From owner-freebsd-hardware Tue Jan 28 17:35:06 1997 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id RAA29348 for hardware-outgoing; Tue, 28 Jan 1997 17:35:06 -0800 (PST) Received: from cabri.obs-besancon.fr (cabri.obs-besancon.fr [193.52.184.3]) by freefall.freebsd.org (8.8.5/8.8.5) with SMTP id RAA29244 for ; Tue, 28 Jan 1997 17:34:39 -0800 (PST) Received: by cabri.obs-besancon.fr (5.57/Ultrix3.0-C) id AA08460; Wed, 29 Jan 97 02:36:30 +0100 Date: Wed, 29 Jan 97 02:36:30 +0100 Message-Id: <9701290136.AA08460@cabri.obs-besancon.fr> From: Jean-Marc Zucconi To: hardware@freebsd.org Subject: ET3000 + AHA 1542B X-Mailer: Emacs Sender: owner-hardware@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi, Is there a known incompatibility between those 2 boards? I have a machine which will not boot with an et3000 vga card and an adaptec 1542B. The machine locks after aha0: Rev 41 (AHA-154x[AB]) V0.5, enabling residuals, target ops aha0: reading board settings, dma=5 int=12 id=7 (bus speed defaulted) aha0 at 0x330-0x333 irq 12 drq 5 on isa aha0 waiting for scsi devices to settle The led on the adaptec stay on and I have to use the power swich to reset the machine. Booting with only the adaptec works, booting with only the et3000 works. I have tried 2 differents IRQs (11 and 12) for the 1542 with no luck. Moving the cards in different slots does not help either. Any idea? Jean-Marc _____________________________________________________________________________ Jean-Marc Zucconi Observatoire de Besancon F 25010 Besancon cedex PGP Key: finger jmz@cabri.obs-besancon.fr =============================================================================