Date: Mon, 30 May 2005 12:22:01 -0700 From: "D. Goss" <lists@dylangoss.com> To: freebsd-questions@freebsd.org Subject: help with corrupted MAC error Message-ID: <C9EDB80C-A5F0-496D-BDD5-C16B8A204068@dylangoss.com>
next in thread | raw e-mail | index | archive | help
Hi -
I need some help please. I'm running FreeBSD 5.3 on an xSeries 345.
I am not running 5.4 as I need to use some software that currently
supports 5.3. I have a clean installation yet when I attempt to do
large file transfers (I am doing "make install" in the ports tree)
the transfer dies and I am disconnected from my SSH login with:
perl-5.8.5.tar.bz2 43% of 9242 kB 115
kBps 00m45s
Disconnecting: Corrupted MAC on input.
This is pretty consistant with any larger (over 1MB or so) download
that the machine is doing. I've searched and other than
understanding this is a network problem I don't know where to look.
For the sake of it I ended up upgrading my router firmware as I read
somewhere about a Linksys issue - I am now current on the firmware
(the machine is sitting on the DMZ address of the router). I have
swapped ethernet cables and generally looked at my physical network.
The dmesg for the machine is below. Anyone with advice if you could
please over-explain a bit it would be appreciated. I am pretty new
to FreeBSD and working my way through plenty of books and Googling.
I'm not completely sure how to check if my network interface driver
is the most current or how to change it.
Thank you!
-------
$ dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.90-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 536715264 (511 MB)
avail memory = 515530752 (491 MB)
ACPI APIC Table: <IBM SERONYXP>
MADT: Forcing active-low polarity and level trigger for SCI
ioapic2 <Version 1.1> irqs 32-47 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic0 <Version 1.1> irqs 0-15 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM SERONYXP> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 460, 2 (4) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x488-0x48b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 5.0 (no driver attached)
atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x700-0x70f,
0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfebef000-0xfebeffff irq
11 at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
isab0: <PCI-ISA bridge> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI Host-PCI bridge> on acpi0
pci6: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0x2500-0x253f mem 0xeffe0000-0xefffffff irq 29 at device 8.0 on pci6
em0: Ethernet address: 00:09:6b:09:b9:66
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0x2540-0x257f mem 0xeffc0000-0xeffdffff irq 30 at device 8.1 on pci6
em1: Ethernet address: 00:09:6b:09:b9:67
em1: Speed:N/A Duplex:N/A
pcib4: <ACPI Host-PCI bridge> on acpi0
pci8: <ACPI PCI bus> on pcib4
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2600-0x26ff mem
0xedfe0000-0xedfeffff,0xedff0000-0xedffffff irq 27 at device 7.0 on pci8
mpt0: [GIANT-LOCKED]
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x2700-0x27ff mem
0xedfc0000-0xedfcffff,0xedfd0000-0xedfdffff irq 28 at device 7.1 on pci8
mpt1: [GIANT-LOCKED]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: unable to set the command byte.
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: unable to set the command byte.
fdc0: <floppy drive controller> port 0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem 0xcc800-0xd07ff,0xcb000-0xcc7ff,
0xc0000-0xcafff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounter "TSC" frequency 2793902912 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDROM <LG CD-ROM CRN-8245B/1.16> at ata0-master UDMA33
Waiting 15 seconds for SCSI devices to settle
ses0 at mpt0 bus 0 target 8 lun 0
ses0: <IBM 32P0032a S320 1 1> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at mpt0 bus 0 target 0 lun 0
da0: <IBM-PSG ST318436LC !# 3281> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged
Queueing Enabled
da0: 17357MB (35548320 512 byte sectors: 255H 63S/T 2212C)
Mounting root from ufs:/dev/da0s1a
em0: Link is up 10 Mbps Half Duplex
$
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C9EDB80C-A5F0-496D-BDD5-C16B8A204068>