> cd0: 10.000MB/s transfers (10.000MHz, offset 16) >> cd0: Attempt to query device size failed: NOT READY, Medium not present >> WARNING: WITNESS option enabled, expect reduced performance. >> GEOM: da0: adding VTOC8 information. >> GEOM: da1: adding VTOC8 information. >> Trying to mount root from ufs:/dev/da0a >> Loading configuration files. >> kernel dumps on /dev/da0b >> Entropy harvesting: interrupts ethernet point_to_pointpanic: trap: >> memory addres >> s not aligned >> cpuid = 0 >> KDB: enter: panic >> [thread pid 41 tid 100042 ] >> Stopped at kdb_enter+0x80: ta %xcc, 1 >> db> >> db> bt >> Tracing pid 41 tid 100042 td 0xfffff800213dc370 >> panic() at panic+0x20c >> trap() at trap+0x570 >> -- memory address not aligned sfar=0xf2fe2877 sfsr=0x40029 %o7=0xc06654b8 -- >> stack_capture() at stack_capture+0x114 >> stack_save_td() at stack_save_td+0x60 >> sysctl_kern_proc_kstack() at sysctl_kern_proc_kstack+0x36c >> sysctl_root() at sysctl_root+0x1ec >> userland_sysctl() at userland_sysctl+0x174 >> __sysctl() at __sysctl+0x70 >> syscall() at syscall+0x2f0 >> -- syscall (202, FreeBSD ELF64, __sysctl) %o7=0x101628 -- >> userland() at 0x40445788 >> user trace: trap %o7=0x101628 >> pc 0x40445788, sp 0x7fdffffd031 >> pc 0x101ef8, sp 0x7fdffffd971 >> pc 0x102ac4, sp 0x7fdffffdaf1 >> pc 0x100ef0, sp 0x7fdffffe451 >> pc 0x40208094, sp 0x7fdffffe511 >> done > > Hrm, this looks like the problem solved with r184376. Do you > cross-compile with a GCC older than 4.2 maybe? No, I cross compile on current. cc -v: Using built-in specs. Target: amd64-undermydesk-freebsd Configured with: FreeBSD/amd64 system compiler Thread model: posix gcc version 4.2.1 20070719 [FreeBSD] I continue. Thx, Andreas