From owner-freebsd-mobile Tue Oct 30 10:53:50 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from mountain.dogwood.com (mountain.dogwood.com [63.96.228.133]) by hub.freebsd.org (Postfix) with ESMTP id DDCCA37B403 for ; Tue, 30 Oct 2001 10:53:41 -0800 (PST) Received: (from dave@localhost) by mountain.dogwood.com (8.11.6/8.11.6) id f9UIrjI06313 for freebsd-mobile@freebsd.org; Tue, 30 Oct 2001 10:53:45 -0800 (PST) (envelope-from dave) From: Dave Cornejo Message-Id: <200110301853.f9UIrjI06313@mountain.dogwood.com> Subject: compact flash & newcard To: freebsd-mobile@freebsd.org Date: Tue, 30 Oct 2001 10:53:45 -0800 (PST) X-Mailer: ELM [version 2.4ME+ PL94c (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Howdy, I'm trying to use a SanDisk Compact Flash card with the SanDisk PCMCIA adapter on a Toshiba T7200CT with a freshly cvsupped & built kernel. This kernel has been patched to allow my Aironet card to be recognized, and that works. The problem is that when I insert the CF/Adapter no devices are created for it but I do get output. I've fiddled with the pccard.conf file to try and get it to work to no avail. First question: should this work? Second question: if it should work, any clues on what I'm doing wrong? Below is the dmesg output for the boot - the Aironet card is not installed, but a 3Com Ethernet/Modem card and the CF+Adapter are: Thanks, dave c Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #4: Tue Oct 30 10:11:30 PST 2001 dave@whimper.cisco.com:/usr/obj/usr/src/sys/LAPTOP Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 597071737 Hz CPU: Pentium III/Pentium III Xeon/Celeron (597.07-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x383f9ff real memory = 201195520 (196480K bytes) avail memory = 190070784 (185616K bytes) Preloaded elf kernel "/boot/kernel/kernel" at 0xc046b000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc046b0a8. Pentium Pro MTRR support enabled Using $PIR table, 8 entries at 0xc00f0190 npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0 acpi_cpu0: on acpi0 acpi_tz0: on acpi0 acpi_pcib0: port 0xcf8-0xcff on acpi0 pci0: on acpi_pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) isab0: at device 5.0 on pci0 isa0: on isab0 atapci0: port 0xfff0-0xffff at device 5.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0xff80-0xff9f irq 11 at device 5.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at device 5.3 (no driver attached) pci0: at device 7.0 (no driver attached) pci0: at device 9.0 (no driver attached) pccbb0: at device 11.0 on pci0 pccbb0: PCI Memory allocated: 10000000 acpi_pcib0: device is routed to IRQ 11 cardbus0: on pccbb0 pccard0: <16-bit PCCard bus> on pccbb0 pccbb1: at device 11.1 on pci0 pccbb1: PCI Memory allocated: 10001000 acpi_pcib0: device is routed to IRQ 11 cardbus1: on pccbb1 pccard1: <16-bit PCCard bus> on pccbb1 pcm0: port 0xfc00-0xfcff irq 11 at device 12.0 on pci0 acpi_lid0: on acpi0 acpi_cmbat0: on acpi0 acpi_acad0: on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77a,0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 orm0: