Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 10 Apr 1998 22:34:53 -0700
From:      Arve Ronning <arve.ronning@ah.telia.no>
To:        Eric Feillant <Eric.Feillant@EUnet-Bretagne.fr>
Cc:        freebsd-isdn@FreeBSD.ORG
Subject:   Re: I4B & NAT
Message-ID:  <352F00FD.14AE@ah.telia.no>

next in thread | raw e-mail | index | archive | help
Eric Feillant wrote:
> 
> Can u send me u'r config file ? ( Natd.cf, ipfw.cf or rc.firewall, etc...)
> 
> Eric.
> 

Ok...
------------- rc.firewall -------
# ISDN
/usr/sbin/natd -log -interface isppp0
/sbin/ifconfig isppp0 down
/sbin/ipfw -f flush
/sbin/ipfw add divert natd all from any to any via isppp0
/sbin/ipfw add pass all from any to any
---------------------------------

In case you need them, I also include rc.conf and isdnd.rc.

TIA & Regards
  -Arve



------------- rc.conf -----------
#!/bin/sh
#

# This is rc.conf - a file full of useful variables that you can set 
# to change the default startup behavior of your system.
#
# All arguments must be in double or single quotes.
#
#	$Id: rc.conf,v 1.1.2.27 1997/10/18 10:07:26 jkh Exp $

##############################################################
### Important initial Boot-time options  #####################
##############################################################

swapfile="NO"		# Set to name of swapfile if aux swapfile desired.
apm_enable="NO"		# Set to YES if you want APM enabled.
pccard_enable="NO"	# Set to YES if you want to configure PCCARD devices.
pccard_mem="DEFAULT"	# If pccard_enable=YES, this is card memory
address.
pccard_ifconfig="NO"	# Specialized pccard ethernet configuration (or
NO).
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d"	# startup script
dirs.


##############################################################
###  Network configuration sub-section  ######################
##############################################################

### Basic network options: ###
hostname="Gate.home.no"	# Set this!
nisdomainname="NO"		# Set to NIS domain if using NIS (or NO).
firewall_enable="YES" # ISDN	# Set to YES to enable firewall
functionality
#firewall_type="UNKNOWN"		# Firewall type (see /etc/rc.firewall)
firewall_type="OPEN"  # ISDN
firewall_quiet="NO"		# Set to YES to suppress rule display
tcp_extensions="YES"		# Allow RFC1323 & RFC1644 extensions (or NO).
network_interfaces="ed1 isppp0 lo0" # List of network
interfaces(lo0=loopback).
ifconfig_ed1="inet 172.16.3.10  netmask 255.255.255.0"
ifconfig_isppp0="link1 0.0.0.0 0.0.0.1 netmask 0xffffff00 debug" # ISDN
ifconfig_lo0="inet 127.0.0.1"	# default loopback device configuration.
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample
alias entry.

### Network daemon (miscellaneous) & NFS options: ###
syslogd_enable="YES"		# Run syslog daemon (or NO).
syslogd_flags=""		# Flags to syslogd (if enabled).
inetd_enable="YES"		# Run the network daemon displatcher (or NO).
inetd_flags=""			# Optional flags to inetd.
named_enable="NO"		# Run named, the DNS server (or NO).
named_flags="-b /etc/namedb/named.boot" # Flags to named (if enabled).
kerberos_server_enable="NO"	# Run a kerberos master server (or NO).
rwhod_enable="NO"		# Run the rwho daemon (or NO).
amd_enable="NO"			# Run amd service with $amd_flags (or NO).
amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host
/etc/amd.map"
nfs_client_enable="NO"		# This host is an NFS client (or NO).
nfs_client_flags="-n 4"		# Flags to nfsiod (if enabled).
nfs_server_enable="NO"		# This host is an NFS server (or NO).
nfs_server_flags="-u -t 4"	# Flags to nfsd (if enabled).
mountd_flags="-r"		# Flags to mountd (if NFS server enabled).
nfs_reserved_port_only="NO"	# Provide NFS only on secure port (or NO).
rpc_lockd_enable="NO"		# Run NFS rpc.lockd (*broken!*) if nfs_server.
rpc_statd_enable="YES"		# Run NFS rpc.statd if nfs_server (or NO).
portmap_enable="YES"		# Run the portmapper service (or NO).
portmap_flags=""		# Flags to portmap (if enabled).
xtend_enable="NO"		# Run the X-10 power controller daemon.
xtend_flags=""			# Flags to xtend (if enabled).

### Network Time Services options: ###
timed_enable="NO"		# Run the time daemon (or NO).
timed_flags=""			# Flags to timed (if enabled).
ntpdate_enable="NO"		# Run the ntpdate to sync time (or NO).
ntpdate_flags=""		# Flags to ntpdate (if enabled).
xntpd_enable="NO"		# Run xntpd Network Time Protocol (or NO).
xntpd_flags=""			# Flags to xntpd (if enabled).
tickadj_enable="NO"		# Run tickadj (or NO).
tickadj_flags="-Aq"		# Flags to tickadj (if enabled).

# Network Information Services (NIS) options: ###
nis_client_enable="NO"		# We're an NIS client (or NO).
nis_client_flags=""		# Flags to ypbind (if enabled).
nis_ypset_enable="NO"		# Run ypset at boot time (or NO).
nis_ypset_flags=""		# Flags to ypset (if enabled).
nis_server_enable="NO"		# We're an NIS server (or NO).
nis_server_flags=""		# Flags to ypserv (if enabled).
nis_ypxfrd_enable="NO"		# Run rpc.ypxfrd at boot time (or NO).
nis_ypxfrd_flags=""		# Flags to rpc.ypxfrd (if enabled).
nis_yppasswdd_enable="NO"	# Run rpc.yppasswdd at boot time (or NO).
nis_yppasswdd_flags=""		# Flags to rpc.yppasswdd (if enabled).

### Network routing options: ###
defaultrouter="NO"		# Set to default gateway (or NO).
static_routes=""		# Set to static route list (or leave empty).
gateway_enable="YES" # ISDN	# Set to YES if this host will be a gateway.
router_enable="NO"		# Set to YES to enable a routing daemon.
router="routed"			# Name of routing daemon to use if enabled.
router_flags="-q"		# Flags for routing daemon.
mrouted_enable="NO"		# Do multicast routing (see /etc/mrouted.conf).
ipxgateway_enable="NO"		# Set to YES to enable IPX routing.
ipxrouted_enable="NO"		# Set to YES to run the IPX routing daemon.
ipxrouted_flags=""		# Flags for IPX routing daemon.
arpproxy_all=""			# obsolete kernel option ARP_PROXY_ALL equiv.


##############################################################
###  System console options  #################################
##############################################################

keymap="NO"		# keymap in /usr/share/syscons/keymaps/* (or NO).
keyrate="NO"		# keyboard rate to: slow, normal, fast (or NO).
keybell="NO"		# bell to duration.pitch or normal or visual (or NO).
keychange="NO"		# function keys default values (or NO).
cursor="NO"		# cursor type {normal|blink|destructive} (or NO).
scrnmap="NO"		# screen map in /usr/share/syscons/scrnmaps/* (or NO).
font8x16="NO"		# font 8x16 from /usr/share/syscons/fonts/* (or NO).
font8x14="NO"		# font 8x14 from /usr/share/syscons/fonts/* (or NO).
font8x8="NO"		# font 8x8 from /usr/share/syscons/fonts/* (or NO).
blanktime="NO"		# blank time (in seconds) or "NO" to turn it off.
saver="NO"		# screen saver desired: blank/green/snake/star/NO.
moused_type="NO"	# See man page for rc.conf(5) for available settings.
moused_port="/dev/cuaa0" # Set to your mouse port (required if mousetype
set).
moused_flags=""		# Any additional flags to moused.


##############################################################
###  Miscellaneous administrative options  ###################
##############################################################

cron_enable="YES"	# Run the periodic job daemon.
lpd_enable="NO"		# Run the line printer daemon.
lpd_flags=""		# Flags to lpd (if enabled).
sendmail_enable="YES"	# Run the sendmail daemon (or NO).
sendmail_flags="-bd -q30m" # -bd is pretty mandatory.
dumpdev="NO"		# Device name to crashdump to (if enabled).
check_quotas="NO"	# Check quotas (or NO).
accounting_enable="NO"	# Turn on process accounting (or NO).
ibcs2_enable="NO"	# Ibcs2 (SCO) emulation loaded at startup (or NO).
linux_enable="NO"	# Linux emulation loaded at startup (or NO).
rand_irqs="NO"		# Stir the entropy pool (eg: "5 11" or NO).

##############################################################
### Allow local configuration override at the very end here ##
##############################################################
if [ -f /etc/rc.conf.local ]; then
	. /etc/rc.conf.local
fi
---------------------------------

------------- isdnd.rc ----------
#=========================================================================
# SYSTEM section: isdnd global configuration parameters
#=========================================================================
system

useacctfile	= yes			# generate accouting info to file
acctall		= on			# generate info for everything
acctfile	= /var/log/isdnd.acct	# name & location of accounting file

rtprio		= 25			# modify isdnd's priority

#=======================================================================
# sPPP
#======================================================================
entry
name                    = PPP
usrdevicename		= isppp	
usrdeviceunit		= 0
isdncontroller  	= 0
isdnchannel		= -1
local-phone-incoming    = <my phonenumber>
local-phone-dialout     = <my phonenumber>
remote-phone-dialout    = <ISP's phonenumber>
remdial-handling	= first
dialin-reaction		= ignore
dialout-type		= normal
b1protocol		= hdlc
idletime-incoming	= 240
idletime-outgoing	= 30
ratetype		= 0  
unitlength		= 60
unitlengthsrc		= conf
dialretries		= 3
dialrandincr		= on
recoverytime		= 25
usedown			= off
downtries		= 2
downtime		= 30

---------------------------------


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?352F00FD.14AE>